{"product_id":"flair-58-etched-puck-screen","title":"Flair 58 Etched Puck Screen","description":"\u003cp class=\"product-lead\"\u003eThe Flair 58 Etched Puck Screen is a replacement puck screen for the Flair 58 espresso maker, made from magnetic stainless steel 304 with a black PVD coating and a laser-etched Flair 58 logo. Its etched hole pattern improves water distribution across the coffee bed compared to the original sintered mesh screen, and its magnetic construction allows removal with any magnet.\u003c\/p\u003e\n\n\u003ch2\u003eMore Even Water Distribution\u003c\/h2\u003e\n\u003cp\u003eThe etched pattern across the screen's surface softens and spreads the flow of water as it meets the coffee bed, reducing the risk of channeling at the edges of the puck. Where the original sintered mesh screen could direct water unevenly and required a pre-wet step to prevent edge channeling, the etched design addresses that without the extra step. More consistent water delivery across the full 58.55 mm diameter means the grounds are saturated more uniformly, which supports more even extraction shot to shot.\u003c\/p\u003e\n\n\u003ch2\u003eEasier to Clean, Faster to Preheat\u003c\/h2\u003e\n\u003cp\u003eThe etched stainless steel surface does not trap coffee fines the way a sintered mesh does, so rinsing the screen between shots is straightforward. Magnetic stainless steel heats up faster than sintered mesh, which shortens the preheating phase before pulling a shot. Removal requires only a magnet (the articulating shot mirror on the Flair 58 carries one), so the screen comes out without tools.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEtched hole pattern:\u003c\/strong\u003e 0.4 mm hole diameter distributes water evenly across the puck surface\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic stainless steel:\u003c\/strong\u003e removes with any magnet, including the shot mirror magnet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlack PVD coating:\u003c\/strong\u003e applied over stainless steel 304 (Martensitic) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo fines retention:\u003c\/strong\u003e etched surface cleans more easily than sintered mesh\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFaster preheating:\u003c\/strong\u003e material heats up more quickly than traditional sintered mesh\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLaser-etched Flair 58 logo:\u003c\/strong\u003e identifies the screen and confirms correct sizing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDiameter\u003c\/td\u003e\n      \u003ctd\u003e58.55 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHole diameter\u003c\/td\u003e\n      \u003ctd\u003e0.4 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThickness\u003c\/td\u003e\n      \u003ctd\u003e0.5 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless steel 304 (Martensitic)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoating\u003c\/td\u003e\n      \u003ctd\u003eBlack PVD\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis screen suits Flair 58 owners who want more consistent water distribution across the puck, a screen that cleans quickly without retaining fines, and a part that removes without tools between shots or during maintenance.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis screen is sized specifically for the Flair 58 at 58.55 mm and is not compatible with other Flair models. It does not replace the portafilter basket, the brew head, or any other component of the Flair 58 brew group.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this puck screen fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Etched Puck Screen is sized at 58.55 mm in diameter and is designed for the Flair 58 espresso maker. Flair lists it for the Flair 58 only, so buyers with a different Flair machine should confirm sizing before ordering.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow is this screen removed from the brew head?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Etched Puck Screen is made from magnetic stainless steel, so it can be lifted out with any magnet. The articulating shot mirror included with the Flair 58 carries a magnet that works for this purpose, meaning no separate tool is needed.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this screen replace the need for a pre-wet step?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe etched design of the Flair 58 Etched Puck Screen eliminates the need for a pre-wet to prevent edge channeling, which was a step sometimes used with the original sintered mesh screen. The etched hole pattern distributes water more evenly from the start of the shot.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does cleaning compare to the original sintered mesh screen?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Etched Puck Screen does not retain coffee fines the way a sintered mesh screen does. The smooth etched surface rinses more easily, reducing the effort required to keep the screen clean between shots or after a brewing session.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416903151837,"sku":"FLR-35114333N","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-flair-58-etched-screen-3-small.jpg?v=1793761518","url":"https:\/\/coffeeroastco.com\/es\/products\/flair-58-etched-puck-screen","provider":"CoffeeRoast Co.","version":"1.0","type":"link"}