{"product_id":"flair-espresso-temperature-strips","title":"Flair Espresso Temperature Strips for Brew Heads and Steamers","description":"\u003cp class=\"product-lead\"\u003eFlair Espresso Temperature Strips are self-adhesive liquid-crystal thermometers designed to give home baristas a clear, at-a-glance temperature reading on brew heads and milk steamers. Each strip measures 2.25 x 0.5 inches and is available in two ranges: High Heat (158–212°F \/ 70–100°C) for brew head preheating, and Low Heat (77–149°F \/ 25–65°C) for milk steaming and frothing.\u003c\/p\u003e\n\n\u003ch2\u003eRead Temperature at a Glance\u003c\/h2\u003e\n\u003cp\u003eFlair Temperature Strips use a color-window display that shifts from tan or reddish-brown through green as the surface warms. The green window marks the actual temperature, the tan window sits above it, and the blue window falls below it, so you can identify your target range without a separate thermometer or guesswork. For lever espresso, knowing when the brew head has reached temperature before adding water is one of the most direct ways to improve shot-to-shot consistency.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Ranges, Two Jobs\u003c\/h2\u003e\n\u003cp\u003eThe High Heat strip covers 158–212°F (70–100°C), the range relevant to brew head preheating on manual espresso makers. The Low Heat strip covers 77–149°F (25–65°C), the range used when steaming or frothing milk to the point where latte art becomes achievable and repeatable. Choosing the right range means the color windows fall where you actually need them, rather than bunching at one end of the scale.\u003c\/p\u003e\n\n\u003ch2\u003eMoisture-Resistant and Simple to Apply\u003c\/h2\u003e\n\u003cp\u003eEach strip has a self-adhesive backing rated moisture resistant, with an estimated adhesive shelf life of two years (actual life varies with application and use). Before applying, the surface should be clean and dry; during application, the strip should lie flat with no gaps or air pockets where water could seep behind it. Once in place, the strip stays put through normal use without tools or recalibration.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Heat range:\u003c\/strong\u003e 158–212°F \/ 70–100°C, sized for brew head preheating\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow Heat range:\u003c\/strong\u003e 77–149°F \/ 25–65°C, sized for milk steaming and frothing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree-color display:\u003c\/strong\u003e tan (above), green (actual), blue (below) for instant reading\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelf-adhesive backing:\u003c\/strong\u003e moisture resistant, estimated two-year adhesive shelf life\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact footprint:\u003c\/strong\u003e 2.25 x 0.5 inches, fits cylinders and flat surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eHigh Heat – Brew Heads\u003c\/th\u003e\n      \u003cth\u003eLow Heat – Steamers \u0026amp; Frothers\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTemperature Range\u003c\/td\u003e\n      \u003ctd\u003e158–212°F \/ 70–100°C\u003c\/td\u003e\n      \u003ctd\u003e77–149°F \/ 25–65°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e2.25 x 0.5 in\u003c\/td\u003e\n      \u003ctd\u003e2.25 x 0.5 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBacking\u003c\/td\u003e\n      \u003ctd\u003eSelf-adhesive, moisture resistant\u003c\/td\u003e\n      \u003ctd\u003eSelf-adhesive, moisture resistant\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAdhesive Shelf Life\u003c\/td\u003e\n      \u003ctd\u003eEst. 2 years (varies with use)\u003c\/td\u003e\n      \u003ctd\u003eEst. 2 years (varies with use)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity per Pack\u003c\/td\u003e\n      \u003ctd\u003e1 strip\u003c\/td\u003e\n      \u003ctd\u003e1 strip\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese strips suit anyone using a manual lever espresso maker or a stovetop or electric milk steamer who wants a simple, permanent-mount way to confirm surface temperature without picking up a separate probe thermometer each time. They are a practical addition to any Flair espresso setup where brew head preheating or milk temperature consistency matters.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese strips are not a substitute for a calibrated probe or digital thermometer where precise numeric accuracy is required. Each pack contains one strip; buyers needing strips for both a brew head and a steamer should select one of each variant. The strips are not rated for immersion in liquid.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the High Heat and Low Heat strips?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe High Heat Flair Temperature Strip reads 158–212°F (70–100°C) and is intended for monitoring brew head surface temperature before adding espresso water. The Low Heat strip reads 77–149°F (25–65°C) and is sized for the lower temperature range used when steaming or frothing milk. Selecting the range that matches your use case keeps the color windows centered where you need them.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I read the color display on a Flair Temperature Strip?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAs the Flair Temperature Strip warms, its windows shift color. The green window indicates the actual surface temperature at that moment. A tan or reddish-brown window sits above the current temperature, and a blue window falls below it. Reading the green window gives you the current reading without any math or interpolation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I apply the strip so it stays in place?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBefore applying a Flair Temperature Strip, clean and dry the surface completely. Press the strip flat against the cylinder or surface so no gaps or air pockets form between the adhesive and the surface; trapped air or moisture can cause the strip to lift or allow water to seep behind it. The self-adhesive backing is moisture resistant once properly seated.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow long does the adhesive last?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eFlair rates the adhesive shelf life at approximately two years, though actual longevity varies depending on the surface, frequency of use, and exposure to moisture or heat. The strip is not designed for removal and reapplication; plan the placement before pressing it down.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"High Heat – Brew Heads","offer_id":68416963313885,"sku":"FLR-6X210141N","price":4.5,"currency_code":"USD","in_stock":true},{"title":"Low Heat – Steamers \u0026 Frothers","offer_id":68416963346653,"sku":"FLR-6X210110N","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-temperature-strip-pro-cylinder-opacity-square.jpg?v=1793763070","url":"https:\/\/coffeeroastco.com\/es\/products\/flair-espresso-temperature-strips","provider":"CoffeeRoast Co.","version":"1.0","type":"link"}