{"product_id":"flair-espresso-pro-dispersion-screen","title":"Flair Espresso PRO Dispersion Screen","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso PRO Dispersion Screen is a replacement and upgrade accessory for the Flair PRO, PRO 2, and PRO 3 manual lever espresso makers, designed to sit on top of the coffee puck inside the stainless steel portafilter and promote even distribution of brew water through the grounds during extraction.\u003c\/p\u003e\n\n\u003ch2\u003eMore Even Extraction, Shot After Shot\u003c\/h2\u003e\n\u003cp\u003eUneven water flow through a coffee puck is one of the most common causes of channeling, where brew water finds the path of least resistance rather than saturating the grounds uniformly. The Flair PRO Dispersion Screen addresses this by sitting directly on top of the ground coffee in the portafilter, spreading incoming brew water across the full surface of the puck before it begins its path downward. The practical result is a more consistent extraction from edge to edge, which translates to better balance and repeatability in the cup.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for the PRO Portafilter\u003c\/h2\u003e\n\u003cp\u003eThe PRO Dispersion Screen is sized and shaped specifically for the stainless steel portafilter used across the Flair PRO family. Because it is purpose-built for these brew heads rather than adapted from a universal part, it seats correctly without modification and does not interfere with puck preparation or lever operation.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEven water distribution:\u003c\/strong\u003e Sits on top of the coffee puck to spread brew water uniformly across the grounds before extraction begins.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO-family fit:\u003c\/strong\u003e Sized specifically for the stainless steel portafilter used on the Flair PRO, PRO 2, and PRO 3.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSimple to use:\u003c\/strong\u003e Placed on top of dosed and leveled grounds; no tools or modification required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Models\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO, PRO 2, PRO 3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFits\u003c\/td\u003e\n      \u003ctd\u003eFlair stainless steel portafilter (PRO family)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.02 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe PRO Dispersion Screen suits Flair PRO, PRO 2, and PRO 3 owners who want to improve brew water distribution through the puck, or who need a replacement screen for their existing setup.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis screen is not compatible with other Flair models, including the Flair Classic, NEO, 2GO, Signature, 49 PRO, or 58 series; it fits the PRO-family stainless steel portafilter only.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this dispersion screen fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO Dispersion Screen is compatible with the Flair PRO, PRO 2, and PRO 3 manual lever espresso makers only. It is designed for the stainless steel portafilter used across that specific family and does not fit the Flair Classic, NEO, 2GO, Signature, 49 PRO, or 58 series brew heads.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhere does the dispersion screen sit during brewing?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO Dispersion Screen is placed on top of the dosed and leveled coffee grounds inside the stainless steel portafilter, before the brew head is assembled. It sits between the puck surface and the incoming brew water, spreading that water evenly across the grounds at the start of extraction.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I need any tools to use the dispersion screen?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo tools are required. The Flair PRO Dispersion Screen is simply set on top of the prepared coffee puck inside the portafilter as part of normal puck preparation. It requires no modification to the portafilter or brew head.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416887095517,"sku":"FLR-3P822463N","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/03-7c3a15-69eae61cebf5463b94c4c47a2f31c5c3-mv2-d-1600-1600-s.jpg?v=1793760951","url":"https:\/\/coffeeroastco.com\/products\/flair-espresso-pro-dispersion-screen","provider":"CoffeeRoast Co.","version":"1.0","type":"link"}