{"title":"Flair Espresso","description":null,"products":[{"product_id":"flair-49-pro-manual-lever-espresso-machine","title":"Flair 49 PRO 49mm Manual Lever Espresso Machine","description":"\u003cp class=\"product-lead\"\u003eThe Flair 49 PRO is a fully manual, pump-free lever espresso machine with a 49mm portafilter, an all-stainless-steel brew path, and zero electronics. Weighing 7 lbs and measuring 13.5 x 7.5 x 11 inches assembled, it is designed for home baristas who want hands-on extraction control. It ships with both a pressurized basket for beginners and a bottomless basket for advanced brewers.\u003c\/p\u003e\n\n\u003ch2\u003ePull Shots With Real Pressure Control\u003c\/h2\u003e\n\u003cp\u003eThe Flair 49 PRO's elongated lever and T-grip handle let you apply 6–9 BAR of pressure manually, and an integrated pressure gauge mounted directly on the machine shows you exactly where you are during extraction. That real-time feedback lets you hold pressure steady, ramp it up, or taper off at the end of a shot: adjustments that a pump machine makes automatically and invisibly. Over time, that tactile loop builds an intuition for extraction that translates directly into more consistent, more intentional espresso.\u003c\/p\u003e\n\n\u003ch2\u003eA Brew Path With No Plastic\u003c\/h2\u003e\n\u003cp\u003eThe Flair 49 PRO's cylinder, plunger, and locking hook are all stainless steel, so no plastic contacts your water or coffee at any point during brewing. Beyond purity, the stainless steel cylinder wall is optimized in thickness to heat quickly from a hot-water pour and hold that temperature through the shot. The hollow stainless steel plunger design further improves thermal efficiency, so the brew head stays in the right temperature window without a separate preheating routine.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Baskets, One Machine, Any Skill Level\u003c\/h2\u003e\n\u003cp\u003eThe included pressurized basket tolerates a wider range of grind sizes and works with any grinder, making it a genuine starting point for someone new to espresso. The included bottomless basket opens up the full 12–20 g dose range and gives experienced brewers unobstructed visibility of the extraction. Channeling shows immediately, and the feedback loop tightens. The 49mm basket format itself contributes here: the deeper, narrower puck geometry reduces channeling risk and produces espresso with more body and mouthfeel compared to wider-format baskets at equivalent doses.\u003c\/p\u003e\n\n\u003ch2\u003eNo Disassembly Between Shots\u003c\/h2\u003e\n\u003cp\u003eThe Flair 49 PRO uses a fixed cylinder and piston system with a stainless steel valve plunger and locking hook, so the brew head does not need to be removed and reassembled between shots. That simplifies the workflow considerably for anyone pulling multiple drinks in a session and removes one of the friction points common to earlier manual lever designs.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e49mm portafilter with redwood handle:\u003c\/strong\u003e classic basket format with a 12–20 g dose range and a hardwood handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAll-stainless-steel brew path:\u003c\/strong\u003e cylinder, plunger, and locking hook contain no plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated pressure gauge:\u003c\/strong\u003e reads live extraction pressure; supports 6–9 BAR shots\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo included baskets:\u003c\/strong\u003e pressurized (beginner-friendly) and bottomless (precision brewing)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFixed cylinder, no disassembly between shots:\u003c\/strong\u003e valve plunger with locking hook keeps workflow fast\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact footprint:\u003c\/strong\u003e 13.5 x 7.5 x 11 inches assembled; no electricity required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e7 lbs (3.2 kg)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAssembled Dimensions\u003c\/td\u003e\n      \u003ctd\u003e13.5 x 7.5 x 11 in (34.3 x 19.05 x 27.94 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePortafilter Size\u003c\/td\u003e\n      \u003ctd\u003e49mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDose Range\u003c\/td\u003e\n      \u003ctd\u003e12–20 g\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWater Capacity\u003c\/td\u003e\n      \u003ctd\u003e90 ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eYield\u003c\/td\u003e\n      \u003ctd\u003eUp to 55 ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrew Pressure\u003c\/td\u003e\n      \u003ctd\u003e6–9 BAR (lever-applied, gauge-monitored)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrew Path Material\u003c\/td\u003e\n      \u003ctd\u003eStainless steel (no plastic)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower\u003c\/td\u003e\n      \u003ctd\u003eNone; fully manual\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded Accessories\u003c\/td\u003e\n      \u003ctd\u003eBase, post and lever with brew head, redwood 49mm portafilter, pressurized basket, bottomless basket, stainless steel palm tamper, dosing funnel, pressure gauge, drip tray, puck screen, valve plunger with locking hook, brewing guide, bolt and hex wrench\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair 49 PRO suits home baristas at any experience level who want a hands-on, manual espresso workflow without electricity. Beginners can start immediately with the pressurized basket and any grinder; experienced brewers can move to the bottomless basket and a quality burr grinder for precision extraction. The compact 13.5 x 7.5 inch footprint fits most kitchen counters.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair 49 PRO is not suited to high-volume or commercial settings. The 90 ml water capacity and manual lever operation are designed for single or double shots per cycle, not back-to-back service volume. It requires no electricity but does require hot water from an external source such as a kettle; it has no built-in boiler or heating element.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Flair 49 PRO require electricity?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 49 PRO is a fully manual lever espresso machine with zero electronics. It requires no electricity to operate. Brewing requires hot water from an external source, such as a kettle, and pressure is applied entirely by hand through the lever.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat grinder do I need to use the Flair 49 PRO?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 49 PRO ships with two baskets. The pressurized basket works with pre-ground coffee or any grinder, so no specialty equipment is required to get started. The bottomless basket requires an espresso-capable burr grinder with stepless grind adjustment for best results.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the box with the Flair 49 PRO?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 49 PRO ships with the base, post and lever with brew head attached, a redwood 49mm portafilter, a pressurized basket, a bottomless basket, a stainless steel palm tamper, a dosing funnel, a pressure gauge, a drip tray, a puck screen, a valve plunger with locking hook, a brewing guide, and a bolt and hex wrench.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow much coffee does the Flair 49 PRO use per shot?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 49 PRO supports a dose range of 12–20 grams of ground coffee per shot, with a water capacity of 90 ml and a yield of up to 55 ml. The 49mm basket format is particularly well-suited to lower doses in the 12–14 g range.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I pull multiple shots in a row without disassembling the Flair 49 PRO?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair 49 PRO uses a fixed cylinder and piston system with a stainless steel valve plunger and locking hook, so the brew head does not need to be removed between shots. This design allows multiple espresso shots to be pulled in sequence without a full disassembly step.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat pressure does the Flair 49 PRO brew at?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 49 PRO brews at 6–9 BAR of pressure, applied manually through the lever. An integrated pressure gauge displays live extraction pressure during the shot, allowing the brewer to monitor and adjust pressure throughout extraction.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416667975901,"sku":"FLR-04119598B","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/flair_49_pro__shopify_white_sized.jpg?v=1793758592"},{"product_id":"flair-power-tower-electric-grinder-motor-base","title":"Flair Power Tower Electric Grinder Motor Base","description":"\u003cp class=\"product-lead\"\u003eThe Flair Power Tower is an electric motor base that converts a compatible hand grinder into a 2-in-1 manual and electric grinding setup, supporting doses up to 30 grams and grind ranges from espresso to French press. It is designed for the Flair Royal Grinder and is also compatible with select 1Zpresso grinders via an adapter kit. Three configurations are available: base unit only, bundled with the Royal Grinder, or bundled with the 1Zpresso Adapter Kit.\u003c\/p\u003e\n\n\u003ch2\u003eGrind by Hand or by Motor, on Your Terms\u003c\/h2\u003e\n\u003cp\u003eThe Power Tower attaches to a compatible hand grinder and drives it electrically through a stainless steel hex drive shaft, so switching between manual and electric grinding takes only seconds. For days when you want the tactile control of hand grinding, the grinder detaches and works exactly as it always did. For mornings when you want a faster, more consistent result without the effort, the Power Tower takes over. That flexibility means you are not buying a dedicated electric grinder and a separate hand grinder: one grinder covers both modes.\u003c\/p\u003e\n\n\u003ch2\u003eOne Hour of Untethered Grinding\u003c\/h2\u003e\n\u003cp\u003eAn internal lithium-ion rechargeable battery provides one full hour of unplugged electric grinding on a single charge. A battery indicator light on the plug shows charge status, so there is no guessing when the Power Tower is ready. The cordless runtime makes it practical away from a wall outlet, whether at a brew bar, outdoors, or traveling, without giving up the electric workflow you rely on at home.\u003c\/p\u003e\n\n\u003ch2\u003eConsistent Torque Across Any Roast Level\u003c\/h2\u003e\n\u003cp\u003eThe Power Tower is designed to deliver consistent torque regardless of bean density or roast level, cutting through light and dark roasts without bogging down. When paired with the Royal Grinder, the combination offers 72 individual grind adjustments at 0.02 mm increments, covering the full range from fine espresso to coarse French press. That range and consistency matter most to grinders who dial in frequently or brew across multiple methods, and the motor does not introduce the torque variation that hand fatigue can cause over a long grind session.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-in-1 manual and electric operation:\u003c\/strong\u003e attaches to a compatible hand grinder for electric drive; detaches for standard hand grinding in seconds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInternal lithium-ion battery:\u003c\/strong\u003e provides one hour of unplugged electric grinding per charge, with a battery indicator light on the plug\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal voltage:\u003c\/strong\u003e 110–220V input supports use in North America and internationally\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30 g max dose capacity:\u003c\/strong\u003e suited to single and double espresso doses and most pour-over batch sizes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoyal Grinder compatibility:\u003c\/strong\u003e designed and optimized for the Flair Royal Grinder; 72-step, 0.02 mm adjustment range when paired with Royal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1Zpresso compatibility via adapter:\u003c\/strong\u003e works with select J Series, K Series, and Z Series 1Zpresso grinders using a 6 mm squared hex drive shaft (adapter kit required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAssembled Dimensions\u003c\/td\u003e\n      \u003ctd\u003e9\" L x 3.75\" W x 11\" H (23 cm x 9.5 cm x 28 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight (with Royal Grinder)\u003c\/td\u003e\n      \u003ctd\u003e7 lb (3.2 kg)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax Dose\u003c\/td\u003e\n      \u003ctd\u003e30 g\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVoltage\u003c\/td\u003e\n      \u003ctd\u003e110–220V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBattery\u003c\/td\u003e\n      \u003ctd\u003eLithium-ion rechargeable; 1 hour unplugged runtime\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDrive Shaft\u003c\/td\u003e\n      \u003ctd\u003eStainless steel, 6 mm squared hex\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWhat's Included (all configurations)\u003c\/td\u003e\n      \u003ctd\u003ePower Tower body, stainless steel drive shaft, funnel, grounds tray, catch cup, plug with battery indicator light, RDT bottle, manual\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAlso Included (With Royal Grinder)\u003c\/td\u003e\n      \u003ctd\u003eRoyal Grinder\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAlso Included (With 1Zpresso Adapter)\u003c\/td\u003e\n      \u003ctd\u003eExtended drive shaft, silicone wrap, manual\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible 1Zpresso Models\u003c\/td\u003e\n      \u003ctd\u003eJ Series: J, JX, J-Max (6 mm hex), JX-PRO, J-PRO, JE, JE-Plus, J-Ultra, S Models; K Series: K-Pro, K-Max, K-Ultra, K-Plus; Z Series: ZP6 Special\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Tower suits home baristas and travelers who already own or plan to buy a Flair Royal Grinder or a compatible 1Zpresso grinder and want the option to drive it electrically without replacing it. It is well matched to single or double espresso doses and any brew method within the Royal Grinder's 72-step range, and its battery runtime makes it practical for use away from a power outlet.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Power Tower requires a compatible grinder to function and does not grind on its own. It is not compatible with grinders that use a rounded (non-squared) 6 mm hex shaft, including some legacy 1Zpresso models. The 30 g max dose makes it unsuitable for high-volume or commercial grinding workflows.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Power Tower come with a grinder, or do I need to supply one?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tower is available in three configurations: the base unit only (no grinder included), bundled with the Flair Royal Grinder, or bundled with the 1Zpresso Adapter Kit for use with a compatible 1Zpresso grinder you already own. A compatible grinder is required; the base unit alone does not grind coffee.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich 1Zpresso grinders work with the Power Tower?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tower is compatible with 1Zpresso grinders that use a 6 mm squared hex drive shaft. Compatible models include the J Series (J, JX, J-Max with 6 mm hex, JX-PRO, J-PRO, JE, JE-Plus, J-Ultra, and S Models), K Series (K-Pro, K-Max, K-Ultra, K-Plus), and Z Series (ZP6 Special). Some older 1Zpresso grinders have a rounded hex shaft and are not compatible.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow long does the battery last, and how do I know when it is charged?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tower's internal lithium-ion battery provides one hour of unplugged electric grinding per full charge. The plug includes a battery indicator light that shows charge status; a green light indicates the Power Tower is ready to use without a wall connection.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I still grind by hand when the Power Tower is attached?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Power Tower is designed as a 2-in-1 setup: the compatible grinder can be detached from the Power Tower in seconds and used as a standard hand grinder. No tools or reconfiguration are required to switch between electric and manual modes.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat grind range does the Power Tower support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eGrind size is set by the grinder attached to the Power Tower, not by the Power Tower itself. When paired with the Flair Royal Grinder, the combination covers 72 individual grind steps at 0.02 mm increments, spanning from fine espresso to coarse French press. The Power Tower delivers consistent torque across light and dark roast bean densities.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the maximum dose the Power Tower handles?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tower supports a maximum dose of 30 grams of coffee per grind session. This covers single and double espresso doses as well as most pour-over and batch brew quantities, but the 30 g ceiling makes it unsuitable for high-volume or commercial grinding.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"No Grinder","offer_id":68416673120477,"sku":"FLR-0T241223B","price":149.0,"currency_code":"USD","in_stock":true},{"title":"With Royal Grinder","offer_id":68416673153245,"sku":"FLR-0T241247B","price":268.0,"currency_code":"USD","in_stock":true},{"title":"With 1Zpresso Adapter","offer_id":68416673186013,"sku":"FLR-0T118164B","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/power_tower_hero_woo_83ba1bd4-9994-4666-ae6d-735f8058e8f4.jpg?v=1793758708"},{"product_id":"flair-58-puck-screen","title":"Flair 58 Puck Screen","description":"\u003cp class=\"product-lead\"\u003eThe Flair 58 Puck Screen is a 58.5mm stainless steel mesh screen designed for the Flair 58 espresso maker, placed on top of the coffee puck to distribute water evenly across the coffee bed and reduce channeling during extraction.\u003c\/p\u003e\n\n\u003ch2\u003eMore Even Extraction, Shot After Shot\u003c\/h2\u003e\n\u003cp\u003eThe Flair 58 Puck Screen softens and evens out the delivery of water to the coffee bed as the lever is pressed. Uneven water distribution is one of the most common causes of channeling, where water finds a path of least resistance through the puck rather than saturating it uniformly. By spreading water across the full 58.5mm surface, the puck screen supports a more balanced, consistent extraction from the Flair 58 brew head.\u003c\/p\u003e\n\n\u003ch2\u003eLess Cleaning, More Brewing\u003c\/h2\u003e\n\u003cp\u003eWhen the lever is lifted after a shot, coffee material can be drawn up into the brew head, requiring regular disassembly and cleaning. The Flair 58 Puck Screen sits between the puck and the brew head, trapping that material within its mesh layers. The result is a brew head that stays cleaner between sessions, with removal and cleaning needed as infrequently as once a month or less. Rinsing the screen itself under the tap clears the trapped grounds quickly.\u003c\/p\u003e\n\n\u003ch2\u003ePlacement and Preheat Timing\u003c\/h2\u003e\n\u003cp\u003eBecause the Flair 58 Puck Screen has meaningful thermal mass, placing it in the portafilter cold and then locking in the portafilter just before switching on the preheat controller allows the screen to come up to temperature alongside the brew head. Inserting it after the brew head is already hot can introduce a cold surface into the thermal path and affect shot temperature consistency.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEven water distribution:\u003c\/strong\u003e mesh surface softens and spreads water delivery across the full coffee bed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChanneling reduction:\u003c\/strong\u003e more uniform saturation of the puck during the lever press\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduced brew head soiling:\u003c\/strong\u003e traps coffee material that would otherwise be pulled into the brew head on lever lift\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to clean:\u003c\/strong\u003e mesh flushes clear under a tap; no disassembly required for routine cleaning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlair 58 branded:\u003c\/strong\u003e screen carries the Flair 58 logo\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDiameter\u003c\/td\u003e\n      \u003ctd\u003e58.5mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSUS 304 solid multi-layers mesh stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible machine\u003c\/td\u003e\n      \u003ctd\u003eFlair 58\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair 58 Puck Screen suits Flair 58 owners who want more consistent extractions and a lower-maintenance brew head. It is a straightforward addition to any Flair 58 workflow, particularly for those who pull multiple shots in a session and want to extend the interval between brew head cleanings.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis screen is sized specifically for the Flair 58 at 58.5mm and is not compatible with other Flair models. It does not replace the portafilter basket or any other brew head component.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this puck screen fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Puck Screen is sized at 58.5mm and is designed for the Flair 58 espresso maker. It is not listed as compatible with other Flair models such as the PRO 2, PRO 3, 49 PRO, NEO, Classic, or 2GO.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhere does the puck screen sit in the brew head assembly?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Puck Screen is placed on top of the coffee puck inside the portafilter, between the puck surface and the brew head. It is not inserted into the brew head itself.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhen should the puck screen be placed in the portafilter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBecause the Flair 58 Puck Screen has thermal mass, it should be placed in the portafilter and locked in just before the preheat controller is switched on, so the screen heats up alongside the brew head rather than introducing a cold surface mid-preheat.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow is the puck screen cleaned?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Puck Screen can be flushed clean under a tap. The multi-layer mesh traps spent coffee grounds that would otherwise enter the brew head, and rinsing the screen clears those grounds without disassembly. Brew head removal may only be needed once a month or less when the screen is used consistently.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416675381469,"sku":"FLR-35210318N","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-flair-58-puck-screen.jpg?v=1793758775"},{"product_id":"flair-58-plus-2-manual-lever-espresso-machine","title":"Flair 58 Plus 2 Manual Lever Espresso Machine","description":"\u003cp class=\"product-lead\"\u003eThe Flair 58 Plus 2 is a manual direct-lever espresso machine with a 58mm portafilter system, an all-stainless-steel brew path, and an integrated preheat controller with three temperature settings. Designed for home baristas who want full, hands-on control over every brewing variable, it brews a standard dose of 16–20g with a 90ml water reservoir and yields up to 55ml per shot. It is available as a standalone unit or with a lockable hard travel case.\u003c\/p\u003e\n\n\u003ch2\u003eFull Control Over Every Brew Variable\u003c\/h2\u003e\n\u003cp\u003eThe Flair 58 Plus 2 is a direct-lever machine, meaning you apply pressure through the lever rather than relying on a pump. A built-in pressure gauge shows you exactly what is happening as you pull, so you can adjust mid-shot rather than guessing after the fact. That real-time feedback is what separates a lever machine from most home espresso equipment: the shot is yours to shape, from the first drop to the last. Brew ratios from 1:1 to 3:1 and beyond are all within reach using the three included baskets (high dose, low dose, and pressurized).\u003c\/p\u003e\n\n\u003ch2\u003eThermal Management Built Into the Base\u003c\/h2\u003e\n\u003cp\u003eConsistent extraction temperature is one of the hardest variables to control on a manual machine, and the Flair 58 Plus 2 addresses it directly. The preheat controller is integrated into the base and offers three settings: 85°C, 90°C, and 95°C, corresponding roughly to dark, medium, and light roasts. Dialing in the right thermal input for a given coffee means fewer sour or bitter shots and more repeatable results across bags and roast levels. The machine unplugs from the power supply entirely, so it can also be used without wires when the brew head is already up to temperature.\u003c\/p\u003e\n\n\u003ch2\u003eA Brew Path With No Plastics\u003c\/h2\u003e\n\u003cp\u003eEvery surface the espresso contacts on the Flair 58 Plus 2 is stainless steel, from the brew head through to the cup. No plastic touches the brew water or the shot at any point in the process. That all-stainless construction also means the 58mm portafilter system is compatible with a wide range of third-party accessories built around the industry-standard basket diameter.\u003c\/p\u003e\n\n\u003ch2\u003eCompact Footprint, Full-Size Workflow\u003c\/h2\u003e\n\u003cp\u003eThe Flair 58 Plus 2 base measures 7.5 inches wide by 13 inches deep, and the machine stands 11 inches tall with the lever lowered, a footprint roughly 40% smaller than a standard semi-automatic machine. The articulating shot mirror mounts magnetically and lets you watch the extraction from below without repositioning your cup. A valve plunger with a locking hook manages pre-infusion and flow, and the drip tray and puck screen keep the workflow clean between shots.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated preheat controller:\u003c\/strong\u003e three settings (85°C \/ 90°C \/ 95°C) built into the base for thermal management across roast levels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAll-stainless brew path:\u003c\/strong\u003e no plastic contacts the espresso from kettle to cup\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e58mm portafilter system:\u003c\/strong\u003e industry-standard diameter; includes high-dose, low-dose, and pressurized baskets for 16–20g doses\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt-in pressure gauge:\u003c\/strong\u003e real-time feedback during the pull for shot-by-shot adjustment\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic articulating shot mirror:\u003c\/strong\u003e monitors extraction from below without moving the cup\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetachable power supply:\u003c\/strong\u003e unplugs for wire-free brewing once the brew head is preheated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eFlair 58 Plus 2\u003c\/th\u003e\n      \u003cth\u003eFlair 58 Plus 2 with Travel Case\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e12 lb\u003c\/td\u003e\n      \u003ctd\u003e14 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e17.5 x 13 x 6.5 in\u003c\/td\u003e\n      \u003ctd\u003e17.5 x 13 x 6.5 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFootprint (base)\u003c\/td\u003e\n      \u003ctd\u003e7.5 in wide x 13 in deep\u003c\/td\u003e\n      \u003ctd\u003e7.5 in wide x 13 in deep\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHeight (lever lowered)\u003c\/td\u003e\n      \u003ctd\u003e11 in\u003c\/td\u003e\n      \u003ctd\u003e11 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePortafilter diameter\u003c\/td\u003e\n      \u003ctd\u003e58mm\u003c\/td\u003e\n      \u003ctd\u003e58mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDose range\u003c\/td\u003e\n      \u003ctd\u003e16–20g\u003c\/td\u003e\n      \u003ctd\u003e16–20g\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWater capacity\u003c\/td\u003e\n      \u003ctd\u003e90ml\u003c\/td\u003e\n      \u003ctd\u003e90ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax yield\u003c\/td\u003e\n      \u003ctd\u003eUp to 55ml\u003c\/td\u003e\n      \u003ctd\u003eUp to 55ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePreheat settings\u003c\/td\u003e\n      \u003ctd\u003e85°C \/ 90°C \/ 95°C\u003c\/td\u003e\n      \u003ctd\u003e85°C \/ 90°C \/ 95°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrew path material\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePortafilter material\u003c\/td\u003e\n      \u003ctd\u003eWalnut\u003c\/td\u003e\n      \u003ctd\u003eWalnut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded baskets\u003c\/td\u003e\n      \u003ctd\u003eHigh dose, low dose, pressurized\u003c\/td\u003e\n      \u003ctd\u003eHigh dose, low dose, pressurized\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTravel case\u003c\/td\u003e\n      \u003ctd\u003eNot included\u003c\/td\u003e\n      \u003ctd\u003eLockable, watertight hard case with custom foam\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded accessories\u003c\/td\u003e\n      \u003ctd\u003eBase with preheat controller, lever assembly with brew head, walnut portafilter, walnut palm tamper, pressure gauge, articulating shot mirror, drip tray, puck screen, valve plunger with locking hook, power supply, wire guide, post screws and allen key, brewing guide\u003c\/td\u003e\n      \u003ctd\u003eAll of the above, plus lockable watertight hard travel case with custom foam\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair 58 Plus 2 suits home baristas who want hands-on control over pressure, ratio, and temperature in a compact countertop machine. The pressurized basket makes it accessible to those new to espresso, while the direct-lever system and real-time pressure gauge give experienced brewers the feedback they need to dial in complex recipes. It works equally well for single-origin filter-style shots and traditional espresso ratios.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair 58 Plus 2 is not suited to high-volume or commercial use. The 90ml water reservoir and manual lever mean it is designed for one or two shots at a time, not continuous service. It does not include a grinder, kettle, or milk steamer; an espresso-capable burr grinder and a kettle are required for brewing. It is not an automatic or semi-automatic machine and has no internal pump.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow much counter space does the Flair 58 Plus 2 require?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plus 2 base measures 7.5 inches wide by 13 inches deep, and the machine stands 11 inches tall with the lever in the lowered position. That footprint is approximately 40% smaller than a standard semi-automatic espresso machine, making the Flair 58 Plus 2 workable in kitchens where a full-size machine would not fit.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat temperature settings does the preheat controller offer?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe integrated preheat controller on the Flair 58 Plus 2 has three settings: 85°C (185°F), 90°C (194°F), and 95°C (203°F). These correspond roughly to dark, medium, and light roasts respectively. The controller is built into the base, and the machine unplugs from its power supply so it can be used without wires once the brew head has reached temperature.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat dose and brew ratios does the Flair 58 Plus 2 support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plus 2 uses a standard dose of 16–20g, a 90ml water reservoir, and yields up to 55ml per shot. The three included baskets (high dose, low dose, and pressurized) support brew ratios from 1:1 and 2:1 through to 3:1 and beyond, covering traditional ristretto through lungo-style recipes.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the Flair 58 Plus 2 suitable for someone new to espresso?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair 58 Plus 2 includes a pressurized basket that is more forgiving of grind inconsistency, which lowers the barrier for beginners. The built-in pressure gauge and three-setting preheat controller also give newer brewers clear, readable feedback as they learn. The direct-lever workflow does involve a learning curve, but the machine is designed to be approachable as well as capable.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow long does it take to brew a shot?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA shot on the Flair 58 Plus 2 can be ready in under three minutes, including preheating the brew cylinder, preparing the puck, and heating water. The actual lever pull takes roughly the same time as on any espresso machine; the manual steps of dosing, tamping, and preheating account for most of the total time.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the Flair 58 Plus 2 be used to make milk drinks and latte art?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plus 2 does not include a steam wand or milk steamer. It can be paired with a separate milk steamer for lattes, cappuccinos, or latte art; two options that fit this workflow are the Wizard stovetop steamer and the eWizard electric steamer, each sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat accessories are required that are not included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plus 2 requires an espresso-capable burr grinder and a kettle, neither of which is included. A digital scale is also strongly recommended for repeatable dosing and yield measurement. The machine includes baskets, a tamper, pressure gauge, puck screen, drip tray, and power supply, but does not include any grinding or water-heating equipment.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow is the Flair 58 Plus 2 cleaned?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plus 2 requires minimal cleaning and no descaling. Routine maintenance involves wiping down the machine and flushing the brew head with clean water. Because the brew path is all stainless steel with no internal boiler or pump, there are no internal components that accumulate scale in normal use.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Flair 58 Plus 2","offer_id":68416687702237,"sku":"FLR-05116559B","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Flair 58 Plus 2 with Travel Case","offer_id":68416687735005,"sku":"FLR-05116566B","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/flair_58_plus2_product_shot_front_shopify-sq.jpg?v=1793758977"},{"product_id":"flair-2go-portable-manual-lever-espresso-maker","title":"Flair 2GO Portable Manual Lever Espresso Maker","description":"\u003cp class=\"product-lead\"\u003eThe Flair 2GO is a manual lever espresso maker designed for travel, small kitchens, and anywhere a full-size machine won't go. Its collapsible frame folds to 3.5 x 7 x 3.25 inches and packs into a custom molded carrying case measuring 9.5 x 5.25 x 4 inches, with a total in-case weight of 3.7 lbs. Available in Black and Forest Green.\u003c\/p\u003e\n\n\u003ch2\u003ePull a Real Shot Anywhere\u003c\/h2\u003e\n\u003cp\u003eThe Flair 2GO uses a direct lever mechanism, not a pump, to generate 6–9 BAR of extraction pressure: the range required for genuine espresso. An included pressure gauge mounts to the piston so you can watch and adjust pressure in real time as you pull, giving you the same feedback loop a skilled barista relies on. That level of control is rare in any portable brewer and essentially absent from pump-driven travel devices.\u003c\/p\u003e\n\n\u003ch2\u003eNo Preheating, No Power Required\u003c\/h2\u003e\n\u003cp\u003eThe 2GO's thin-walled cylinder with silicone sleeve is engineered to brew without a preheat step, which removes one of the main friction points of manual espresso on the road. Pour your hot water directly from a kettle, dose 12–18g of ground coffee into the bottomless 2-in-1 portafilter, and you can have a shot ready in roughly four minutes. No outlet, no battery, no waiting for a machine to warm up.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Repeated Use, Not Just One Trip\u003c\/h2\u003e\n\u003cp\u003eThe 2GO frame is forged from aircraft-grade aluminum, a material choice that keeps weight low while providing structural rigidity well beyond what travel use demands. Cleanup is straightforward: separate the brew head, cylinder, portafilter, and piston, rinse with tap water, and fold the frame away. No soap is needed for routine cleaning, and no parts are dishwasher-safe, so the maintenance habit stays simple.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect lever, 6–9 BAR:\u003c\/strong\u003e manual pressure control with an included gauge; no pump, no electricity\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo-preheat thin-walled cylinder:\u003c\/strong\u003e silicone-sleeved cylinder brews from hot water without a warm-up step\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully collapsible frame:\u003c\/strong\u003e folds to 3.5 x 7 x 3.25 in; packs into a custom molded carrying case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBottomless 2-in-1 portafilter (40mm):\u003c\/strong\u003e accepts 12–18g doses; yields up to 45ml per shot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete kit in the box:\u003c\/strong\u003e frame, cylinder, portafilter, pressure gauge and piston, tamper, dispersion screen, dosing funnel, and carrying case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight (in case)\u003c\/td\u003e\n      \u003ctd\u003e3.7 lbs (1.67 kg)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCase dimensions\u003c\/td\u003e\n      \u003ctd\u003e9.5 x 5.25 x 4 in (253 x 135 x 104 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFrame dimensions (unfolded)\u003c\/td\u003e\n      \u003ctd\u003e12 x 5 x 10.5 in (305 x 125 x 262 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFrame dimensions (folded)\u003c\/td\u003e\n      \u003ctd\u003e3.5 x 7 x 3.25 in (89 x 178 x 83 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDose range\u003c\/td\u003e\n      \u003ctd\u003e12–18 g\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWater capacity\u003c\/td\u003e\n      \u003ctd\u003e60 ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eYield\u003c\/td\u003e\n      \u003ctd\u003eUp to 45 ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePortafilter basket diameter\u003c\/td\u003e\n      \u003ctd\u003e40 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrew pressure range\u003c\/td\u003e\n      \u003ctd\u003e6–9 BAR\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower required\u003c\/td\u003e\n      \u003ctd\u003eNone\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded accessories\u003c\/td\u003e\n      \u003ctd\u003eFlair 2GO frame, thin-walled no-preheat cylinder with silicone sleeve, bottomless 2-in-1 portafilter (40mm), pressure gauge and piston, custom carrying case, stainless steel tamper, stainless steel dispersion screen, dosing funnel\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair 2GO suits espresso drinkers who travel frequently or live in small spaces and want genuine lever-pulled espresso without a permanent machine footprint. It works well for campers, hotel stays, office use, and anyone comfortable with a short hands-on brewing routine (dose, tamp, pour, pull) and willing to supply their own kettle and grinder.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair 2GO is not suited to milk-drink workflows on its own: it produces espresso only and does not include a steamer. It is also not suited to buyers who want a fully automated or push-button experience, as the lever, tamping, and water pouring are all manual steps. The 40mm portafilter and 60ml water capacity are sized for single or double shots, not back-to-back high-volume service.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow small does the Flair 2GO pack down, and will it fit in a carry-on?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 2GO frame folds to 3.5 x 7 x 3.25 inches and fits inside its custom molded carrying case, which measures 9.5 x 5.25 x 4 inches and weighs 3.7 lbs with all components packed. That case fits inside most backpacks, duffel bags, and carry-on luggage.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Flair 2GO need electricity or batteries?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 2GO requires no electricity or batteries. Pressure is generated entirely by hand through the direct lever, so the only external requirement is hot water from a kettle or any other heat source.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I need to preheat the Flair 2GO before brewing?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair 2GO's thin-walled cylinder is designed to brew without a preheat step. Preheating with boiling water is optional if you prefer, but the 2GO is specifically built to skip that step and simplify travel brewing.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat dose and yield does the Flair 2GO support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 2GO accepts 12–18 grams of ground coffee in its 40mm bottomless portafilter, uses 60ml of water, and yields up to 45ml of espresso per shot, enough for a standard single or double shot.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I control extraction pressure on the Flair 2GO?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 2GO includes a pressure gauge that mounts to the piston assembly. As you press the lever, the gauge shows live pressure in BAR, letting you adjust your hand pressure to stay in the 6–9 BAR range recommended for espresso extraction.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I make lattes or cappuccinos with the Flair 2GO?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 2GO produces espresso only and does not include a milk steamer. To make milk drinks, it can be paired with a separate steamer: Flair offers the Wizard stovetop steamer and the eWizard electric steamer as compatible options.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow long does it take to brew a shot on the Flair 2GO?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eIncluding grinding, dosing, tamping, heating water, and pulling the shot, the Flair 2GO takes roughly four minutes from start to finish. The machine itself requires no warm-up time, so most of that time is prep.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I clean the Flair 2GO?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAfter brewing, separate the brew head, cylinder, portafilter, and piston and rinse each part with tap water. No soap is needed for routine cleaning. Keep the pressure gauge dry and keep all parts out of the dishwasher, then fold the frame and pack it away.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Black","offer_id":68416694157533,"sku":"FLR-0O120723B","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/flair_2go_black_hero_whitebg.jpg?v=1793759102"},{"product_id":"flair-classic-manual-lever-espresso-maker","title":"Flair Classic Manual Lever Espresso Maker","description":"\u003cp class=\"product-lead\"\u003eThe Flair Classic is a fully manual, human-powered lever espresso maker from Flair Espresso, designed for home baristas who want hands-on control over every shot. It accepts a 12–18g dose, holds 60ml of water, and yields up to 45ml of espresso. The Classic ships with two portafilters (a Flow Control Portafilter for convenience and a Bottomless 2-in-1 Portafilter for full extraction control) plus an integrated pressure gauge, all in a 5 lb all-metal frame.\u003c\/p\u003e\n\n\u003ch2\u003ePull Every Shot by Hand\u003c\/h2\u003e\n\u003cp\u003eThe Flair Classic uses a direct lever mechanism: you apply pressure yourself while watching the built-in pressure gauge, rather than relying on a pump. That gauge lets you see exactly what is happening during the pull and adjust your force in real time, giving you a level of feedback that most pump machines simply do not offer. For buyers who want to understand espresso as a craft, not just consume it, that direct connection between hand and cup is the point.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Portafilters, One Machine\u003c\/h2\u003e\n\u003cp\u003eThe Classic includes both the Flow Control Portafilter and the Bottomless 2-in-1 Portafilter. The Flow Control Portafilter works with any grinder or pre-ground coffee, so a first brew is possible without an espresso-capable grinder or any dialing-in. The Bottomless 2-in-1 Portafilter opens up full extraction control once a quality burr grinder is in the setup. Having both in the box means the machine grows with the brewer rather than requiring an immediate upgrade purchase.\u003c\/p\u003e\n\n\u003ch2\u003eSmall Footprint, All-Metal Build\u003c\/h2\u003e\n\u003cp\u003eAssembled, the Flair Classic measures 12.5 inches long by 6.25 inches wide by 10 inches tall, a footprint well under half the counter space of a typical semi-automatic machine. The frame is cast aluminum and stainless steel throughout, with no electronics and no power cord. The brew head detaches completely for rinsing under tap water, with no soap required, keeping maintenance straightforward. The all-metal construction and detachable design are what allow Flair to back the press stand and brewing cylinder with a 3-year limited warranty.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated pressure gauge:\u003c\/strong\u003e monitors extraction pressure in real time so you can target the espresso zone on every pull\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo included portafilters:\u003c\/strong\u003e Flow Control Portafilter (any grinder or pre-ground) and Bottomless 2-in-1 Portafilter (full extraction control with a burr grinder)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully detachable brew head:\u003c\/strong\u003e patented design separates completely for rinsing under tap water, with no soap or descaling cycle needed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAll-metal frame:\u003c\/strong\u003e cast aluminum press stand and stainless steel brewing head with no electronics or power requirements\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional preheat:\u003c\/strong\u003e thin brewing cylinder can be preheated with boiling water using the included preheat cap for a hotter shot or tighter thermal control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e5 lbs (2.27 kg)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAssembled Dimensions\u003c\/td\u003e\n      \u003ctd\u003e12.5\" L x 6.25\" W x 10\" H (32 cm x 16 cm x 25.4 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCase Dimensions\u003c\/td\u003e\n      \u003ctd\u003e12.5\" L x 9\" W x 3.25\" H (32 cm x 23 cm x 8 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDose\u003c\/td\u003e\n      \u003ctd\u003e12–18 g\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInput Water Capacity\u003c\/td\u003e\n      \u003ctd\u003e60 ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eYield\u003c\/td\u003e\n      \u003ctd\u003eUp to 45 ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePortafilter Diameter\u003c\/td\u003e\n      \u003ctd\u003e40 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFrame Materials\u003c\/td\u003e\n      \u003ctd\u003eCast aluminum, stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower\u003c\/td\u003e\n      \u003ctd\u003eNone; fully human-powered\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded Accessories\u003c\/td\u003e\n      \u003ctd\u003eLever Assembly and Base, Bottomless 2-in-1 Portafilter, Flow Control Portafilter, Pressure Gauge and Stem, Stainless Steel Dispersion Screen, Thin Brewing Cylinder, Dosing Cup\/Tamper, Dosing Funnel, Drip Tray, Bolt and Hex Wrench, Brewing Guide\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair Classic suits home baristas at any skill level who want to handcraft espresso shots with direct lever control and real-time pressure feedback. The included Flow Control Portafilter makes it accessible from the very first brew, while the Bottomless 2-in-1 Portafilter rewards more experienced brewers with a quality burr grinder. Its compact 6.25-inch-wide footprint fits kitchens where counter space is limited, and the all-metal build is suited to daily use.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair Classic is not suited to high-volume brewing. The 60ml water reservoir and single-shot workflow make it a one-shot-at-a-time machine, not a solution for serving multiple people in quick succession. It has no pump, no boiler, no steam wand, and no electrical connection; milk steaming requires a separate device such as the Flair Wizard or eWizard. The 40mm portafilter diameter is specific to the Classic and is not interchangeable with standard 58mm portafilter accessories.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow much counter space does the Flair Classic require?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Classic assembles to 12.5 inches long by 6.25 inches wide by 10 inches tall. That footprint is a fraction of a typical semi-automatic espresso machine. When not in use, the Classic can be stored flat in its case, which measures 12.5 inches by 9 inches by 3.25 inches.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I need a specific grinder to use the Flair Classic?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Classic includes two portafilters. The Flow Control Portafilter works with any grinder or pre-ground coffee, so no special grinder is required to start. The Bottomless 2-in-1 Portafilter, which gives full extraction control, requires a high-quality espresso-capable burr grinder for best results.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow is the Flair Classic different from a semi-automatic espresso machine?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA semi-automatic espresso machine uses an electric pump to apply pressure. The Flair Classic is a direct lever machine: the brewer applies pressure manually through the lever while monitoring the integrated pressure gauge. The Flair Classic has no electronics, no power cord, and no pump; it is entirely human-powered.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow long does it take to brew a shot on the Flair Classic?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA shot on the Flair Classic takes approximately four minutes from start to finish, including optionally preheating the brew cylinder, preparing the coffee puck, heating water with a kettle, and pulling the lever. The actual extraction itself takes a similar amount of time to a pump machine.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the Flair Classic make milk-based drinks like lattes?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Classic produces the espresso shot; it has no built-in steam wand or milk-frothing capability. For milk drinks, the Classic can be paired with a separate milk steamer. Flair makes two options for this purpose: the Wizard stovetop steamer and the eWizard electric steamer, both sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I clean the Flair Classic?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Classic brew head detaches completely from the lever assembly. Once removed, the individual parts can be separated and rinsed under cool tap water. No soap is needed. The pressure gauge should be kept dry. There is no descaling cycle and no internal plumbing to maintain.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416699662557,"sku":"FLR-0C119161N","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/flair_classic_shopify_hero.jpg?v=1793759214"},{"product_id":"flair-espresso-royal-manual-burr-grinder","title":"Flair Espresso Royal Manual Burr Grinder","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Royal is a manual conical burr grinder built for espresso-capable precision, featuring Swiss-made hardened tool steel burrs in a 36mm conical geometry and 72 individual adjustment steps of 0.02mm each. The anodized aluminum body weighs 1.5 lbs and is available in black or silver.\u003c\/p\u003e\n\n\u003ch2\u003eGrind Consistency That Shapes the Cup\u003c\/h2\u003e\n\u003cp\u003eThe Royal Grinder's Swiss-made hardened tool steel burrs use a high-efficiency conical geometry designed to produce a consistent particle distribution across the full grind range. For espresso in particular, where small variations in grind size translate directly into over- or under-extraction, that consistency matters more than almost any other variable in the brew process. The Royal's robust drive system keeps the burrs aligned under load, so the grind you dial in on the first shot reproduces on the tenth.\u003c\/p\u003e\n\n\u003ch2\u003e72 Steps of 0.02mm: Dialed Adjustment Across Every Brew Method\u003c\/h2\u003e\n\u003cp\u003eWith 72 individual adjustment steps spaced 0.02mm apart, the Royal Grinder covers the full range from fine espresso to coarse French press without large jumps between settings. The lift, turn, and lock adjustment sleeve holds its position without slipping, so a setting reached after dialing in a shot stays put between uses. Repeatable results mean less wasted coffee during the dial-in process and more confidence when returning to a recipe after switching beans.\u003c\/p\u003e\n\n\u003ch2\u003eAluminum Body, Silicone Grip, Built to Travel\u003c\/h2\u003e\n\u003cp\u003eThe Royal Grinder's body is precision-engineered anodized aluminum, available in black or silver, kept light at 1.5 lbs for comfortable single-handed use. A full-wrap silicone grip reduces hand fatigue during longer grinding sessions and provides secure purchase without adding bulk. The crank detaches for compact storage, and the included custom roll-bag protects the grinder in a bag or luggage. At 11 x 3.5 x 4 inches, the Royal fits in a carry-on without displacing much else.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible With the Flair Power Tower\u003c\/h2\u003e\n\u003cp\u003eThe Royal Grinder is fully compatible with the Flair Power Tower, a 2-in-1 accessory that converts the Royal into an electric grinder using the same burr set. The Power Tower includes an internal rechargeable battery rated for one hour of unplugged grinding. The Power Tower is sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwiss-made conical burrs:\u003c\/strong\u003e 36mm hardened tool steel with high-efficiency geometry for consistent results across all brew methods\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e72-step adjustment:\u003c\/strong\u003e 0.02mm increments from fine espresso to coarse French press; lift, turn, and lock sleeve holds position without slipping\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision aluminum body:\u003c\/strong\u003e Anodized finish in black or silver; engineered for durability and low weight at 1.5 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull-wrap silicone grip:\u003c\/strong\u003e Reduces hand fatigue and improves control during grinding\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetachable crank and catch cup:\u003c\/strong\u003e Compact for storage and travel; custom roll-bag included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e1.5 lbs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e11 x 3.5 x 4 inches (28 x 9 x 10 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBurrs\u003c\/td\u003e\n      \u003ctd\u003eSwiss-made hardened tool steel, 36mm conical, high-efficiency geometry\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAdjustment range\u003c\/td\u003e\n      \u003ctd\u003e72 individual steps of 0.02mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody material\u003c\/td\u003e\n      \u003ctd\u003ePrecision-engineered aluminum, black or silver anodized\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGrip\u003c\/td\u003e\n      \u003ctd\u003eFull-wrap silicone\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIn the box\u003c\/td\u003e\n      \u003ctd\u003eRoyal body with detachable catch cup, detachable crank with thumb screw, custom roll-bag, cleaning brush, Quick Start Guide\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Royal Grinder suits home baristas and travelers who want espresso-capable grind precision without an electric grinder, particularly those building an all-manual brew setup around a Flair lever press or similar. Its 1.5 lb weight and roll-bag make it a practical daily carry for camping, travel, or office use.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Royal is a manual hand grinder and requires physical cranking for every dose; it is not suited to high-volume or back-to-back grinding without rest. Electric grinding capability requires the separately sold Flair Power Tower.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the Royal Grinder capable of grinding fine enough for espresso?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Royal Grinder is specifically designed as an espresso-capable hand grinder. Its 36mm Swiss-made conical burrs and 72-step adjustment system, with 0.02mm between each step, allow fine enough settings for espresso extraction, while the full range also covers coarser methods like French press.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many adjustment steps does the Royal have, and how far apart are they?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Royal Grinder has 72 individual adjustment steps, each spaced 0.02mm apart. The lift, turn, and lock sleeve holds the selected setting without slipping, making it straightforward to return to a dialed-in position after switching between grind sizes or bean types.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included with the Royal Grinder?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Royal Grinder ships with the grinder body and detachable catch cup, a detachable crank with thumb screw, a custom roll-bag for storage and travel, a cleaning brush, and a Quick Start Guide. The Flair Power Tower electric motor attachment is compatible but sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the Royal Grinder be used as an electric grinder?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Royal Grinder is a manual hand grinder on its own. It is fully compatible with the Flair Power Tower, a separately sold 2-in-1 accessory that motorizes the Royal using the same burrs and includes an internal rechargeable battery for up to one hour of unplugged electric grinding.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow portable is the Royal Grinder?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Royal Grinder weighs 1.5 lbs and measures 11 x 3.5 x 4 inches with the crank attached. The crank detaches for more compact storage, and the included custom roll-bag protects the grinder during travel. These dimensions fit comfortably in a carry-on bag or backpack.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Black","offer_id":68416703365341,"sku":"FLR-0G118263B","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/royal_grinder_2021_square_woo_black_optimized-1024x1024.jpg?v=1793759306"},{"product_id":"flair-ewizard-electric-milk-steamer-110v","title":"Flair eWizard Electric Milk Steamer 110V","description":"\u003cp class=\"product-lead\"\u003eThe Flair eWizard is a standalone electric milk steamer designed for home baristas who want cafe-quality microfoam and latte art without an espresso machine's built-in boiler. It produces powerful, dry steam from a 700ml tank, heats up in roughly five minutes, and runs on 110V systems only.\u003c\/p\u003e\n\n\u003ch2\u003eDry Steam That Textures Milk Like a Cafe Machine\u003c\/h2\u003e\n\u003cp\u003eThe eWizard generates powerful, dry steam capable of bringing refrigerator-cold milk to 60°C, the same texture window professional baristas target for microfoam. Dry steam stretches milk more efficiently than wet steam, which means tighter, glossier foam that holds its shape through a pour. For cappuccinos, cortados, and lattes, that consistency is the difference between a drink that looks and tastes right and one that doesn't.\u003c\/p\u003e\n\n\u003ch2\u003eA Steam Wand Built Around Control and Safety\u003c\/h2\u003e\n\u003cp\u003eThe cool-touch steam wand uses an internal and external liner so the wand surface stays safe to handle during and after steaming. It articulates 270° side to side and 15° up and down, giving both left- and right-handed users the angle they need to create a proper whirlpool in the pitcher. Two nozzles are included: a one-hole tip for beginners learning to control steam flow, and a three-hole tip for experienced home baristas who want faster, more aggressive aeration.\u003c\/p\u003e\n\n\u003ch2\u003ePressure Management You Can See\u003c\/h2\u003e\n\u003cp\u003eThe eWizard's pressure management system actively maintains optimal steaming pressure while the unit is on, so there is no waiting for a spike or guessing when to start. The lid carries an embedded pressure gauge with a marked Steaming Range, a visual indicator that shows at a glance whether the tank is ready to steam, depressurized, or needs a refill. Two safety systems back this up: an internal float switch that cuts power to the heating element if the water level drops too low, and an automatic pressure release valve that activates if internal pressure exceeds the safe range.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCool-touch articulating steam wand:\u003c\/strong\u003e internal and external liner keeps the wand surface safe; articulates 270° side to side and 15° up and down\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo nozzles included:\u003c\/strong\u003e one-hole tip for beginners, three-hole tip for experienced latte artists\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure management system:\u003c\/strong\u003e maintains optimal steaming pressure automatically while the unit is running\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEmbedded pressure gauge with Steaming Range:\u003c\/strong\u003e visual indicator shows ready-to-steam, depressurized, and refill states\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual safety systems:\u003c\/strong\u003e internal float switch cuts heating element power at low water; automatic pressure release valve activates at excess pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact footprint:\u003c\/strong\u003e 7.5 inches across at the base; fits standard kitchen counters alongside an espresso setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e6 lb (2.72 kg)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAssembled Dimensions\u003c\/td\u003e\n      \u003ctd\u003e7.5\" L x 7.5\" W x 13\" H (19 cm x 19 cm x 33 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTank Capacity\u003c\/td\u003e\n      \u003ctd\u003e700 ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSteam Capacity\u003c\/td\u003e\n      \u003ctd\u003e1\/2 gallon (1.9 liters) of milk from fridge temperature to 60°C per fill\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Requirements\u003c\/td\u003e\n      \u003ctd\u003e110V only. Not compatible with 220V systems, even with a converter.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWhat's in the Box\u003c\/td\u003e\n      \u003ctd\u003eeWizard electric base and tank, eWizard lid with gauge, cool-touch steam wand, 110V power cord, one-hole tip, three-hole tip, instruction manual\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe eWizard suits home baristas who pull espresso on a manual lever machine or any brewer without a built-in steam wand, and who want to produce genuine microfoam and latte art rather than simple froth. The two-nozzle system makes it accessible to beginners while giving experienced users the control they need for more advanced pours. The 700ml tank and 1.9-liter steam capacity per fill are well matched to single-household use.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe eWizard is not compatible with 220V electrical systems and cannot be adapted with a voltage converter. It is not a handheld or jug-style milk frother; it requires a separate milk steaming pitcher (not included) to use the steam wand. It is not designed for commercial or high-volume steaming environments.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow long does the eWizard take to heat up and be ready to steam?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair eWizard Electric Milk Steamer heats up in roughly five minutes from a cold start. The embedded pressure gauge on the lid shows a marked Steaming Range so you can see exactly when the unit has reached optimal steaming pressure and is ready to use.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the eWizard be used outside the United States on 220V power?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair eWizard is designed for 110V electrical systems only and cannot be used on 220V systems, even with a voltage converter. Buyers outside North America or in regions with 220V standard household current should not purchase this unit.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat nozzle should a beginner start with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe eWizard ships with two nozzles. Beginners should start with the one-hole tip, which produces a more controlled steam flow that is easier to manage while learning milk texturing technique. The three-hole tip is intended for experienced home baristas who want faster, more aggressive steam output similar to a commercial machine.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the eWizard come with a milk pitcher?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA milk steaming pitcher is not included with the Flair eWizard Electric Milk Steamer. To steam milk, you need a separate milk steaming jug along with cold milk of your choice. Flair offers a compatible milk steaming pitcher separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat safety features does the eWizard have?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair eWizard Electric Milk Steamer includes two built-in safety systems: an internal float switch that cuts power to the heating element if the water level in the tank drops too low, and an automatic pressure release valve that activates if internal pressure rises above the safe operating range. The steam wand also uses an internal and external liner to keep the wand surface cool to the touch during steaming.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416712245469,"sku":"FLR-0W120525B","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/ewizard_product_shot_woo_110v_optimized_2.jpg?v=1793759396"},{"product_id":"flair-wizard-stovetop-milk-steamer","title":"Flair Wizard Stovetop Milk Steamer","description":"\u003cp class=\"product-lead\"\u003eThe Flair Wizard is a stovetop milk steamer with a 700 ml capacity, designed for home baristas who want café-quality microfoam for lattes, cappuccinos, and cortados. It works on gas, coil, glass, and most induction cooktops, and ships with two steam nozzles suited to different skill levels.\u003c\/p\u003e\n\n\u003ch2\u003eSteam With Café-Level Pressure\u003c\/h2\u003e\n\u003cp\u003eThe Flair Wizard Stovetop Milk Steamer includes a custom pressure gauge with a marked steaming range, so you can see at a glance when the steamer is at the right pressure for frothing. That kind of feedback separates consistently textured microfoam from guesswork, giving you the same read-and-adjust rhythm a barista uses on a commercial machine. An automatic pressure release valve handles excess steam, so the steamer manages its own safety ceiling without any action from you.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Nozzles, One Steamer\u003c\/h2\u003e\n\u003cp\u003eThe Flair Wizard ships with both a 1-spout nozzle and a 3-spout nozzle. The single spout concentrates steam for the tight, controlled vortex that latte art requires; the three-spout nozzle distributes steam more broadly for faster, more forgiving frothing. Having both means the steamer grows with your technique rather than locking you into one approach from the start.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Everyday Handling\u003c\/h2\u003e\n\u003cp\u003eThe cool-touch steam wand stays safe to handle during and after steaming, which is a meaningful difference from bare metal wands that retain heat. The removable wooden handle gives a secure grip when moving the steamer from burner to counter, and it detaches for cleaning. The top and gauge are also removable, keeping every surface that contacts milk accessible to wash.\u003c\/p\u003e\n\n\u003ch2\u003eBroad Cooktop Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe Flair Wizard Stovetop Milk Steamer is compatible with gas, coil, glass, and most induction cooktops. Confirmed exceptions on induction are Bosch, Thermador Freedom, LG, and KitchenAid induction stoves; if your kitchen runs one of those, verify compatibility before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustom pressure gauge:\u003c\/strong\u003e marked steaming range shows when the steamer is ready to froth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAutomatic pressure release valve:\u003c\/strong\u003e vents excess steam automatically during use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCool-touch steam wand:\u003c\/strong\u003e stays safe to handle while steaming\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo steam nozzles included:\u003c\/strong\u003e 1-spout for latte art, 3-spout for general frothing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable wooden handle:\u003c\/strong\u003e ergonomic grip that detaches for cleaning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e700 ml capacity:\u003c\/strong\u003e enough to steam milk for multiple drinks in a single fill\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCapacity\u003c\/td\u003e\n      \u003ctd\u003e700 ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAssembled Height\u003c\/td\u003e\n      \u003ctd\u003e8.5 in (21.5 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBase Diameter\u003c\/td\u003e\n      \u003ctd\u003e4 in (10 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAssembled Weight\u003c\/td\u003e\n      \u003ctd\u003e3.3 lb (1.5 kg)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight in Box\u003c\/td\u003e\n      \u003ctd\u003e3.6 lb (1.65 kg)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBox Dimensions\u003c\/td\u003e\n      \u003ctd\u003e7.5 in L x 5.25 in W x 10 in H (19 x 13.3 x 25.4 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCooktop Compatibility\u003c\/td\u003e\n      \u003ctd\u003eGas, coil, glass, most induction (see exceptions above)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded Accessories\u003c\/td\u003e\n      \u003ctd\u003eSteamer body with removable top and gauge, cool-touch steam wand, 1-spout nozzle, 3-spout nozzle, removable wooden handle, quick start guide\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair Wizard suits home baristas at any skill level who want to steam and texture milk on a stovetop rather than with a battery or electric frother. Its 700 ml capacity and dual nozzles make it practical for single servings or back-to-back drinks, and its broad cooktop compatibility fits most home kitchens.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair Wizard is not an electric appliance and requires an active burner to operate. It is not suited to kitchens without a compatible cooktop, and it does not work on Bosch, Thermador Freedom, LG, or KitchenAid induction stoves. It is a milk steamer only and does not brew espresso or coffee.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Flair Wizard work on induction cooktops?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Wizard Stovetop Milk Steamer is compatible with most induction cooktops, but not all. Confirmed incompatible models include Bosch, Thermador Freedom, LG, and KitchenAid induction stoves. If you have one of those brands, check your specific model before ordering.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the capacity of the Wizard, and how much milk can it steam at once?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Wizard has a 700 ml water capacity, which the steamer's specifications rate as sufficient to steam approximately 1.5 gallons (6 liters) of milk, making it practical for multiple consecutive drinks without refilling.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the two included nozzles?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Wizard ships with a 1-spout nozzle and a 3-spout nozzle. The 1-spout concentrates steam into a single stream suited to creating the tight milk vortex needed for latte art. The 3-spout distributes steam more broadly, which is faster and more forgiving for everyday frothing.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the steam wand safe to touch while the Wizard is in use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair Wizard includes a cool-touch steam wand designed to remain safe to handle during steaming, unlike bare metal wands that retain heat. The removable wooden handle on the steamer body also stays cool during use.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat comes in the box with the Flair Wizard?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Wizard Stovetop Milk Steamer ships with the steamer body (including removable top and pressure gauge), the removable cool-touch steam wand, a 1-spout nozzle, a 3-spout nozzle, a removable wooden handle, and a quick start guide.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416718864605,"sku":"FLR-0W116573B","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/Wizard_steamer_product_shot.jpg?v=1793759490"},{"product_id":"flair-espresso-electric-gooseneck-kettle-900ml-110v","title":"Flair Espresso Electric Gooseneck Kettle 900ml 110V","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Electric Gooseneck Kettle is a 900ml, 110V electric kettle with to-the-digit digital temperature control and a 60-minute keep warm function, designed for precision water heating and pouring with Flair espresso makers or any home coffee brewing method.\u003c\/p\u003e\n\n\u003ch2\u003eDial In Your Water Temperature\u003c\/h2\u003e\n\u003cp\u003eThe Flair Kettle's digital display shows both your set-point temperature and the current water temperature simultaneously, in either Fahrenheit or Celsius. That dual readout lets you confirm the water is exactly where you want it before you pour: no guessing, no waiting for a thermometer. For manual espresso on a Flair lever press, where brew temperature directly shapes extraction, hitting the same degree every morning is the difference between a repeatable result and a variable one.\u003c\/p\u003e\n\n\u003ch2\u003eA Gooseneck Spout Built for Control\u003c\/h2\u003e\n\u003cp\u003eThe gooseneck spout slows and narrows the flow so you can direct water precisely into a Flair brew head, over a pour-over bed, or into a French press, without flooding or splashing. Controlled pour rate matters most in methods where water distribution affects extraction evenness, and a gooseneck gives you that control in a way a standard spout cannot.\u003c\/p\u003e\n\n\u003ch2\u003eKeep Warm Holds Your Water Ready\u003c\/h2\u003e\n\u003cp\u003eThe 60-minute keep warm function holds the kettle at your set temperature after it reaches it, so the water stays ready while you grind, dose, and tamp. For a home espresso workflow where preparation takes a few minutes, this removes the need to time your heat-up precisely or reheat between shots.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTo-the-digit temperature control:\u003c\/strong\u003e digital display lets you set an exact target temperature in Fahrenheit or Celsius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual temperature display:\u003c\/strong\u003e shows set-point and current water temperature at the same time\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGooseneck spout:\u003c\/strong\u003e delivers a slow, controlled pour suited to espresso, pour over, and other precision brew methods\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e60-minute keep warm:\u003c\/strong\u003e holds water at your set temperature for up to an hour after reaching it\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e900ml capacity:\u003c\/strong\u003e sized for single servings through multi-cup sessions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCapacity\u003c\/td\u003e\n      \u003ctd\u003e900ml \/ 30.5 fl oz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e2.9 lbs \/ 1.3 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBase Dimensions\u003c\/td\u003e\n      \u003ctd\u003e6 x 7.75 in \/ 15.25 x 19.7 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eKettle Height\u003c\/td\u003e\n      \u003ctd\u003e8 in \/ 20.3 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Requirements\u003c\/td\u003e\n      \u003ctd\u003e110V only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIn the Box\u003c\/td\u003e\n      \u003ctd\u003eKettle base with digital readout and 110V power cord, kettle body with gooseneck spout, kettle top, instruction manual\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair Kettle suits home espresso brewers, particularly those using Flair manual lever presses, as well as pour-over, French press, and other home brewing methods where water temperature and pour control affect the result. Its 900ml capacity covers single servings and small multi-cup sessions.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair Kettle runs on 110V only and is not compatible with 220V or 240V electrical systems. It is not a commercial or high-volume kettle.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Flair Kettle work with Flair espresso makers specifically?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Electric Gooseneck Kettle is designed to work with Flair espresso makers and is also suited to any other home coffee brewing method. Its gooseneck spout and to-the-digit temperature control make it well matched to the precise water temperatures manual espresso extraction requires.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I set the temperature in Celsius as well as Fahrenheit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair Kettle's digital temperature control operates in both Fahrenheit and Celsius, and the dual display shows your set-point alongside the current water temperature in whichever unit you choose.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow long does the keep warm function hold the temperature?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Kettle's keep warm function holds water at the set temperature for up to 60 minutes after the kettle reaches that temperature, so the water stays ready through a typical home espresso or pour-over preparation routine.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat voltage does the Flair Kettle require?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Kettle is rated for 110V electrical systems only and is not compatible with 220V or 240V systems.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat comes in the box with the Flair Kettle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Kettle ships with the kettle base (which includes the digital readout and 110V power cord), the kettle body with gooseneck spout, the kettle top, and an instruction manual.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416726499549,"sku":"FLR-6X121287B","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/Flair_kettle_white_bg.jpg?v=1793759565"},{"product_id":"flair-espresso-scale","title":"Flair Espresso Scale with Auto-Timer and Flow-Rate Indicator","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Scale is a compact, USB-C rechargeable digital scale designed for espresso and pour over brewing, offering three dedicated modes, an automatic tare-and-timer, and a live flow-rate light bar. It measures up to 2,000 grams in grams or ounces and fits a 95 x 90 x 16 mm footprint.\u003c\/p\u003e\n\n\u003ch2\u003eThree Modes Built Around How You Actually Brew\u003c\/h2\u003e\n\u003cp\u003eThe Flair Espresso Scale's Smart Espresso Mode removes the manual steps that interrupt a shot. Place your cup and the scale tares automatically; when espresso begins to flow, the timer starts on its own. The shot ends when the cup is removed or the weight holds steady for 10 seconds, at which point the scale displays your results with no button presses mid-pull.\u003c\/p\u003e\n\u003cp\u003eSmart Pour Over Mode tracks the full brew sequence in one pass. The scale records your dry coffee dose, tares for water, and starts timing as you pour. When you finish, it reports the coffee-to-water ratio, total water added, and brew time: the three numbers most useful for repeating or adjusting a recipe. Manual Mode leaves timing and weighing fully in your hands for any other workflow.\u003c\/p\u003e\n\n\u003ch2\u003eFlow Rate at a Glance\u003c\/h2\u003e\n\u003cp\u003eThe Flair Espresso Scale includes a flow-rate light bar that gives a continuous visual read on how fast liquid is moving through the puck or filter. For espresso, this makes it easier to catch a channeling shot or an under-extracted pull in real time rather than after the fact. For pour over, it helps maintain a consistent pour speed across multiple brews without watching the scale display directly.\u003c\/p\u003e\n\n\u003ch2\u003eRechargeable and Ready to Use\u003c\/h2\u003e\n\u003cp\u003eThe Flair Espresso Scale charges via USB-C and includes a battery indicator that flashes when charge is low, so it does not go dark mid-session without warning. A three-position power switch (Off, On, and On Silent) lets you mute all audio feedback when working in a quiet space. Units switch between grams and ounces with a double tap.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmart Espresso Mode:\u003c\/strong\u003e auto-tares on cup placement, auto-starts timer at flow, ends and displays results when the shot stops.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmart Pour Over Mode:\u003c\/strong\u003e records dose, auto-tares for water, times the pour, and reports ratio, total water, and brew time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow-rate light bar:\u003c\/strong\u003e continuous visual indicator of pour or extraction speed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUSB-C rechargeable:\u003c\/strong\u003e lithium battery with low-charge indicator; cable included.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilent mode:\u003c\/strong\u003e three-position switch (Off \/ On \/ On Silent) for quiet environments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrams or ounces:\u003c\/strong\u003e unit toggle via double tap; 2,000 g maximum capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions\u003c\/td\u003e\n      \u003ctd\u003e95 x 90 x 16 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum Capacity\u003c\/td\u003e\n      \u003ctd\u003e2,000 g\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUnits\u003c\/td\u003e\n      \u003ctd\u003eg \/ oz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModes\u003c\/td\u003e\n      \u003ctd\u003eManual, Smart Espresso, Smart Pour Over\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBattery\u003c\/td\u003e\n      \u003ctd\u003eLithium, USB-C rechargeable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIn the Box\u003c\/td\u003e\n      \u003ctd\u003eScale, transparent dosing tray, branded silicone sleeve, USB-C charging wire, instruction manual\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair Espresso Scale suits home brewers who want hands-free timing and automatic tare during espresso shots or pour over sessions, and who value a compact footprint (95 x 90 mm) that fits under most portafilters and pour over setups. It works equally well paired with a Flair manual espresso maker or any other brew method.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair Espresso Scale has a 2,000 g maximum capacity, which makes it unsuitable for batch brewing or green-coffee dosing at larger volumes. It does not connect to a smartphone app or output data to external logging software.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Flair Espresso Scale start the timer automatically, or do I have to press a button?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eIn Smart Espresso Mode, the Flair Espresso Scale starts its timer automatically when it detects espresso beginning to flow; no button press is needed. Placing the cup triggers an automatic tare, and the scale ends the shot and displays results when the cup is removed or the weight stops changing for 10 seconds.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the flow-rate light bar show?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe flow-rate light bar on the Flair Espresso Scale is a visual indicator of how quickly liquid is moving, whether through an espresso puck or during a pour over. It updates continuously so you can adjust your pour speed or catch an uneven extraction without looking away from the brew to read a number on the display.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the box with the Flair Espresso Scale?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Espresso Scale ships with a transparent dosing tray, a branded silicone sleeve, a USB-C charging wire, and an instruction manual. No separate power adapter is included; the scale charges from any standard USB-C power source.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the Flair Espresso Scale be used for pour over as well as espresso?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair Espresso Scale includes a dedicated Smart Pour Over Mode that records the dry coffee dose, tares automatically for water, times the pour, and reports the coffee-to-water ratio, total water added, and brew time when you finish. Manual Mode is also available for any other brewing method.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow does the Flair Espresso Scale charge, and how do I know when the battery is low?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Espresso Scale uses a USB-C rechargeable lithium battery; a USB-C charging wire is included in the box. A battery indicator on the scale flashes when the charge is low, giving advance notice before the scale loses power mid-session.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416730726621,"sku":"FLR-6X122017B","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/espresso_scale_white_1_shopify.jpg?v=1793759649"},{"product_id":"flair-weigh-cup-digital-dosing-scale","title":"Flair Espresso Weigh Cup Digital Dosing Scale","description":"\u003cp class=\"product-lead\"\u003eThe Flair Weigh Cup is a digital dosing scale with an integrated ceramic brewing cup, designed for home espresso brewers who want consistent, measured doses for every shot. The scale reads up to 500 g and switches between grams, milliliters, and ounces. The included Flair-branded ceramic cup has two marked cavities: 30 ml for a single shot and 60 ml for a double.\u003c\/p\u003e\n\n\u003ch2\u003eDose by Weight, Not by Eye\u003c\/h2\u003e\n\u003cp\u003eEspresso extraction is sensitive to dose: a gram or two of variance in your ground coffee changes the ratio, the flow rate, and the flavor in the cup. The Flair Weigh Cup puts a scale directly under your portafilter or dosing funnel so you weigh as you grind, rather than transferring grounds and losing track of what you actually dosed. That one-step workflow removes a common source of shot-to-shot inconsistency without adding complexity to the routine.\u003c\/p\u003e\n\n\u003ch2\u003eSingle and Double Shot Reference Built In\u003c\/h2\u003e\n\u003cp\u003eThe ceramic cup included with the Flair Weigh Cup carries two molded cavities (30 ml and 60 ml), so it doubles as a liquid measuring reference for yield alongside its role as a dosing vessel. For brewers dialing in a new coffee or a new grind setting, having a physical volume reference at hand alongside the gram readout makes it easier to track both dose and yield without a separate measuring cup.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible Units for Any Workflow\u003c\/h2\u003e\n\u003cp\u003eThe Flair Weigh Cup switches between grams, milliliters, and ounces, so it fits into recipes written in any unit system. Whether a recipe calls for 18 g of ground coffee and a 36 g yield or is written in ounces, the scale reads in the unit that matches with no mental conversion required mid-brew.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e500 g capacity:\u003c\/strong\u003e weighs up to 500 grams of coffee beans or grounds for precise dosing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-unit display:\u003c\/strong\u003e switches between grams, milliliters, and ounces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded ceramic cup:\u003c\/strong\u003e Flair-branded cup with 30 ml and 60 ml cavities for single and double espresso shots.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital interface:\u003c\/strong\u003e dedicated display for clear, accurate readouts during dosing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eScale capacity\u003c\/td\u003e\n      \u003ctd\u003e500 g\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUnits of measurement\u003c\/td\u003e\n      \u003ctd\u003eGrams, milliliters, ounces\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded ceramic cup cavities\u003c\/td\u003e\n      \u003ctd\u003e30 ml (single shot), 60 ml (double shot)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShip weight\u003c\/td\u003e\n      \u003ctd\u003e0.8 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair Weigh Cup suits home espresso brewers, particularly those using Flair manual lever machines, who want to dose by weight and track single or double shot volumes without a separate scale and measuring cup. It works equally well for any grind-and-dose workflow where a 500 g capacity is sufficient.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair Weigh Cup is a dosing scale used before brewing, not a brewing scale for measuring yield during extraction. It is not suited to workflows requiring capacity above 500 g, and it does not replace a dedicated shot timer or in-shot drip scale.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the Flair Weigh Cup actually measure?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Weigh Cup is a digital dosing scale with a 500 g maximum capacity. It measures in grams, milliliters, or ounces and is used to weigh ground coffee before it goes into a portafilter or brew head. The included ceramic cup has two cavities (30 ml and 60 ml) for referencing single and double espresso shot volumes.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the ceramic cup used for brewing espresso directly?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ceramic cup included with the Flair Weigh Cup is a dosing and measuring vessel, not a brew head or portafilter basket. Its 30 ml and 60 ml cavities serve as volume references for espresso yield. Espresso is brewed separately through a Flair lever machine or other espresso maker.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Flair Weigh Cup work with Flair espresso makers other than one specific model?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Weigh Cup is a standalone dosing scale and is not mechanically attached to any Flair brew head. It can be used alongside any Flair manual espresso maker, or any other espresso workflow, where weighing ground coffee before dosing is part of the routine.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the Flair Weigh Cup be used to weigh whole beans before grinding?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair Weigh Cup's 500 g scale capacity and gram readout make it suitable for weighing whole coffee beans before grinding, not only ground coffee. Weighing whole beans before grinding is a common approach to dose consistency in espresso workflows.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416732594397,"sku":"FLR-6X116450B","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-weigh-cup-lifestyle-5-woo.jpg?v=1793759727"},{"product_id":"flair-espresso-milk-steaming-pitcher-400ml","title":"Flair Espresso Milk Steaming Pitcher 400ml","description":"\u003cp class=\"product-lead\"\u003eThe Flair Milk Steaming Pitcher is a 400ml stainless steel steaming pitcher designed for home baristas and prosumers who want precise control over milk temperature and pour. Its removable handle and full-wrap silicone grip let you switch between handle-on and handle-free pouring to suit your technique, and laser-etched interior measurements from 100ml to 350ml make it easy to repeat your results.\u003c\/p\u003e\n\n\u003ch2\u003eRemovable Handle for Two Pouring Styles\u003c\/h2\u003e\n\u003cp\u003eThe Flair Milk Steaming Pitcher's handle detaches completely, so you can choose the grip that matches your pouring preference. With the handle attached, you get the familiar leverage most baristas learn on. Without it, you can rest the pitcher on a cup's edge and feel the heat directly through the silicone wrap, a technique many experienced pourers prefer for tactile feedback during latte art. A set screw keeps the handle firmly in place when you want it, and the thermometer clip transfers with it either way.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt-In Thermometer Slot for Accurate Temperature Monitoring\u003c\/h2\u003e\n\u003cp\u003eAn integrated thermometer slot is built directly into the handle, and a clip on the handle accommodates a thermometer when the handle is removed. This means a thermometer stays positioned at the same point in the milk every pour, giving you consistent temperature readings rather than guesswork. Monitoring milk temperature precisely matters because the window between silky microfoam and overheated, flat milk is narrow: a few degrees either way changes the texture and sweetness of the finished drink.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Consistent Pours and Latte Art\u003c\/h2\u003e\n\u003cp\u003eThe Flair Milk Steaming Pitcher's front crease begins one-third up the body and serves two purposes: it positions the steam wand naturally without hunting for the right angle, and it channels milk flow for a smooth, controlled stream. At the spout, a rounded tip narrows the pour to a fine, steady line suited to detailed latte art patterns. The full-wrap silicone grip covers the body without adding bulk, so the pitcher sits comfortably against a cup's rim during a pour.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e400ml stainless steel body:\u003c\/strong\u003e holds enough milk for cortados, cappuccinos, and small lattes, with a 13.5 oz total capacity\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLaser-etched interior measurements:\u003c\/strong\u003e markings from 100ml to 350ml let you measure milk directly in the pitcher without a separate cup\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable handle with thermometer clip:\u003c\/strong\u003e detaches via set screw; thermometer slot functions with handle on or off\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull-wrap silicone grip:\u003c\/strong\u003e heat-resistant, covers the body for comfort and protection without obstructing the pour\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFront crease and rounded spout tip:\u003c\/strong\u003e crease guides steam wand placement and milk flow; rounded tip supports precision pours and latte art\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCapacity\u003c\/td\u003e\n      \u003ctd\u003e400ml (13.5 oz)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInterior measurement markings\u003c\/td\u003e\n      \u003ctd\u003eLaser-etched, 100ml to 350ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody material\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGrip material\u003c\/td\u003e\n      \u003ctd\u003eHeat-resistant silicone (full-wrap)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHandle\u003c\/td\u003e\n      \u003ctd\u003eRemovable, with integrated thermometer clip; secured by set screw\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWhat's in the box\u003c\/td\u003e\n      \u003ctd\u003e400ml stainless steel pitcher with silicone wrap; removable handle with thermometer clip; set screw; manual\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair Milk Steaming Pitcher suits home baristas and prosumers who steam milk regularly and want repeatable results, particularly those working on latte art or dialing in milk temperature with a thermometer. The 400ml capacity is sized for single-serve drinks: cortados, cappuccinos, and small lattes.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair Milk Steaming Pitcher is not suited to steaming large volumes in one pour; its 400ml capacity is intentionally sized for single-serve drinks, not multi-cup batches. A thermometer is not included in the box; the handle and clip are designed to accept one, but it must be sourced separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Flair Milk Steaming Pitcher come with a thermometer?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair Milk Steaming Pitcher includes the 400ml stainless steel body with silicone wrap, the removable handle with thermometer clip, a set screw, and a manual. A thermometer is not included; the integrated clip in the handle is designed to hold a compatible thermometer purchased separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I use the pitcher without the handle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The handle on the Flair Milk Steaming Pitcher detaches via a set screw, and the full-wrap silicone grip provides heat protection and a secure hold when pouring handle-free. The thermometer clip transfers to the handle-off position as well, so temperature monitoring is not affected.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow much milk can the pitcher hold, and what drinks is it sized for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Milk Steaming Pitcher holds 400ml (13.5 oz) total, with laser-etched interior markings from 100ml to 350ml. That range covers the milk volumes typical for cortados, cappuccinos, and small lattes: single-serve drinks rather than multi-cup batches.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the front crease do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe front crease on the Flair Milk Steaming Pitcher starts one-third up the body and serves two purposes: it gives the steam wand a natural resting position so you don't have to hunt for the right angle, and it channels milk flow for a smooth, consistent stream during the pour.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the silicone grip removable for cleaning?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Milk Steaming Pitcher's product data does not confirm whether the full-wrap silicone grip is removable from the stainless steel body. The handle detaches via set screw and can be removed for cleaning separately from the body.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416740819165,"sku":"FLR-0M119109N","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/flair_milk_pitcher_Handle_Out_2.jpg?v=1793759810"},{"product_id":"flair-espresso-58mm-stainless-steel-tamper","title":"Flair Espresso 58mm Stainless Steel Tamper","description":"\u003cp class=\"product-lead\"\u003eThe Flair 58 Tamper is a stainless steel tamper designed specifically for the Flair 58 Portafilter and compatible with any standard 58mm basket. Its ergonomic handle features protruding textures for a secure, controlled grip at the moment of compression.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Clean, Consistent Contact\u003c\/h2\u003e\n\u003cp\u003eThe Flair 58 Tamper is machined from stainless steel, a material that resists corrosion and transfers no off-flavors to the puck surface. A clean, flat tamping face means even pressure distribution across the full 58mm bed, which is the foundation of a well-extracted shot on any lever press that uses a 58mm basket.\u003c\/p\u003e\n\n\u003ch2\u003eGrip That Holds Under Pressure\u003c\/h2\u003e\n\u003cp\u003eThe handle of the Flair 58 Tamper is shaped with protruding textures that give your hand something to hold onto when applying firm, downward force. On a manual lever machine, where the quality of the puck preparation directly affects resistance and flow, a tamper that stays planted in your grip removes one variable from the process.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e durable material that makes clean contact with the coffee puck\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e58mm base diameter:\u003c\/strong\u003e designed for the Flair 58 Portafilter; fits any compatible 58mm basket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eErgonomic handle:\u003c\/strong\u003e protruding textures provide grip and control during tamping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBase diameter\u003c\/td\u003e\n      \u003ctd\u003e58mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.35 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair 58 Tamper suits owners of the Flair 58 or Flair 58 Plus 2 who need a replacement tamper, and anyone using a portafilter or basket with a standard 58mm inner diameter.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis tamper is not designed for Flair models that use a smaller basket diameter, including the Flair PRO 2, PRO 3, 49 PRO, NEO, Classic, or 2GO; those models use a different basket size and require a tamper matched to their own portafilter.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models is this tamper made for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Tamper was designed specifically for the Flair 58 Portafilter, which is used with the Flair 58 and Flair 58 Plus 2 espresso makers. It will also fit any other portafilter or basket with a compatible 58mm inner diameter.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this tamper work with non-Flair portafilters?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair 58 Tamper fits any basket with a compatible 58mm inner diameter, so it can be used with third-party portafilters or baskets that share that standard size, not only Flair's own hardware.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the tamper made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Tamper is crafted from stainless steel, which provides a clean, neutral contact surface against the coffee puck and holds up to regular use without corroding.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416741572829,"sku":"FLR-25210349N","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-flair-58-tamper-woo-square.jpg?v=1793759842"},{"product_id":"flair-58-walnut-palm-tamper","title":"Flair Espresso 58 Walnut Palm Tamper","description":"\u003cp class=\"product-lead\"\u003eThe Flair 58 Walnut Palm Tamper is a branded walnut tamper designed specifically for the Flair 58 espresso maker, compatible with both the high-flow and low-flow baskets sold with that brewer.\u003c\/p\u003e\n\n\u003ch2\u003eA Tamper Built for the Flair 58\u003c\/h2\u003e\n\u003cp\u003eThe Flair 58 Walnut Palm Tamper was originally included exclusively with the Flair 58 Limited Edition, and is now available as a standalone upgrade for any Flair 58 owner. The palm tamper shape distributes pressure evenly across the puck, which supports consistent extraction on every pull. Because it is sized and shaped specifically for the Flair 58 baskets, there is no guesswork about fit.\u003c\/p\u003e\n\n\u003ch2\u003eFits Both Basket Types\u003c\/h2\u003e\n\u003cp\u003eThe tamper seats correctly in both the high-flow and low-flow baskets sold with the Flair 58. Switching between basket types does not require a different tamper, so the walnut tamper works across the full range of Flair 58 brewing configurations without modification.\u003c\/p\u003e\n\n\u003ch2\u003eWalnut Construction\u003c\/h2\u003e\n\u003cp\u003eThe tamper body is walnut, a dense hardwood that is comfortable to hold and develops a natural patina with use. The material is a practical choice for a hand tool that sees daily contact, and the warm grain of walnut is a visual contrast to the stainless and aluminum components of the Flair 58 brew head.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlair 58 compatibility:\u003c\/strong\u003e fits both the high-flow and low-flow baskets sold with the Flair 58\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePalm tamper shape:\u003c\/strong\u003e ergonomic form for consistent downward pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWalnut construction:\u003c\/strong\u003e dense hardwood body with natural grain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBranded design:\u003c\/strong\u003e originally exclusive to the Flair 58 Limited Edition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eWalnut\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible baskets\u003c\/td\u003e\n      \u003ctd\u003eFlair 58 high-flow and low-flow baskets\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible brewer\u003c\/td\u003e\n      \u003ctd\u003eFlair 58\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.35 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair 58 Walnut Palm Tamper suits Flair 58 owners who want a tamper matched to their brewer's baskets, or who are replacing or upgrading from a generic tamper. It works with both the high-flow and low-flow basket configurations.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis tamper is not compatible with other Flair models, including the Flair PRO 2, PRO 3, 49 PRO, NEO, Classic, or 2GO. It is a manual tamper only and does not include a dosing funnel, distribution tool, or any other puck preparation accessory.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this tamper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Walnut Palm Tamper is designed for the Flair 58 only. It fits both the high-flow and low-flow baskets sold with the Flair 58. It is not listed as compatible with other Flair models such as the PRO 2, PRO 3, 49 PRO, NEO, Classic, or 2GO.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this tamper work with both the high-flow and low-flow baskets?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair 58 Walnut Palm Tamper seats correctly in both the high-flow and low-flow baskets sold with the Flair 58, so it does not need to be swapped out when changing basket configurations.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWas this tamper previously available separately?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Walnut Palm Tamper was originally included only with the Flair 58 Limited Edition. It is now sold separately, allowing any Flair 58 owner to add it as a standalone upgrade.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416744063197,"sku":"FLR-25112926N","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-flair-58-le-tamper-woo.jpg?v=1793759875"},{"product_id":"flair-49-pro-stainless-steel-palm-tamper","title":"Flair 49 PRO Stainless Steel Palm Tamper","description":"\u003cp class=\"product-lead\"\u003eThe Flair 49 PRO Tamper is a stainless steel palm tamper designed as a replacement or spare for the Flair 49 PRO espresso maker. It fits both the Flair 49 PRO bottomless basket and the Flair 49 PRO pressurized basket.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for the Flair 49 PRO\u003c\/h2\u003e\n\u003cp\u003eThe Flair 49 PRO Tamper is machined from stainless steel and sized specifically for the Flair 49 PRO's basket geometry. Tamp consistency directly affects how evenly water flows through the puck, and a tamper sized precisely for the basket helps maintain the even resistance that manual lever brewing depends on. An approximate substitute introduces variability that a well-fitted tamper avoids.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Baskets, One Tamper\u003c\/h2\u003e\n\u003cp\u003eThe Flair 49 PRO Tamper fits both the bottomless and pressurized versions of the Flair 49 PRO basket, so it works whether the brew head in use is set up for open-flow espresso or the pressurized configuration. Keeping a spare on hand means a lost or damaged tamper does not interrupt a brewing session.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e durable, corrosion-resistant material suited to daily tamping use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePalm tamper form factor:\u003c\/strong\u003e designed for direct downward pressure without a handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual basket compatibility:\u003c\/strong\u003e fits both the Flair 49 PRO bottomless and pressurized baskets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplacement or spare:\u003c\/strong\u003e available individually for owners who need an extra or a substitute\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eType\u003c\/td\u003e\n      \u003ctd\u003ePalm tamper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible models\u003c\/td\u003e\n      \u003ctd\u003eFlair 49 PRO\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible baskets\u003c\/td\u003e\n      \u003ctd\u003eFlair 49 PRO bottomless basket, Flair 49 PRO pressurized basket\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair 49 PRO Tamper suits Flair 49 PRO owners who need to replace a lost or worn tamper, or who want a dedicated spare so one is always within reach at the brew station.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair 49 PRO Tamper is not compatible with other Flair models (including the Flair 58, Flair 58 Plus 2, Flair PRO 2, Flair PRO 3, Flair Classic, Flair NEO, or Flair 2GO) and is not a universal tamper sized for other espresso equipment.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this tamper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 49 PRO Tamper fits the Flair 49 PRO only. It is sized for the Flair 49 PRO basket and is not interchangeable with tampers for other Flair models such as the Flair 58, PRO 2, PRO 3, Classic, NEO, or 2GO.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes it work with both the bottomless and pressurized baskets?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair 49 PRO Tamper fits both the Flair 49 PRO bottomless basket and the Flair 49 PRO pressurized basket, so it is usable regardless of which basket configuration is in the brew head.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs this a replacement part or does it come with a new Flair 49 PRO?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 49 PRO Tamper is sold individually as a replacement or spare. It is not bundled with the Flair 49 PRO espresso maker; it is purchased separately when an additional or substitute tamper is needed.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416746914013,"sku":"FLR-24119970N","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-flair-49-tamper-woo-optimized.jpg?v=1793759925"},{"product_id":"flair-espresso-pro-stainless-steel-tamper","title":"Flair Espresso Pro Stainless Steel Tamper","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Pro Stainless Steel Tamper is a stainless steel tamper designed for use with the Flair PRO and PRO 2 espresso makers. It is not compatible with the Flair Classic or Signature series.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for the Flair PRO Platform\u003c\/h2\u003e\n\u003cp\u003eThe Pro Stainless Steel Tamper is made to fit the portafilter baskets used in the Flair PRO and PRO 2 brew heads. A properly fitted tamper produces a level, even puck, and an even puck is what separates a channeled, uneven shot from one that extracts cleanly across the full bed of grounds. Using a tamper sized and shaped for your specific brew head removes one variable from the process.\u003c\/p\u003e\n\n\u003ch2\u003eStainless Steel Construction\u003c\/h2\u003e\n\u003cp\u003eThe tamper body is stainless steel throughout. Stainless steel resists corrosion from moisture and coffee oils, holds its shape under repeated tamping pressure, and is straightforward to wipe clean between uses. For a tool that contacts your puck on every shot, material consistency matters for both hygiene and longevity.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e durable, corrosion-resistant body suited to daily use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO and PRO 2 compatibility:\u003c\/strong\u003e sized for the Flair PRO and PRO 2 brew head baskets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplacement or upgrade option:\u003c\/strong\u003e fits the same portafilter platform as the original included tamper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible models\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO, Flair PRO 2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNot compatible with\u003c\/td\u003e\n      \u003ctd\u003eFlair Classic, Flair Signature series\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight (shipping)\u003c\/td\u003e\n      \u003ctd\u003e0.5 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis tamper suits Flair PRO and PRO 2 owners who want a replacement tamper or a spare in stainless steel for their existing brew head setup.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis tamper is not compatible with the Flair Classic or Flair Signature series and should not be purchased for those brew heads.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this tamper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Espresso Pro Stainless Steel Tamper is compatible with the Flair PRO and Flair PRO 2 espresso makers. It is not compatible with the Flair Classic or Flair Signature series brew heads.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs this tamper made entirely of stainless steel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair Espresso Pro Stainless Steel Tamper is constructed from stainless steel, which resists corrosion and holds up to repeated daily use.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan this tamper be used as a direct replacement for the tamper that came with my Flair PRO?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Pro Stainless Steel Tamper is designed for the same PRO and PRO 2 brew head platform, making it a suitable replacement for the tamper originally included with those models.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416753565917,"sku":"FLR-2P822456N","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-7c3a15-d892982fc5af43a8ae7d1d3e3942ce0b-mv2-d-2100-1500-s-sq.jpg?v=1793759976"},{"product_id":"flair-espresso-stainless-steel-tamper","title":"Flair Espresso Stainless Steel Tamper","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Stainless Steel Tamper is a solid stainless steel tamper custom-made to fit the Flair portafilter, offering a more precise and polished tamp than the polycarbonate tamper included with every Flair espresso maker.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for the Flair Portafilter\u003c\/h2\u003e\n\u003cp\u003eThe Flair portafilter has a specific size and geometry, and this tamper is made to match it exactly. A tamper that fits the basket properly seats flush across the full surface of the puck, which is the foundation of an even extraction. The stainless steel construction gives the tamper enough weight to tamp with consistent, controlled pressure rather than relying on hand strength alone.\u003c\/p\u003e\n\n\u003ch2\u003eA More Consistent Tamp\u003c\/h2\u003e\n\u003cp\u003eThe polycarbonate tamper that ships with every Flair espresso maker is functional, but stainless steel offers a smoother, more polished contact surface. A flat, smooth base leaves the puck surface uniform, which helps water distribute evenly during the pull. For anyone working to dial in a repeatable shot, the material upgrade is a practical one, not just an aesthetic one.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSolid stainless steel construction:\u003c\/strong\u003e durable material with a polished tamping surface\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustom fit:\u003c\/strong\u003e sized and shaped specifically for the Flair portafilter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUpgrade over the included tamper:\u003c\/strong\u003e replaces the polycarbonate tamper that ships with every Flair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSolid stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.5 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility\u003c\/td\u003e\n      \u003ctd\u003eFlair portafilter\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis tamper suits any Flair espresso maker owner who wants a more precise, polished tamp and prefers stainless steel over the polycarbonate tamper already included with their machine.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis tamper is not a universal tamper and is not designed for portafilters outside the Flair lineup. It is a tamping tool only, not a replacement for any brew head component.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Flair already come with a tamper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEvery Flair espresso maker includes a polycarbonate tamper in the box. The Flair Stainless Steel Tamper is an optional upgrade for owners who want a more precise, polished tamping surface and the added weight of solid stainless steel construction.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between this and the included polycarbonate tamper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Stainless Steel Tamper is made from solid stainless steel rather than polycarbonate. Stainless steel provides a smoother, more polished contact surface and greater mass, which can help deliver a more even, consistent tamp across the coffee puck.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416754974941,"sku":"FLR-2X791826N","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-stainless-steel-tamper-standard-woo.jpg?v=1793760029"},{"product_id":"flair-2go-tamper","title":"Flair 2GO Tamper","description":"\u003cp class=\"product-lead\"\u003eThe Flair 2GO Tamper is a stainless steel replacement or spare tamper designed specifically for the Flair 2GO manual lever espresso maker. Its press-fit knob keeps the profile compact enough to fit inside the Flair 2GO case without adding meaningful weight to a travel setup.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for the Flair 2GO\u003c\/h2\u003e\n\u003cp\u003eThe Flair 2GO Tamper is sized and shaped to live inside the Flair 2GO case, so it travels with the brewer rather than requiring a separate pouch or pocket. Stainless steel construction keeps it durable through repeated use without adding bulk, which matters when every gram counts in a carry-on or backpack.\u003c\/p\u003e\n\n\u003ch2\u003eFunctional and Unobtrusive\u003c\/h2\u003e\n\u003cp\u003eThe press-fit knob gives a secure grip during tamping without the added height of a traditional handle. For a manual espresso setup built around portability, a tamper that disappears into the case is a practical advantage over carrying a full-size tamper alongside the brewer.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e durable material suited to daily travel use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePress-fit knob:\u003c\/strong\u003e low-profile grip that keeps the overall height minimal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCase-compatible sizing:\u003c\/strong\u003e fits inside the Flair 2GO case without occupying extra space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimal weight:\u003c\/strong\u003e adds negligible mass to a portable espresso kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eKnob type\u003c\/td\u003e\n      \u003ctd\u003ePress-fit\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible brewer\u003c\/td\u003e\n      \u003ctd\u003eFlair 2GO\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair 2GO Tamper suits Flair 2GO owners who need a replacement tamper or want a spare to keep at home while one travels with the brewer. Its case-compatible dimensions make it the straightforward choice for anyone who wants a complete, self-contained travel espresso kit.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis tamper is designed for the Flair 2GO specifically. It is not a universal tamper: Flair lists it for the 2GO only, not for other Flair models or standard 58 mm portafilters.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair brewer does this tamper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 2GO Tamper is designed for the Flair 2GO manual lever espresso maker. It is sized to fit inside the Flair 2GO travel case. Flair lists it for the 2GO only.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the tamper made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 2GO Tamper is made of stainless steel with a press-fit knob. Stainless steel resists corrosion and holds up to regular use in a travel context.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this tamper fit inside the Flair 2GO case?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair 2GO Tamper is specifically noted as fitting inside the Flair 2GO case without occupying extra room or adding meaningful weight to the overall travel setup.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416760643805,"sku":"FLR-2O117518N","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-flair-2go-tamper-woo.jpg?v=1793760060"},{"product_id":"flair-49-pro-magnetic-funnel","title":"Flair 49 PRO Magnetic Dosing Funnel","description":"\u003cp class=\"product-lead\"\u003eThe Flair 49 PRO Magnetic Funnel is a dosing and tamping accessory designed for 49mm portafilters, attaching to the portafilter rim via six built-in magnets to keep grounds contained from grinder to tamp.\u003c\/p\u003e\n\n\u003ch2\u003eDose and Tamp Without Removing the Funnel\u003c\/h2\u003e\n\u003cp\u003eThe Flair 49 PRO Magnetic Funnel sits directly above the basket, guiding grounds into the portafilter rather than onto the counter. The center opening is wide enough for a tamper to pass straight through, so there is no need to lift the funnel off between dosing, distributing, and tamping. That uninterrupted sequence keeps puck preparation consistent and the prep area clean.\u003c\/p\u003e\n\n\u003ch2\u003eSix Magnets, Secure Attachment\u003c\/h2\u003e\n\u003cp\u003eSix magnets set into the base of the funnel grip the rim of a 49mm portafilter without clips or adapters. The magnetic connection is strong enough to hold the funnel in place while grounds are added and a tamper is pressed through, yet releases cleanly when the portafilter needs to move to the group head.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSix built-in magnets:\u003c\/strong\u003e attach securely to the rim of a 49mm portafilter without tools or adapters\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrounds containment:\u003c\/strong\u003e funnel sits above the basket and directs grounds in during dosing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTamp-through design:\u003c\/strong\u003e tamper fits through the funnel opening so it stays in place from dose to tamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePortafilter compatibility\u003c\/td\u003e\n      \u003ctd\u003e49mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAttachment method\u003c\/td\u003e\n      \u003ctd\u003eSix built-in magnets\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.25 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair 49 PRO Magnetic Funnel suits anyone using a 49mm portafilter who wants a cleaner dosing workflow, particularly Flair 49 PRO users looking to reduce counter mess and move from dosing to tamping without interruption.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair 49 PRO Magnetic Funnel is not compatible with portafilters larger or smaller than 49mm, and it does not fit Flair models that use a different basket diameter such as the Flair 58 or Flair 58 Plus 2.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this funnel fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 49 PRO Magnetic Funnel is designed for the Flair 49 PRO, which uses a 49mm portafilter. It attaches magnetically to the portafilter rim and is not intended for Flair models with a different basket diameter, such as the Flair 58 or Flair 58 Plus 2.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I need to remove the funnel before tamping?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair 49 PRO Magnetic Funnel has a center opening wide enough for a tamper to pass through. The funnel stays on the portafilter rim during dosing, distribution, and tamping; removing it before each tamp is not part of the workflow.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow does the funnel stay attached to the portafilter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eSix magnets set into the base of the Flair 49 PRO Magnetic Funnel grip the steel rim of a 49mm portafilter. No clips, bands, or adapters are required; the magnetic connection holds the funnel in place during use and releases when pulled free.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416762413277,"sku":"FLR-24121492B","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/49_Pro_Magnetic_Funnel_Shopify_1.jpg?v=1793760117"},{"product_id":"flair-second-shot-plus-2026","title":"Flair Second Shot Plus 2026 Brewing Kit","description":"\u003cp class=\"product-lead\"\u003eThe Flair Second Shot Plus 2026 is a back-to-back brewing kit for the Flair Classic, Flair 2GO, and NEO Flex manual lever espresso makers. It adds a second portafilter and a heat-efficient Thin Cylinder so you can grind, fill, and tamp multiple baskets in advance, then pull shot after shot without stopping to clean between them. The kit is available in two configurations: Bottomless 2-in-1 Portafilter or Flow Control Portafilter.\u003c\/p\u003e\n\n\u003ch2\u003ePull Multiple Shots Without Interruption\u003c\/h2\u003e\n\u003cp\u003eThe Second Shot Plus 2026 is built around a simple workflow: prepare all your portafilters before you start pulling, then extract one shot after another in sequence. Because you have a second loaded basket ready to go, there is no pause to knock out grounds, rinse, and re-dose between guests or between your own double-shot routine. For anyone who regularly makes espresso for two or more people on a Flair Classic, 2GO, or NEO Flex, that uninterrupted rhythm is the practical payoff of this kit.\u003c\/p\u003e\n\n\u003ch2\u003eHeat-Efficient Thin Cylinder\u003c\/h2\u003e\n\u003cp\u003eThe Thin Cylinder included in this kit is designed to retain heat more efficiently than a standard cylinder, which matters when you are pulling consecutive shots. Maintaining consistent brew-chamber temperature across multiple extractions helps keep your results repeatable: the second shot behaves like the first rather than dropping off as the cylinder cools. The silicone sleeve protects your hands during back-to-back use.\u003c\/p\u003e\n\n\u003ch2\u003ePressure Gauge for Every Pull\u003c\/h2\u003e\n\u003cp\u003eThe kit includes a black piston with an integrated black pressure gauge, so you can monitor extraction pressure on each shot rather than relying on feel alone. Paired with the stainless steel dispersion screen, which distributes water evenly across the puck, the setup gives you the feedback and consistency tools to dial in a recipe and repeat it across multiple pulls.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThin Cylinder with silicone sleeve:\u003c\/strong\u003e heat-efficient brew chamber for consecutive shots\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecond portafilter:\u003c\/strong\u003e Bottomless 2-in-1 or Flow Control, depending on configuration chosen\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlack piston with pressure gauge:\u003c\/strong\u003e monitors extraction pressure on every pull\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel dispersion screen:\u003c\/strong\u003e even water distribution across the coffee puck\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eItem\u003c\/th\u003e\n      \u003cth\u003eBottomless Configuration\u003c\/th\u003e\n      \u003cth\u003eFlow Control Configuration\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCylinder\u003c\/td\u003e\n      \u003ctd\u003eThin Cylinder with silicone sleeve\u003c\/td\u003e\n      \u003ctd\u003eThin Cylinder with silicone sleeve\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePortafilter\u003c\/td\u003e\n      \u003ctd\u003eBottomless 2-in-1 Portafilter\u003c\/td\u003e\n      \u003ctd\u003eFlow Control Portafilter\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePiston\u003c\/td\u003e\n      \u003ctd\u003eBlack piston with black pressure gauge\u003c\/td\u003e\n      \u003ctd\u003eBlack piston with black pressure gauge\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDispersion screen\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible models\u003c\/td\u003e\n      \u003ctd\u003eFlair Classic, Flair 2GO, NEO Flex\u003c\/td\u003e\n      \u003ctd\u003eFlair Classic, Flair 2GO, NEO Flex\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Second Shot Plus 2026 suits Flair Classic, Flair 2GO, or NEO Flex owners who regularly pull two or more shots in a session: households of two, small gatherings, or anyone who wants a standby loaded portafilter to keep their workflow moving. The Flow Control configuration suits brewers who want to adjust flow rate mid-extraction; the Bottomless configuration suits those who prefer a standard open basket for puck inspection.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit is not compatible with any Flair PRO model (PRO 2, PRO 3, or 49 PRO). It does not add electric heating, a pump, or automation of any kind. The Flair Classic, 2GO, and NEO Flex remain fully manual lever espresso makers. If your machine is a PRO-series Flair, this kit will not fit.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does the Second Shot Plus 2026 fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Second Shot Plus 2026 is compatible with the Flair Classic, Flair 2GO, and NEO Flex. It is not compatible with any Flair PRO model, including the PRO 2, PRO 3, and 49 PRO. If you are unsure which model you own, check the base of your Flair or contact CRC before ordering.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the Bottomless and Flow Control configurations?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBoth Second Shot Plus 2026 configurations include the same Thin Cylinder, black piston with pressure gauge, and stainless steel dispersion screen. The difference is the portafilter: the Bottomless configuration includes a 2-in-1 Bottomless Portafilter, while the Flow Control configuration includes a Flow Control Portafilter that lets you adjust the flow rate during extraction.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I need to clean the first portafilter before using the second one?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The purpose of the Second Shot Plus 2026 is to let you pre-load both portafilters before you begin pulling shots. You grind, fill, and tamp each basket in advance, then extract shots back to back. Cleaning happens after the session, not between shots.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Second Shot Plus 2026 include a pressure gauge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Both configurations of the Second Shot Plus 2026 include a black piston with an integrated black pressure gauge, so you can monitor extraction pressure on every pull without purchasing a gauge separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this kit make the Flair electric or add a pump?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Second Shot Plus 2026 is a manual brewing kit. It adds a second portafilter, a Thin Cylinder, a pressure-gauge piston, and a dispersion screen. The Flair Classic, 2GO, and NEO Flex remain fully manual lever espresso makers with no pump, boiler, or electric heating element.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Flow Control Portafitler","offer_id":68416768999645,"sku":"FLR-4F122000N","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/second_shot_plus_2026_shopify.jpg?v=1793760204"},{"product_id":"flair-58-plus-2-portafilter-baskets","title":"Flair 58 Plus 2 Portafilter Baskets","description":"\u003cp class=\"product-lead\"\u003eThe Flair 58 Plus 2 Portafilter Baskets are replacement and alternative-dose filter baskets designed exclusively for the Flair 58 and Flair 58 Plus 2 manual lever espresso makers. Two versions are available: a High Dose Basket and a Low Dose Basket, each tuned to a different extraction style and dose range.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Baskets, Two Extraction Approaches\u003c\/h2\u003e\n\u003cp\u003eThe High Dose Basket uses a straight-walled design that accommodates larger doses. Flair recommends starting at 18 grams, though the basket can accept more depending on bean density and roast level. The straight walls give the puck consistent lateral support across a wider dose range, which suits espresso drinkers who prefer to experiment with higher-ratio or more concentrated shots.\u003c\/p\u003e\n\n\u003ch2\u003eLow Dose Basket: Easier Dial-In\u003c\/h2\u003e\n\u003cp\u003eThe Low Dose Basket features chamfered edges and fewer exit holes than the High Dose version. Those chamfered edges funnel brew water through the grounds more evenly during extraction, and the reduced exit-hole count slows the flow enough that a coarser grind setting becomes workable. The Low Dose Basket has a recommended starting dose of 15 grams, with a wider margin for error during dial-in that is useful when switching beans or roast levels.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo basket geometries:\u003c\/strong\u003e straight-walled High Dose and chamfered-edge Low Dose, each optimized for its target dose range.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Dose starting point:\u003c\/strong\u003e 18 grams, with headroom for higher doses depending on bean and roast level.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow Dose starting point:\u003c\/strong\u003e 15 grams, with chamfered edges and fewer exit holes for easier dial-in and a coarser workable grind.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlair 58 \/ 58 Plus 2 exclusive:\u003c\/strong\u003e designed to fit the Flair 58 and Flair 58 Plus 2 portafilter only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eHigh Dose Basket (18 grams)\u003c\/th\u003e\n      \u003cth\u003eLow Dose Basket (15 grams)\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended starting dose\u003c\/td\u003e\n      \u003ctd\u003e18 g\u003c\/td\u003e\n      \u003ctd\u003e15 g\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWall design\u003c\/td\u003e\n      \u003ctd\u003eStraight-walled\u003c\/td\u003e\n      \u003ctd\u003eChamfered edges\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExit holes\u003c\/td\u003e\n      \u003ctd\u003eStandard\u003c\/td\u003e\n      \u003ctd\u003eFewer (restricted flow)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible machines\u003c\/td\u003e\n      \u003ctd\u003eFlair 58, Flair 58 Plus 2\u003c\/td\u003e\n      \u003ctd\u003eFlair 58, Flair 58 Plus 2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese baskets suit Flair 58 or Flair 58 Plus 2 owners who want to experiment with different dose ranges or extraction styles. The High Dose basket serves those pushing larger doses; the Low Dose basket serves those who prefer an easier dial-in process or a coarser grind setting.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese baskets are not compatible with any other Flair model, including the Flair PRO 2, PRO 3, 49 PRO, NEO, Classic, or 2GO. They are not suited to automatic or pump-driven espresso machines.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models do these baskets fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plus 2 Portafilter Baskets are designed for the Flair 58 and Flair 58 Plus 2 only. They are not compatible with other Flair models such as the PRO 2, PRO 3, 49 PRO, NEO, Classic, or 2GO.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the High Dose and Low Dose baskets?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe High Dose Basket has straight walls and is suited to doses starting at 18 grams, with room to go higher. The Low Dose Basket has chamfered edges and fewer exit holes, which funnel water through the grounds more evenly, allow a coarser grind, and make dial-in easier, with a recommended starting dose of 15 grams.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the Low Dose Basket accept more than 15 grams?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plus 2 Low Dose Basket is designed around a 15-gram starting dose. Both baskets can generally accept between 15 and 20 grams, though the Low Dose basket's geometry is optimized for the lower end of that range.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo these baskets work with automatic or pump espresso machines?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair 58 Plus 2 Portafilter Baskets are made for the Flair 58 and 58 Plus 2, which are manual lever espresso makers with no pump or boiler. These baskets are not designed for use with automatic or pump-driven espresso machines.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"High Dose Basket (18 grams)","offer_id":68416778633437,"sku":"FLR-35120037N","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Low Dose Basket (15 grams)","offer_id":68416778666205,"sku":"FLR-35120020N","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/58_plus_2_High_Dose_PF_shopify_1c64efe9-bd79-4c5e-bd5f-836c5.jpg?v=1793760274"},{"product_id":"flair-58-stainless-steel-joint-hook-upgrade","title":"Flair 58 Stainless Steel Joint Hook Upgrade Kit","description":"\u003cp class=\"product-lead\"\u003eThe Flair 58 Stainless Steel Joint Hook Upgrade Kit replaces the standard plastic joint hook on the Flair 58 and Flair 58 Plus 2 brew head with a stainless steel alternative, eliminating plastic contact between the brewing assembly and your espresso from start to finish.\u003c\/p\u003e\n\n\u003ch2\u003eA Fully Stainless Steel Brew Path\u003c\/h2\u003e\n\u003cp\u003eFor Flair 58 users who want no plastic in contact with their espresso during extraction, the joint hook is the one remaining plastic component in the brew head assembly. Swapping it for this stainless steel version completes the metal brew path, so every part of the system that touches your shot is steel from kettle to cup. The difference matters most to those who brew at high temperatures or who simply prefer to keep all food-contact surfaces free of plastic entirely.\u003c\/p\u003e\n\n\u003ch2\u003eStraightforward Installation\u003c\/h2\u003e\n\u003cp\u003eThe kit includes a replacement tool and a hex key sized for the installation, so no additional hardware is needed. Flair provides a dedicated installation video to walk through the process step by step, keeping the swap accessible even for those who have not previously disassembled the brew head.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel joint hook:\u003c\/strong\u003e replaces the standard plastic component for a fully metal brew head assembly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo-plastic brew path:\u003c\/strong\u003e eliminates plastic contact with espresso from kettle to cup on the Flair 58 and Flair 58 Plus 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes installation tools:\u003c\/strong\u003e comes with a replacement tool and a hex key\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation video available:\u003c\/strong\u003e Flair provides a dedicated step-by-step video guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.3 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible models\u003c\/td\u003e\n      \u003ctd\u003eFlair 58, Flair 58 Plus 2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded\u003c\/td\u003e\n      \u003ctd\u003eStainless steel joint hook, replacement tool, hex key\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis kit suits Flair 58 and Flair 58 Plus 2 owners who want to eliminate all plastic contact from their brew path and prefer a fully stainless steel brewing assembly.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis upgrade is not compatible with other Flair models, including the PRO 2, PRO 3, NEO, Classic, or 2GO, and does not add any functional brewing capability beyond removing plastic from the joint hook position.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this joint hook upgrade fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Stainless Steel Joint Hook Upgrade Kit is compatible with the Flair 58 and Flair 58 Plus 2. It is not designed for other models in the Flair lineup, including the PRO 2, PRO 3, NEO, Classic, or 2GO.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat tools are needed to install this upgrade?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo additional tools are required. The Flair 58 Stainless Steel Joint Hook Upgrade Kit includes a replacement tool and a hex key sized for the installation. Flair also provides a dedicated installation video to guide the process.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhy would someone upgrade to the stainless steel joint hook?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe stainless steel joint hook replaces the standard plastic component in the Flair 58 brew head, completing a fully metal brew path so no plastic comes into contact with espresso during extraction. It is intended for users who want to keep all food-contact surfaces free of plastic.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416785285341,"sku":"FLR-15121980N","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/Joint_Hook_White_Background_upgrade_kit.jpg?v=1793760307"},{"product_id":"flair-58-pressurized-basket","title":"Flair Espresso 58mm Pressurized Basket","description":"\u003cp class=\"product-lead\"\u003eThe Flair 58 Pressurized Basket is a 58mm portafilter basket designed for Flair Espresso's 58mm portafilter systems and compatible with other 58mm portafilters, allowing espresso extraction without a precision burr grinder or extensive grind dial-in.\u003c\/p\u003e\n\n\u003ch2\u003eForgiving Extraction Without the Grinder Tax\u003c\/h2\u003e\n\u003cp\u003eThe pressurized basket builds the back-pressure needed for espresso extraction internally, so the grind does not need to be dialed in to the same tolerance a standard single-wall basket demands. For Flair 58 or Flair 58 Plus 2 owners who are working with a general-purpose grinder rather than a dedicated espresso grinder, this basket removes one of the main variables standing between them and a usable shot.\u003c\/p\u003e\n\n\u003ch2\u003eFits the Portafilters You Already Have\u003c\/h2\u003e\n\u003cp\u003eThe Flair 58 Pressurized Basket seats in any 58mm portafilter from Flair Espresso and is also compatible with other 58mm portafilter systems. Owners upgrading an existing 58mm setup or replacing a worn basket can drop it in without additional hardware.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressurized design:\u003c\/strong\u003e generates extraction pressure internally, reducing grind-precision requirements\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e58mm fit:\u003c\/strong\u003e compatible with Flair Espresso 58mm portafilters and other 58mm portafilter systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual use:\u003c\/strong\u003e serves as a replacement part or as an upgrade to an existing 58mm portafilter setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBasket diameter\u003c\/td\u003e\n      \u003ctd\u003e58mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.3 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility\u003c\/td\u003e\n      \u003ctd\u003eFlair Espresso 58mm portafilters; other 58mm portafilter systems\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair 58 Pressurized Basket suits Flair 58 and Flair 58 Plus 2 owners who want to pull shots with a general-purpose grinder, as well as anyone with a compatible 58mm portafilter system who wants a more forgiving basket for everyday use or as a replacement.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis basket is not a standard single-wall basket and is not intended for users who are already dialing in with an espresso-capable burr grinder and want maximum extraction control through grind precision alone.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this basket fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Pressurized Basket is designed for Flair Espresso's 58mm portafilter systems, which includes the Flair 58 and Flair 58 Plus 2. It is also compatible with other 58mm portafilters outside the Flair lineup.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I need a special grinder to use this basket?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair 58 Pressurized Basket is specifically designed to generate extraction pressure without requiring an espresso-capable burr grinder or extensive grind dial-in, making it a practical option for users working with a general-purpose grinder.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I use this basket as a direct replacement for my existing 58mm basket?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair 58 Pressurized Basket can be purchased as a replacement part for a worn or lost basket, or as an upgrade to an existing 58mm portafilter setup where a more forgiving extraction is the priority.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416797049053,"sku":"FLR-35120044N","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/flair_58_plus_2_Pressurized_PF_shopify.jpg?v=1793760340"},{"product_id":"flair-analog-milk-steaming-thermometer","title":"Flair Espresso Analog Milk Steaming Thermometer","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Analog Milk Steaming Thermometer is a waterproof, stainless steel probe thermometer designed for home baristas steaming milk for espresso drinks. Its dual-scale dial reads in both Fahrenheit and Celsius and includes a clearly marked target steaming range, so you can consistently hit the temperature needed for silky microfoam without guesswork.\u003c\/p\u003e\n\n\u003ch2\u003eRead Temperature at a Glance\u003c\/h2\u003e\n\u003cp\u003eThe Flair Analog Milk Steaming Thermometer's dual-scale display shows Fahrenheit and Celsius simultaneously, and a dedicated target steaming zone is marked directly on the dial face. Rather than memorizing a number or consulting a chart mid-steam, you can watch the needle approach the marked range and stop at the right moment. That visual cue makes the difference between dense, scalded milk and the smooth, glossy microfoam that pours cleanly into latte art.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Daily Milk Work\u003c\/h2\u003e\n\u003cp\u003eThe stainless steel probe resists corrosion and wipes clean quickly, and the waterproof construction means a rinse under the tap after each session is all the maintenance required. The slim profile fits naturally inside the Flair Milk Pitcher, sitting at the correct depth without getting in the way of the steaming wand or stovetop steamer. Consistent probe placement leads to consistent readings, which is the foundation of repeatable milk texture across cortados, cappuccinos, and lattes.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-scale dial (°F and °C):\u003c\/strong\u003e read your steaming temperature in either unit without conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarked target steaming range:\u003c\/strong\u003e clearly indicated zone on the dial for ideal microfoam temperature\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel probe:\u003c\/strong\u003e durable, hygienic, and easy to clean between uses\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWaterproof construction:\u003c\/strong\u003e withstands daily use and quick rinse-downs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlim profile:\u003c\/strong\u003e sized to pair with the Flair Milk Pitcher and Wizard Stovetop Steamer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDisplay\u003c\/td\u003e\n      \u003ctd\u003eAnalog dial, dual scale (°F and °C)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe material\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConstruction\u003c\/td\u003e\n      \u003ctd\u003eWaterproof\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair Analog Milk Steaming Thermometer suits home baristas who steam milk with a stovetop steamer or manual wand and want a reliable, low-cost way to monitor temperature for lattes, cappuccinos, cortados, and similar drinks. It works particularly well alongside the Flair Milk Pitcher and Wizard Stovetop Steamer.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis thermometer does not connect to an app or display a digital readout, and it does not include a timer or any electronic components. It is not intended as a standalone brewing or steaming device.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the thermometer display both Fahrenheit and Celsius at the same time?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair Analog Milk Steaming Thermometer features a dual-scale dial that shows both Fahrenheit and Celsius simultaneously on the same face, so you can read whichever unit you prefer without any conversion.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the target steaming temperature range marked on the dial?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Flair Analog Milk Steaming Thermometer has a clearly marked target steaming range on the dial face, giving you a visual reference for the temperature zone associated with smooth, silky microfoam.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this thermometer be rinsed or submerged for cleaning?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Analog Milk Steaming Thermometer is waterproof, so a quick rinse under the tap after each use is sufficient for cleaning. The stainless steel probe is also hygienic and easy to wipe down.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair products is this thermometer designed to pair with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Analog Milk Steaming Thermometer is sized and shaped to work alongside the Flair Milk Pitcher and the Wizard Stovetop Steamer. Its slim profile fits naturally inside the pitcher during steaming.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416802554077,"sku":"FLR-6X119420N","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/Analog_Thermometer_3_woo_optimized_6a44d96f-a962-4d35-87b7-0.jpg?v=1793760377"},{"product_id":"flair-digital-milk-steaming-thermometer","title":"Flair Espresso Digital Milk Steaming Thermometer","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Digital Milk Steaming Thermometer is a water-resistant digital probe thermometer designed for home baristas and espresso enthusiasts who steam milk manually. It reads up to 100°C, displays in both Fahrenheit and Celsius, and is built to pair with the Flair Milk Pitcher and Wizard Steamer.\u003c\/p\u003e\n\n\u003ch2\u003eRead Temperature at a Glance\u003c\/h2\u003e\n\u003cp\u003eThe Flair Digital Milk Steaming Thermometer features a large touchscreen display that shows the current temperature clearly, even in a busy home coffee station. Because milk texture depends on hitting a narrow temperature window, being able to read the dial instantly, without squinting at a needle, makes the difference between silky microfoam and overheated milk. The water-resistant housing means splashes during steaming do not affect the display or the electronics.\u003c\/p\u003e\n\n\u003ch2\u003eAccurate Readings From a Food-Safe Probe\u003c\/h2\u003e\n\u003cp\u003eThe stainless steel probe is food-safe and responds quickly, so the temperature shown reflects what is actually happening in the pitcher rather than lagging behind. The thermometer measures up to 100°C and switches between Fahrenheit and Celsius at a touch, so it works equally well whether a recipe calls out a Celsius target or a barista thinks in Fahrenheit. Consistent, repeatable readings let a home barista dial in a preferred steaming temperature and hit it reliably every session.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned to Work With Flair Gear\u003c\/h2\u003e\n\u003cp\u003eThe thermometer is designed to work with the Flair Milk Pitcher and the Wizard Steamer, so it integrates naturally into a Flair-based home espresso setup. Using matched tools reduces guesswork: the probe fits the pitcher, the display is readable during a steam cycle, and the result is more consistent milk texture across lattes, cappuccinos, and other milk-based drinks.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital touchscreen display:\u003c\/strong\u003e large, water-resistant screen for fast, clear temperature readings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel probe:\u003c\/strong\u003e food-safe material with fast response time\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-unit display:\u003c\/strong\u003e switch between Fahrenheit and Celsius at a touch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide range:\u003c\/strong\u003e measures up to 100°C, covering all milk-based espresso drinks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWater-resistant housing:\u003c\/strong\u003e built for daily use at a home coffee station\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlair Gear compatible:\u003c\/strong\u003e designed to pair with the Flair Milk Pitcher and Wizard Steamer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum temperature range\u003c\/td\u003e\n      \u003ctd\u003e100°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTemperature units\u003c\/td\u003e\n      \u003ctd\u003eFahrenheit and Celsius (switchable)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProbe material\u003c\/td\u003e\n      \u003ctd\u003eStainless steel (food-safe)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDisplay type\u003c\/td\u003e\n      \u003ctd\u003eDigital touchscreen\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHousing\u003c\/td\u003e\n      \u003ctd\u003eWater-resistant\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible accessories\u003c\/td\u003e\n      \u003ctd\u003eFlair Milk Pitcher, Wizard Steamer\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flair Digital Milk Steaming Thermometer suits home baristas who steam milk manually and want a reliable, readable way to monitor temperature when making lattes, cappuccinos, or other milk-based espresso drinks. It is a natural companion to the Flair Milk Pitcher and Wizard Steamer.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis thermometer is not a substitute for a steaming wand or milk steamer, and it does not automate the steaming process. It is a monitoring tool only. Buyers who need a steaming device should look at the Wizard or eWizard Steamer separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat temperature range does this thermometer cover?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Digital Milk Steaming Thermometer measures up to 100°C, which covers the full range used for steaming milk for lattes, cappuccinos, and other espresso-based drinks. Both Fahrenheit and Celsius modes are available and can be switched at a touch.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the probe safe to use in milk?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The probe on the Flair Digital Milk Steaming Thermometer is made from food-safe stainless steel, making it suitable for direct contact with milk during steaming.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the thermometer work with the Flair Wizard Steamer?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Digital Milk Steaming Thermometer is designed to work with both the Flair Milk Pitcher and the Wizard Steamer, making it a natural addition to a Flair home espresso setup.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the thermometer get wet during use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Digital Milk Steaming Thermometer has a water-resistant housing and a water-resistant touchscreen display, so everyday splashes at a home coffee station will not damage it.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416817266909,"sku":"FLR-6X119413N","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/Digital_Thermometer_woo_optimized_fd7eeece-5489-4d75-ae0f-2a.jpg?v=1793760418"},{"product_id":"flair-58-stem-guider","title":"Flair Espresso 58 Stem Guider Replacement Part","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso 58 Stem Guider is a replacement part for pre-2023 Flair 58 and Flair 58x manual lever espresso makers equipped with the valve plunger. It attaches to the lever hook and is designed to maintain proper alignment of the lever hook and valve plunger as they descend into the brewing cylinder during extractions.\u003c\/p\u003e\n\n\u003ch2\u003eConsistent Alignment During Extraction\u003c\/h2\u003e\n\u003cp\u003eDuring a manual lever pull on the Flair 58 or 58x, the lever hook and valve plunger must travel in precise alignment into the brewing cylinder. The Stem Guider keeps these components on the correct path throughout the stroke, reducing the chance of misalignment that can affect extraction consistency or cause uneven wear on the plunger assembly over time.\u003c\/p\u003e\n\n\u003ch2\u003eA Direct Replacement When You Need It\u003c\/h2\u003e\n\u003cp\u003eIf the Stem Guider on your pre-2023 Flair 58 or Flair 58x has worn or gone missing, this replacement restores the machine to its intended operating condition. Replacing a small alignment component is far less disruptive than troubleshooting extraction inconsistency without one.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLever hook attachment:\u003c\/strong\u003e mounts directly to the lever hook of compatible Flair 58 and 58x brew heads\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlignment function:\u003c\/strong\u003e guides the lever hook and valve plunger into the brewing cylinder in proper alignment during each extraction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility-specific design:\u003c\/strong\u003e engineered for pre-May 2023 Flair 58 and Flair 58x units equipped with the valve plunger\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Models\u003c\/td\u003e\n      \u003ctd\u003eFlair 58 and Flair 58x (pre-May 2023, valve plunger equipped)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAttachment Point\u003c\/td\u003e\n      \u003ctd\u003eLever hook\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.02 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis part is for owners of a Flair 58 or Flair 58x purchased before May 2023 whose machine uses the valve plunger and needs a replacement Stem Guider to restore proper lever and plunger alignment.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Flair 58 Stem Guider is not compatible with Flair 58 or Flair 58x units purchased after May 2023, and it does not fit any other Flair model, including the Flair 49 PRO, PRO 2, PRO 3, Classic, NEO, 2GO, or Signature.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I know if my Flair 58 or 58x is compatible with this Stem Guider?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Stem Guider fits Flair 58 and Flair 58x machines purchased before May 2023 that are equipped with the valve plunger. Flair 58 and 58x units purchased after May 2023 use a different design and are not compatible with this part.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhere does the Stem Guider attach on the Flair 58?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Stem Guider attaches to the lever hook of the brew head. From that position it guides the lever hook and valve plunger into proper alignment as they descend into the brewing cylinder during an extraction.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the Stem Guider actually do during a pull?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eDuring a lever pull on the Flair 58 or 58x, the Stem Guider maintains correct alignment between the lever hook and the valve plunger as both components travel down into the brewing cylinder, helping to keep the extraction path consistent and reducing stress on the plunger assembly.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416826081501,"sku":"FLR-75220126B","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-stem-guider-woo-2022.jpg?v=1793760449"},{"product_id":"flair-58-plus-2-base-upgrade-kit","title":"Flair 58 Plus 2 Base Upgrade Kit","description":"\u003cp class=\"product-lead\"\u003eThe Flair 58 Plus 2 Base Upgrade Kit replaces the base unit on a compatible Flair 58+ or Flair 58 \/ 58x (purchased after July 2023) with the integrated preheat controller and downsized power supply introduced on the 58 Plus 2, bringing cleaner wire management and a more streamlined countertop footprint to an existing manual lever espresso setup.\u003c\/p\u003e\n\n\u003ch2\u003eIntegrated Preheat Control in a Cleaner Package\u003c\/h2\u003e\n\u003cp\u003eThe new base houses Flair's preheat controller directly inside the unit rather than as a separate inline component. Three preset temperatures (85°C, 90°C, and 95°C) correspond to brew targets for dark, medium, and light roasted coffees respectively, so dialing in preheat no longer requires guesswork or a separate device sitting on the counter.\u003c\/p\u003e\n\n\u003ch2\u003eSimplified Wiring, Tidier Counter\u003c\/h2\u003e\n\u003cp\u003eThe kit includes a downsized power supply and a wire guide designed to route the cable cleanly along the base. Compared to the earlier 58+ wiring arrangement, the result is significantly less cable clutter and a setup that looks closer to a single integrated machine than a modular assembly.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated preheat controller:\u003c\/strong\u003e three selectable temperatures (85°C \/ 90°C \/ 95°C) built into the base\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDownsized power supply:\u003c\/strong\u003e smaller footprint than the original 58+ supply, with U.S. plug included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire guide included:\u003c\/strong\u003e routes cabling neatly along the base for cleaner wire management\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick-disconnect compatible:\u003c\/strong\u003e designed for the quick-disconnect brew head on qualifying Flair 58-series machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eKit weight\u003c\/td\u003e\n      \u003ctd\u003e4 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePreheat temperature settings\u003c\/td\u003e\n      \u003ctd\u003e85°C, 90°C, 95°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower supply plug\u003c\/td\u003e\n      \u003ctd\u003eU.S. plug\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWhat is included\u003c\/td\u003e\n      \u003ctd\u003eFlair 58 Plus 2 Base with Integrated Preheat Controller, Wire Guide, Flair 58 Plus 2 Power Supply (U.S. plug)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility\u003c\/td\u003e\n      \u003ctd\u003eFlair 58+ and Flair 58 \/ 58x with quick-disconnect brew head, purchased after July 2023\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis kit suits owners of a Flair 58+ or a Flair 58 \/ 58x purchased after July 2023 who want the cleaner integrated base and preheat controller introduced on the 58 Plus 2 without replacing the entire machine. It is particularly useful for anyone frustrated by the cable management of the original 58+ base.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit is not compatible with Flair 58 or 58x machines purchased before July 2023, as those models do not have the required quick-disconnect brew head. It does not include a brew head, portafilter, or any other brewing components; it replaces the base only.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich machines is this kit compatible with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plus 2 Base Upgrade Kit is compatible only with the Flair 58+ and with Flair 58 and 58x machines that were purchased after July 2023. Compatibility depends on the quick-disconnect brew head; machines purchased before that date use a different connection and are not supported by this kit.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat preheat temperatures does the integrated controller offer?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe integrated preheat controller in the Flair 58 Plus 2 base provides three preset settings: 85°C for dark roasts, 90°C for medium roasts, and 95°C for light roasts. These presets are the same three settings found on the full Flair 58 Plus 2 machine.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this kit include a brew head or portafilter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair 58 Plus 2 Base Upgrade Kit includes only the base with integrated preheat controller, a wire guide, and the power supply with U.S. plug. No brew head, portafilter, or other brewing components are included; the kit is a base replacement only.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat power supply is included, and does it work outside the U.S.?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe kit includes the Flair 58 Plus 2 power supply with a U.S. plug. International voltage compatibility is not specified for this kit, so buyers outside the U.S. should confirm whether an adapter or alternative supply is needed before purchasing.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416838500573,"sku":"FLR-05117082B","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-flair-58-plus-2-base-upgrade-kit-woo.jpg?v=1793760512"},{"product_id":"flair-royal-grinder-tool-steel-burr-retainer","title":"Flair Royal Grinder Tool Steel Burr and Burr Retainer Upgrade","description":"\u003cp class=\"product-lead\"\u003eThe Flair Royal Grinder Tool Steel Burr and Burr Retainer is a replacement upgrade set designed for Royal Grinders purchased before 2021, replacing the original burr with a tool steel burr and stainless steel retainer that grinds faster and more aggressively, reducing the time and number of rotations needed to reach your target grind.\u003c\/p\u003e\n\n\u003ch2\u003eFaster Grinding Action\u003c\/h2\u003e\n\u003cp\u003eThe tool steel burr in this upgrade set cuts approximately twice as fast as the original Royal Grinder burr, meaning fewer rotations and less time between you and your shot. For anyone who found the original burr slow on darker or denser roasts, this is a direct mechanical improvement to throughput.\u003c\/p\u003e\n\n\u003ch2\u003eWhat to Expect After the Upgrade\u003c\/h2\u003e\n\u003cp\u003eBecause the tool steel burr grinds more aggressively, it requires noticeably more force than the first-generation burr. This is a normal characteristic of the faster geometry, not a fit or installation issue. Buyers should expect a firmer grinding feel compared to the burr they are replacing.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool steel burr:\u003c\/strong\u003e faster, more aggressive cutting action than the original Royal Grinder burr\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel burr retainer:\u003c\/strong\u003e included alongside the burr as a complete upgrade set\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduced grind time:\u003c\/strong\u003e fewer rotations required to reach target grind size\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-2021 Royal Grinder compatibility:\u003c\/strong\u003e designed specifically for Royal Grinders sold before 2021\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBurr material\u003c\/td\u003e\n      \u003ctd\u003eTool steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRetainer material\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible grinder\u003c\/td\u003e\n      \u003ctd\u003eFlair Royal Grinder (purchased before 2021)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWhat is included\u003c\/td\u003e\n      \u003ctd\u003eTool steel burr, stainless steel burr retainer\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis upgrade set is for owners of a Flair Royal Grinder purchased before 2021 who want faster grinding action and are willing to apply more force per rotation in exchange for fewer rotations overall.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis set is not compatible with Royal Grinders purchased in the US in 2021 or later, which already ship with this tool steel burr and retainer as standard equipment. It is not designed for any other Flair grinder model.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I know if my Royal Grinder needs this upgrade?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Royal Grinder Tool Steel Burr upgrade is intended for Royal Grinders purchased before 2021. Royal Grinders sold in the US from 2021 onward already include this tool steel burr and stainless steel retainer as standard, so those owners do not need this set.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the upgraded burr feel different to use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The tool steel burr in this upgrade set requires more hand force than the original Royal Grinder burr because it grinds approximately twice as fast. The increased resistance is a normal result of the more aggressive burr geometry, not a sign of incorrect installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in this set?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Royal Grinder Tool Steel Burr and Burr Retainer set includes one tool steel burr and one stainless steel burr retainer. Both components are required for the upgrade and are supplied together in a single purchase.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416840270045,"sku":"FLR-1G210219N","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-royal-burr-and-retainer-image-square-side.jpg?v=1793760545"},{"product_id":"flair-royal-stainless-steel-burr-retainer","title":"Flair Royal Stainless Steel Burr Retainer","description":"\u003cp class=\"product-lead\"\u003eThe Flair Royal Stainless Steel Burr Retainer is a direct replacement for the original polyacetal burr retainer fitted to Flair Royal grinders purchased before 2021, designed to improve grind performance and extend the service life of the grinder. Royal grinders purchased in 2021 or later already include this stainless steel retainer as standard.\u003c\/p\u003e\n\n\u003ch2\u003eA More Durable Foundation for Your Burrs\u003c\/h2\u003e\n\u003cp\u003eThe original polyacetal burr retainer in pre-2021 Royal grinders is a functional plastic component, but stainless steel holds tighter tolerances under the repeated torque of grinding and resists wear over a longer service life. Replacing it with the stainless steel version gives the burr a more stable seat, which contributes to more consistent grind output over time.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e replaces the original polyacetal retainer for improved durability and longevity\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect fit for pre-2021 Royal grinders:\u003c\/strong\u003e a drop-in upgrade requiring no modification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImproved grind performance:\u003c\/strong\u003e more stable burr seating compared to the original plastic retainer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible grinder\u003c\/td\u003e\n      \u003ctd\u003eFlair Royal (purchased before 2021)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReplaces\u003c\/td\u003e\n      \u003ctd\u003eOriginal polyacetal burr retainer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis retainer is for owners of a Flair Royal hand grinder purchased before 2021 who want to upgrade from the original plastic burr retainer to a more durable stainless steel component.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis retainer is not needed for Royal grinders purchased in 2021 or later, which already include the stainless steel retainer as standard. It is not compatible with other Flair grinder models.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I know if my Royal grinder needs this upgrade?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Royal Stainless Steel Burr Retainer is intended for Royal grinders purchased before 2021. Grinders purchased in 2021 or later already include the stainless steel retainer as standard equipment and do not require this part.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does this retainer replace?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Royal Stainless Steel Burr Retainer replaces the original polyacetal (plastic) burr retainer. Stainless steel holds tighter tolerances under repeated grinding torque and is more resistant to long-term wear than the original plastic component.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this fit other Flair grinder models?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis retainer is designed specifically for the Flair Royal hand grinder. Flair lists it for the Royal only, so do not assume it fits another grinder.\u003c\/p\u003e\n\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416847446237,"sku":"FLR-1G210134N","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-burr-retainer-front-woo.jpg?v=1793760572"},{"product_id":"flair-espresso-piston-replacement-part","title":"Flair Espresso Piston Replacement Part","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Piston is a replacement piston for Flair manual lever espresso makers, constructed from the same high-quality engineering resin used in the Flair portafilter, with a hardened stainless steel top.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt From the Same Materials as the Original\u003c\/h2\u003e\n\u003cp\u003eThe Flair Piston uses the same high-quality engineering resin as the Flair portafilter itself, meaning the replacement part meets the same material standard as the component it was designed to work alongside. The hardened stainless steel top adds durability at the point of greatest contact pressure during the lever pull.\u003c\/p\u003e\n\n\u003ch2\u003eA Practical Spare for an Essential Component\u003c\/h2\u003e\n\u003cp\u003eThe piston is a small but essential part of the Flair brew head assembly. Under normal use, the piston does not require replacement. Flair makes this replacement available for situations where the original has been lost or misplaced. Having a spare on hand means a misplaced piston does not interrupt your daily routine.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngineering resin construction:\u003c\/strong\u003e same material grade used in the Flair portafilter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardened stainless steel top:\u003c\/strong\u003e durable contact surface at the pressure point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect replacement:\u003c\/strong\u003e designed to restore the brew head to full working order\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterials\u003c\/td\u003e\n      \u003ctd\u003eEngineering resin body, hardened stainless steel top\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis piston is for Flair manual lever espresso maker owners who have lost or misplaced their original piston and need a direct replacement to restore their brew head to working order.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis part is not a wear item and is not intended as a routine maintenance replacement under normal use. Model compatibility is not confirmed in the product listing; contact CoffeeRoast Co. before ordering to confirm this part fits your specific Flair model.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the Flair Piston made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Piston is constructed from the same high-quality engineering resin used in the Flair portafilter, with a hardened stainless steel top at the pressure contact point.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhen would I need to replace the Flair Piston?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Piston is not a routine wear item. This replacement is available primarily for cases where the original piston has been lost or misplaced rather than damaged through normal use.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow do I confirm this piston fits my Flair model?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eModel compatibility is not confirmed in the product listing. Contact CoffeeRoast Co. before ordering to verify this piston fits your specific Flair espresso maker.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416848986333,"sku":"FLR-2X791727N","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-7c3a15-e39d331586234fc5a859e526ac575c36-mv2-2.jpg?v=1793760617"},{"product_id":"flair-espresso-o-ring-set-pro-pro2-pro3-6-pack","title":"Flair Espresso O-ring Set for PRO, PRO 2 and PRO 3 (6 O-rings)","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso O-ring Set is a six-piece replacement kit compatible with the Flair PRO, PRO 2, and PRO 3 brew heads only. It covers every o-ring position in the PRO brew head assembly, keeping seals fresh and pressure consistent across the cylinder, stem, plunger, and pressure gauge.\u003c\/p\u003e\n\n\u003ch2\u003eKeep Your PRO Brew Head Sealed and Performing\u003c\/h2\u003e\n\u003cp\u003eWorn or damaged o-rings are among the most common causes of pressure loss and inconsistent espresso on a manual lever machine. Replacing them on a regular maintenance cycle, or at the first sign of leaking, restores the tight seal the PRO brew head relies on to build and hold pressure through the lever stroke. Because this set covers all six positions at once, a single kit is enough for a full rebuild rather than a partial fix.\u003c\/p\u003e\n\n\u003ch2\u003eEvery Position in the Assembly, One Kit\u003c\/h2\u003e\n\u003cp\u003eThe set includes one o-ring for the brew cylinder, one for the stem, two for the plunger, and two for the pressure gauge: the complete complement for the PRO brew head. Having the full set on hand means a maintenance session does not stall waiting for a missing piece.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix o-rings per set:\u003c\/strong\u003e covers all sealing positions in the PRO brew head assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrew cylinder o-ring (x1):\u003c\/strong\u003e seals the cylinder body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStem o-ring (x1):\u003c\/strong\u003e seals the stem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlunger o-rings (x2):\u003c\/strong\u003e seals the plunger at both positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure gauge o-rings (x2):\u003c\/strong\u003e seals the gauge fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible models\u003c\/td\u003e\n\u003ctd\u003eFlair PRO, PRO 2, PRO 3 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e6 o-rings per set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContents\u003c\/td\u003e\n\u003ctd\u003e1x brew cylinder o-ring, 1x stem o-ring, 2x plunger o-rings, 2x pressure gauge o-rings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis set is for owners of the Flair PRO, PRO 2, or PRO 3 who are performing routine brew head maintenance or replacing o-rings that show wear, deformation, or leaking.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis o-ring set is not compatible with other Flair models, including the Flair 58, 58 Plus 2, 49 PRO, Classic, NEO, 2GO, or Signature. It does not include o-rings for any component outside the PRO brew head assembly.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this o-ring set fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Espresso O-ring Set is compatible with the Flair PRO, PRO 2, and PRO 3 only. It is not designed for the Flair 58, 58 Plus 2, 49 PRO, Classic, NEO, 2GO, or Signature brew heads, which use different seal specifications.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many o-rings are included and where do they go?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach set contains six o-rings: one for the brew cylinder, one for the stem, two for the plunger, and two for the pressure gauge. Together these cover every sealing position in the Flair PRO brew head assembly.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhen should the o-rings on a Flair PRO brew head be replaced?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eO-rings on the Flair PRO brew head should be inspected regularly and replaced when they show visible wear, deformation, or cracking, or when the brew head begins leaking during the lever stroke. Keeping a spare set on hand allows for immediate replacement without interrupting your routine.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416853835997,"sku":"FLR-4P822616R","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-standard-replacement-o-rings-wide.jpg?v=1793760677"},{"product_id":"flair-espresso-pro-plunger-stem","title":"Flair Espresso PRO Plunger Stem","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso PRO Plunger Stem is a replacement component that inserts into the PRO Stainless Steel Plunger for use with the Signature PRO manual lever espresso maker. It is compatible with the Signature PRO only and does not include a pressure gauge.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Part Does\u003c\/h2\u003e\n\u003cp\u003eThe PRO Plunger Stem is the inner shaft that seats inside the PRO Stainless Steel Plunger assembly on the Signature PRO. Replacing a worn or damaged stem restores the plunger assembly to full working condition without requiring a complete brew head replacement, keeping the Signature PRO in service longer.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility and What Is Included\u003c\/h2\u003e\n\u003cp\u003eThe PRO Plunger Stem fits the Signature PRO exclusively. It is not compatible with other Flair models. The stem ships without a pressure gauge; if a gauge is needed, it must be sourced separately.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect fit:\u003c\/strong\u003e inserts into the PRO Stainless Steel Plunger on the Signature PRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplacement part:\u003c\/strong\u003e restores the plunger assembly without a full brew head swap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGauge not included:\u003c\/strong\u003e ships as the stem only, no pressure gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Model\u003c\/td\u003e\n      \u003ctd\u003eSignature PRO\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePressure Gauge Included\u003c\/td\u003e\n      \u003ctd\u003eNo\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe PRO Plunger Stem is for Signature PRO owners who need to replace the stem component of their PRO Stainless Steel Plunger assembly.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe PRO Plunger Stem is not compatible with any other Flair model and does not include a pressure gauge.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does the PRO Plunger Stem fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Espresso PRO Plunger Stem is compatible with the Signature PRO only. It is not designed for use with other Flair espresso maker models.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the PRO Plunger Stem include a pressure gauge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair Espresso PRO Plunger Stem ships as the stem component only. A pressure gauge is not included and would need to be purchased separately if required.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the PRO Plunger Stem connect to?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe PRO Plunger Stem inserts into the PRO Stainless Steel Plunger on the Signature PRO manual lever espresso maker, forming part of the plunger assembly used during brewing.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416860160221,"sku":"FLR-2P822562U","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-7c3a15-4ef9be20f28f4aa3880d3fb188f32f7c-mv2-d-2541-1699-s-sq.jpg?v=1793760703"},{"product_id":"flair-espresso-filling-funnel-pro-pro-2","title":"Flair Espresso Filling Funnel for PRO and PRO 2","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Filling Funnel is a dosing accessory for the Flair PRO and PRO 2 portafilters, designed to guide ground coffee cleanly into the basket without spillage or mess.\u003c\/p\u003e\n\n\u003ch2\u003eCleaner Dosing, Every Pull\u003c\/h2\u003e\n\u003cp\u003eGrinding directly into a portafilter basket is a reliable workflow, but loose grounds on the rim or collar can disrupt distribution and make a mess of your prep surface. The Flair Espresso Filling Funnel sits over the PRO and PRO 2 portafilter to funnel grounds straight into the basket, keeping your prep area clean and your dose where it belongs.\u003c\/p\u003e\n\n\u003ch2\u003eA Simple Tool That Earns Its Place\u003c\/h2\u003e\n\u003cp\u003eSmall accessories that remove friction from a repeatable process are worth having. The Filling Funnel is a low-cost addition to a PRO or PRO 2 workflow that makes consistent dosing easier to maintain shot after shot, without adding steps or complexity.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTargeted compatibility:\u003c\/strong\u003e fits the Flair PRO and PRO 2 portafilters only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMess reduction:\u003c\/strong\u003e channels ground coffee cleanly into the basket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e 0.1 lb, easy to store alongside your portafilter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Models\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO, Flair PRO 2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis funnel suits Flair PRO and PRO 2 owners who want a cleaner, more consistent dosing process when loading ground coffee into the portafilter basket.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis funnel is not compatible with other Flair models, including the Flair 58, 58 Plus 2, 49 PRO, Classic, NEO, 2GO, or Signature. It is a dosing aid only and does not modify brewing pressure, temperature, or extraction.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this filling funnel fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Espresso Filling Funnel is compatible with the Flair PRO and Flair PRO 2 portafilters only. It is not designed for the Flair 58, 58 Plus 2, 49 PRO, Classic, NEO, 2GO, or Signature models.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the filling funnel actually do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO and PRO 2 Filling Funnel sits over the portafilter basket and guides ground coffee cleanly into it, reducing spillage onto the rim or prep surface during the dosing step.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this funnel change how the espresso is brewed?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair Espresso Filling Funnel is a dosing aid used before brewing. It has no effect on pressure, temperature, or extraction once the portafilter is assembled and the lever pull begins.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416861307101,"sku":"FLR-7P822531B","price":5.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-7c3a15-aace82840990415e85fb65c5123c87f9-mv2-d-3463-2308-s-sq.jpg?v=1793760734"},{"product_id":"flair-pro-dosing-cup-tamper","title":"Flair PRO Dosing Cup and Tamper","description":"\u003cp class=\"product-lead\"\u003eThe Flair PRO Dosing Cup and Tamper is a two-in-one accessory for the Flair PRO and PRO 2, combining a pre-grind measuring cup with a tamper sized to fit the PRO portafilter basket.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Steps, One Tool\u003c\/h2\u003e\n\u003cp\u003eThe PRO Dosing Cup and Tamper handles the two manual steps that bookend your grind. Before grinding, the cup holds your measured beans so you can dose directly into your grinder without a separate vessel. After grinding, the same tool flips to function as a tamper, pressing the grounds evenly into the PRO portafilter basket. Keeping both functions in one piece means fewer items on the counter and one less thing to misplace during a pull.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for the PRO Workflow\u003c\/h2\u003e\n\u003cp\u003eThe PRO Dosing Cup and Tamper is sized specifically for the Flair PRO and PRO 2 portafilter. That precise fit matters for tamping: a tamper that matches the basket diameter seats evenly across the puck, which helps produce consistent extraction shot to shot. Because it is designed around the PRO brew head geometry, it is not interchangeable with other Flair models.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo-in-one design:\u003c\/strong\u003e functions as a dosing cup before grinding and a tamper after\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO and PRO 2 compatible:\u003c\/strong\u003e sized specifically for the Flair PRO and PRO 2 portafilter basket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStreamlined workflow:\u003c\/strong\u003e measure, grind, and tamp with a single accessory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Models\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO, Flair PRO 2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFunctions\u003c\/td\u003e\n      \u003ctd\u003eDosing cup (pre-grind) and tamper (post-grind)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe PRO Dosing Cup and Tamper suits Flair PRO and PRO 2 owners who want to simplify their workflow by combining the dosing and tamping steps into one compact tool.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis accessory is not compatible with other Flair models, including the Flair Classic, NEO, 2GO, 49 PRO, PRO 3, or 58 series. It is not a standalone grinder or a precision scale.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this dosing cup and tamper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO Dosing Cup and Tamper is compatible with the Flair PRO and Flair PRO 2 only. It is not designed to fit the Flair Classic, NEO, 2GO, 49 PRO, PRO 3, or 58 series portafilter baskets.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow does the two-in-one function work?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe PRO Dosing Cup and Tamper serves as a measuring cup first: you load your whole beans into it before grinding. After grinding into the portafilter, the same tool is used as a tamper to press the grounds evenly into the PRO basket before pulling your shot.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this replace a separate tamper for the Flair PRO?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eFor Flair PRO and PRO 2 users, the PRO Dosing Cup and Tamper can serve as the primary tamper, since it is sized to match the PRO portafilter basket. Whether it fully replaces a dedicated tamper depends on your preference for tamping feel and pressure feedback.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416864616669,"sku":"FLR-7P822524B","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-7c3a15-dc351562de254de2a42861f4105c9080-mv2-d-3641-2427-s-sq.jpg?v=1793760768"},{"product_id":"flair-pro-preheat-cap","title":"Flair PRO Preheat Cap","description":"\u003cp class=\"product-lead\"\u003eThe Flair PRO Preheat Cap is a silicone cap designed for the Flair PRO and PRO 2 espresso makers, serving two purposes: preheating the portafilter before pulling a shot, and acting as a stable pad when filling and tamping the portafilter basket.\u003c\/p\u003e\n\n\u003ch2\u003eWhy It Matters\u003c\/h2\u003e\n\n\u003cp\u003ePreheating the portafilter is one of the most effective steps a manual espresso maker can take to improve shot consistency. A cold portafilter draws heat away from the puck during extraction, which can flatten flavor and reduce body. The Flair PRO Preheat Cap lets the portafilter sit over a hot water vessel to absorb heat before brewing, so the brew head stays at temperature from the first drop.\u003c\/p\u003e\n\n\u003cp\u003eThe PRO Preheat Cap also doubles as a tamping pad. Placing the cap on a flat surface and resting the portafilter on it holds the basket steady and protects the silicone seal while distributing and tamping the dose, keeping the workflow tidy and the components protected.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual function:\u003c\/strong\u003e preheats the portafilter and serves as a filling and tamping pad\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone construction:\u003c\/strong\u003e heat-tolerant material suited to contact with hot water vessels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise fit:\u003c\/strong\u003e designed specifically for the Flair PRO and PRO 2 portafilter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSilicone\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Models\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO, Flair PRO 2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\n\u003cp class=\"product-fit-yes\"\u003eThe Flair PRO Preheat Cap suits Flair PRO and PRO 2 owners who want to improve shot temperature stability through portafilter preheating, or who want a dedicated pad for filling and tamping their portafilter basket.\u003c\/p\u003e\n\n\u003cp class=\"product-fit-no\"\u003eThe PRO Preheat Cap is not compatible with other Flair models, including the Flair 58, Flair 58 Plus 2, Flair 49 PRO, Flair Classic, Flair NEO, Flair 2GO, or Flair Signature. It is a replacement or spare accessory, not a complete brewing kit.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this cap fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO Preheat Cap is compatible with the Flair PRO and Flair PRO 2 only. It is not designed to fit any other Flair espresso maker, including the Flair 58, Flair 49 PRO, Flair Classic, Flair NEO, or Flair 2GO.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow is the preheat cap used?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO Preheat Cap is placed over a vessel of hot water with the portafilter resting on it, allowing the portafilter to absorb heat before pulling a shot. The same cap can then be set on a flat surface to act as a stable pad while filling and tamping the portafilter basket.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this cap included with the Flair PRO or PRO 2?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis listing is for the Flair PRO Preheat Cap sold as a standalone accessory, suitable as a replacement or an additional cap for Flair PRO and PRO 2 owners.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416868024541,"sku":"FLR-4P147834G","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-7c3a15-4d1ca63c1efc4304a03617763b4235af-mv2-sq.jpg?v=1793760821"},{"product_id":"flair-stainless-steel-plunger-o-rings-pro-2","title":"Flair Stainless Steel Plunger with O-rings for PRO 2","description":"\u003cp class=\"product-lead\"\u003eThe Flair Stainless Steel Plunger is a replacement plunger for the Flair Signature PRO and PRO 2 brew heads. Each unit ships with two o-rings included.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for the PRO and PRO 2 Brew Head\u003c\/h2\u003e\n\u003cp\u003eThe Flair Stainless Steel Plunger is machined for the Flair Signature PRO and PRO 2 specifically. Stainless steel construction resists corrosion and wear through repeated high-pressure pulls, keeping the plunger's fit and finish consistent over time.\u003c\/p\u003e\n\n\u003ch2\u003eReady to Install\u003c\/h2\u003e\n\u003cp\u003eTwo o-rings ship with every plunger, so the full seal set is on hand for the replacement. Having both o-rings included means the brew head can be fully serviced in one step without sourcing seals separately.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e corrosion-resistant material suited to repeated espresso pulls\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo o-rings included:\u003c\/strong\u003e complete seal set ships with every plunger\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO and PRO 2 compatibility:\u003c\/strong\u003e fits the Flair Signature PRO and PRO 2 brew heads only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded\u003c\/td\u003e\n      \u003ctd\u003ePlunger, 2 o-rings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible models\u003c\/td\u003e\n      \u003ctd\u003eFlair Signature PRO, Flair PRO 2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.3 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis plunger is for Flair Signature PRO and PRO 2 owners who need to replace a worn plunger or refresh the brew head seals as part of routine maintenance.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis plunger is not compatible with any other Flair model, including the PRO 3, 49 PRO, 58, 58 Plus 2, Classic, NEO, or 2GO. It is a replacement part, not a complete brew head.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this plunger fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Stainless Steel Plunger is compatible with the Flair Signature PRO and Flair PRO 2 brew heads only. It does not fit the PRO 3, 49 PRO, 58, 58 Plus 2, Classic, NEO, or 2GO models.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many o-rings are included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach Flair Stainless Steel Plunger ships with two o-rings, providing the complete seal set needed to fully service the PRO or PRO 2 brew head in a single replacement.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs this a complete brew head or just the plunger?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis is a replacement plunger assembly with o-rings only, not a complete brew head. It is intended for owners replacing a worn or damaged plunger on an existing Flair Signature PRO or PRO 2.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416874414301,"sku":"FLR-2P147810N","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-7c3a15-c1127fb417694ca6924bb7510468cef6-mv2-d-3572-2857-s-sq.jpg?v=1793760851"},{"product_id":"flair-espresso-split-spout-pro-2","title":"Flair Espresso Split Spout for PRO 2","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Split Spout is a small poly accessory for the Flair PRO 2 that divides a single pulled shot into two separate streams, letting two people drink from one brew. It attaches to the bottom of the Stainless Steel Spout (sold separately, required) and requires no changes to your normal pull technique.\u003c\/p\u003e\n\n\u003ch2\u003eShare a Shot Without Splitting the Work\u003c\/h2\u003e\n\u003cp\u003eThe Split Spout fits onto the underside of the PRO 2's Stainless Steel Spout before you brew. Once in place, it automatically routes the espresso into two streams as the shot flows through, landing in two cups simultaneously at the same temperature and volume. No pouring back and forth, no timing two separate pulls.\u003c\/p\u003e\n\n\u003ch2\u003eSimple to Add, Simple to Remove\u003c\/h2\u003e\n\u003cp\u003eBecause the Split Spout attaches at the spout rather than inside the brew head, it does not affect puck prep, pressure, or extraction. Remove it when brewing solo and the PRO 2 works exactly as it always does. The poly construction keeps the piece lightweight.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-stream output:\u003c\/strong\u003e divides one pulled shot into two separate cups simultaneously\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO 2 specific:\u003c\/strong\u003e designed and sized for the Flair PRO 2 only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpout-mount design:\u003c\/strong\u003e attaches to the bottom of the Stainless Steel Spout before brewing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoly construction:\u003c\/strong\u003e lightweight plastic material, not metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo technique change required:\u003c\/strong\u003e pull your shot exactly as normal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Machine\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO 2 only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRequired Accessory\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO 2 Stainless Steel Spout (not included)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003ePoly (plastic), not metal\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOutput Streams\u003c\/td\u003e\n      \u003ctd\u003e2\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Split Spout suits Flair PRO 2 owners who regularly brew for two and want both cups pulled in a single shot. It is a practical addition for households or workspaces where two people share espresso at the same time.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Split Spout is not compatible with any Flair model other than the PRO 2. It does not fit the Classic, NEO, 2GO, PRO 3, 49 PRO, or 58 Plus 2. It also does not work without the Stainless Steel Spout already installed on the PRO 2; that spout is a required prerequisite and is not included here.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Split Spout work with any Flair model other than the PRO 2?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair Espresso Split Spout is designed exclusively for the Flair PRO 2 and is not compatible with other Flair models, including the Classic, NEO, 2GO, PRO 3, 49 PRO, or 58 Plus 2.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the Stainless Steel Spout included with the Split Spout?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair PRO 2 Stainless Steel Spout is required for the Split Spout to attach and function, but it is sold separately. The Split Spout cannot be used without it already installed on the PRO 2.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes using the Split Spout change how I pull my shot?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Split Spout attaches to the outside of the Stainless Steel Spout and does not affect puck preparation, pressure, or lever technique. Pull your shot on the Flair PRO 2 exactly as you normally would; the Split Spout divides the output automatically.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the Split Spout made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Espresso Split Spout is made of poly (plastic) material, not metal. It is a lightweight piece that attaches to the bottom of the PRO 2's Stainless Steel Spout before brewing.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416881033437,"sku":"FLR-7P148060C","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-7c3a15-278033c97c6749ecb4ac0a58542e78eb-mv2-1-sq.jpg?v=1793760917"},{"product_id":"flair-espresso-pro-dispersion-screen","title":"Flair Espresso PRO Dispersion Screen","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso PRO Dispersion Screen is a replacement and upgrade accessory for the Flair PRO, PRO 2, and PRO 3 manual lever espresso makers, designed to sit on top of the coffee puck inside the stainless steel portafilter and promote even distribution of brew water through the grounds during extraction.\u003c\/p\u003e\n\n\u003ch2\u003eMore Even Extraction, Shot After Shot\u003c\/h2\u003e\n\u003cp\u003eUneven water flow through a coffee puck is one of the most common causes of channeling, where brew water finds the path of least resistance rather than saturating the grounds uniformly. The Flair PRO Dispersion Screen addresses this by sitting directly on top of the ground coffee in the portafilter, spreading incoming brew water across the full surface of the puck before it begins its path downward. The practical result is a more consistent extraction from edge to edge, which translates to better balance and repeatability in the cup.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for the PRO Portafilter\u003c\/h2\u003e\n\u003cp\u003eThe PRO Dispersion Screen is sized and shaped specifically for the stainless steel portafilter used across the Flair PRO family. Because it is purpose-built for these brew heads rather than adapted from a universal part, it seats correctly without modification and does not interfere with puck preparation or lever operation.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEven water distribution:\u003c\/strong\u003e Sits on top of the coffee puck to spread brew water uniformly across the grounds before extraction begins.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO-family fit:\u003c\/strong\u003e Sized specifically for the stainless steel portafilter used on the Flair PRO, PRO 2, and PRO 3.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSimple to use:\u003c\/strong\u003e Placed on top of dosed and leveled grounds; no tools or modification required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Models\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO, PRO 2, PRO 3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFits\u003c\/td\u003e\n      \u003ctd\u003eFlair stainless steel portafilter (PRO family)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.02 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe PRO Dispersion Screen suits Flair PRO, PRO 2, and PRO 3 owners who want to improve brew water distribution through the puck, or who need a replacement screen for their existing setup.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis screen is not compatible with other Flair models, including the Flair Classic, NEO, 2GO, Signature, 49 PRO, or 58 series; it fits the PRO-family stainless steel portafilter only.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this dispersion screen fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO Dispersion Screen is compatible with the Flair PRO, PRO 2, and PRO 3 manual lever espresso makers only. It is designed for the stainless steel portafilter used across that specific family and does not fit the Flair Classic, NEO, 2GO, Signature, 49 PRO, or 58 series brew heads.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhere does the dispersion screen sit during brewing?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO Dispersion Screen is placed on top of the dosed and leveled coffee grounds inside the stainless steel portafilter, before the brew head is assembled. It sits between the puck surface and the incoming brew water, spreading that water evenly across the grounds at the start of extraction.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I need any tools to use the dispersion screen?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo tools are required. The Flair PRO Dispersion Screen is simply set on top of the prepared coffee puck inside the portafilter as part of normal puck preparation. It requires no modification to the portafilter or brew head.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416887095517,"sku":"FLR-3P822463N","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/03-7c3a15-69eae61cebf5463b94c4c47a2f31c5c3-mv2-d-1600-1600-s.jpg?v=1793760951"},{"product_id":"flair-pro-2-removable-stainless-steel-spout","title":"Flair PRO 2 Removable Stainless Steel Spout","description":"\u003cp class=\"product-lead\"\u003eThe Flair PRO 2 Removable Spout is a stainless steel snap-on spout designed for the PRO 2 portafilter, giving home baristas the option to switch between spouted and naked (bottomless) espresso extraction without tools or disassembly.\u003c\/p\u003e\n\n\u003ch2\u003eSpouted or Naked, Your Choice\u003c\/h2\u003e\n\u003cp\u003eThe PRO 2 Removable Spout snaps onto the PRO 2 portafilter securely during extraction, directing the espresso flow and reducing the chance of spray or mess at the cup. When you want to observe the extraction or clean the basket more easily, the spout snaps back off just as quickly. That flexibility means one portafilter can serve both brewing styles without purchasing a second dedicated basket assembly.\u003c\/p\u003e\n\n\u003ch2\u003eA Practical Addition to a Second Portafilter\u003c\/h2\u003e\n\u003cp\u003eEvery PRO 2 ships with one spout already included, so this additional spout is most useful for those who own a second PRO 2 portafilter and want spouted capability on both. It is a convenience accessory for workflow and cleanliness, not a required upgrade for quality espresso.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e durable, food-safe material that resists corrosion and is easy to rinse clean\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool-free snap fit:\u003c\/strong\u003e attaches and detaches from the PRO 2 portafilter without tools\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpouted and naked brewing:\u003c\/strong\u003e add for directed flow, remove for naked extraction or cleaning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO 2 specific:\u003c\/strong\u003e designed exclusively for the PRO 2 portafilter; not compatible with the original PRO brewing head\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAttachment method\u003c\/td\u003e\n      \u003ctd\u003eSnap-on \/ snap-off, no tools required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible with\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO 2 portafilter\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNot compatible with\u003c\/td\u003e\n      \u003ctd\u003eOriginal Flair PRO brewing head\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis spout suits Flair PRO 2 owners who want spouted brewing on a second portafilter, or who need a replacement for the spout that ships with the PRO 2. It is also a good fit for anyone who switches regularly between spouted and naked extraction and wants a quick, tool-free way to do so.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis spout is not compatible with the original Flair PRO brewing head. PRO 2 units already include one spout, so this accessory is not needed to brew great espresso. It does not fit any other Flair model.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Flair PRO 2 already come with a spout?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Every Flair PRO 2 ships with one removable stainless steel spout included. This listing is for an additional or replacement spout, most useful for PRO 2 owners who have a second portafilter and want spouted brewing capability on both.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this spout fit the original Flair PRO brewing head?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair PRO 2 Removable Spout is not compatible with the original Flair PRO brewing head. It is designed specifically for the PRO 2 portafilter and should not be assumed to fit other Flair models.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo I need this spout to pull good espresso on the PRO 2?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The removable spout on the Flair PRO 2 is a convenience accessory, not a requirement for quality espresso. Many PRO 2 users brew naked (without the spout) to observe the extraction. The spout's main benefit is directing flow and reducing spray at the cup.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416889618653,"sku":"FLR-3P148121N","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-7c3a15-85abc9943e4048449310b9081fae7f91-mv2-d-2186-2186-s.jpg?v=1793761006"},{"product_id":"flair-espresso-pro-portafilter","title":"Flair Espresso PRO Portafilter","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso PRO Portafilter is a replacement and spare portafilter basket assembly compatible with the Flair PRO, PRO 2, and PRO 3 brewing heads, designed to let you pre-pack a second dose so a back-to-back shot is ready to pull the moment your first is done. Note that the spout and dispersion screen are sold separately and are not included with this portafilter.\u003c\/p\u003e\n\n\u003ch2\u003ePull Two Shots Without Repacking\u003c\/h2\u003e\n\u003cp\u003eWhen serving two people or pulling a second shot for yourself, the time between shots matters. Having a pre-packed PRO Portafilter on hand means the grounds are already dosed and tamped before your first shot finishes, so you move directly to the next pull without interrupting your workflow or letting the brew head cool unnecessarily.\u003c\/p\u003e\n\n\u003ch2\u003eA Direct Fit for the PRO Brewing Head Family\u003c\/h2\u003e\n\u003cp\u003eThe PRO Portafilter is built specifically for the Flair PRO, PRO 2, and PRO 3 brewing heads. It is not compatible with other Flair models, and it will not serve as a compatibility upgrade for a PRO-Enabled Flair unit. If you are unsure which brewing head your Flair uses, check the model name on your unit before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack-to-back shot prep:\u003c\/strong\u003e pre-pack a second dose while your first shot is still pulling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO family fit:\u003c\/strong\u003e compatible with Flair PRO, PRO 2, and PRO 3 brewing heads only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpout and dispersion screen not included:\u003c\/strong\u003e both components are sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible brewing heads\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO, PRO 2, PRO 3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.4 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded in box\u003c\/td\u003e\n      \u003ctd\u003ePRO Portafilter only (spout and dispersion screen sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe PRO Portafilter suits Flair PRO, PRO 2, or PRO 3 owners who regularly pull back-to-back shots and want to eliminate the repacking pause between them. It is also a practical spare for anyone who wants a backup portafilter basket on hand.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe PRO Portafilter is not compatible with the Flair Classic, NEO, 2GO, Signature, 49 PRO, or 58 series brewing heads, and it does not function as a compatibility upgrade for PRO-Enabled Flair units. It does not include a spout or dispersion screen.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this portafilter fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO Portafilter is compatible with the Flair PRO, PRO 2, and PRO 3 brewing heads only. It does not fit the Flair Classic, NEO, 2GO, Signature, 49 PRO, or 58 series, and it is not a compatibility upgrade for PRO-Enabled units.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this portafilter come with a spout and dispersion screen?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair PRO Portafilter does not include a spout or dispersion screen. Both of those components are sold separately and must be ordered individually if you need them.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhy would I need a second portafilter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA spare Flair PRO Portafilter lets you pre-dose and tamp a second shot while the first is still being pulled, so you can serve two consecutive espressos without the delay of repacking the same basket between shots.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416890667229,"sku":"FLR-2P148220N","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-7c3a15-cd0cdf6f1865423ba3d682f6e32f0738-mv2-d-2471-2471-s.jpg?v=1793761040"},{"product_id":"flair-pro-3-upgrade-kit","title":"Flair PRO 3 Upgrade Kit for PRO 2 Owners","description":"\u003cp class=\"product-lead\"\u003eThe Flair PRO 3 Upgrade Kit brings three PRO 3 components to any existing Flair PRO 2 brew head: the No-Preheat Thin Cylinder, Preheat Funnel, and Articulating Shot Mirror with Magnetic Coin. The kit converts a PRO 2 into a PRO 3 setup without replacing the full machine. Compatible with Flair PRO 2 in black, white, and chrome.\u003c\/p\u003e\n\n\u003ch2\u003eWhat the Upgrade Adds\u003c\/h2\u003e\n\u003cp\u003eThe PRO 3 No-Preheat Thin Cylinder is the centerpiece of this kit. The stainless steel plunger from the existing PRO 2 brew head transfers directly into the Thin Cylinder with no additional hardware required. The slimmer cylinder profile is the defining change between the PRO 2 and PRO 3 brew head designs, and this kit makes that transition possible without purchasing a complete new brewer.\u003c\/p\u003e\n\n\u003cp\u003eThe Preheat Funnel works with the Thin Cylinder to bring the brew chamber up to temperature before pulling a shot, helping maintain extraction consistency across back-to-back pulls. For PRO 2 owners who have worked around the absence of a dedicated preheat accessory, this funnel closes that gap directly.\u003c\/p\u003e\n\n\u003cp\u003eThe Articulating Shot Mirror with Magnetic Coin attaches magnetically to the brew head and angles to give a clear view of the basket and extraction as it happens. This is a practical addition for dialing in flow rate and identifying channeling without repositioning the brewer or crouching to see the basket from below.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO 3 No-Preheat Thin Cylinder:\u003c\/strong\u003e accepts the stainless steel plunger from any PRO 2 brew head directly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePreheat Funnel:\u003c\/strong\u003e brings the Thin Cylinder to temperature before extraction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArticulating Shot Mirror:\u003c\/strong\u003e magnetically mounts to the brew head for a clear view of the basket during extraction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic Coin included:\u003c\/strong\u003e secures the shot mirror to the brew head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO 2 compatibility:\u003c\/strong\u003e fits Flair PRO 2 in black, white, and chrome\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible model\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO 2 (black, white, chrome)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded items\u003c\/td\u003e\n      \u003ctd\u003ePRO 3 No-Preheat Thin Cylinder, Preheat Funnel, Articulating Shot Mirror with Magnetic Coin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis kit is for Flair PRO 2 owners who want the PRO 3 brew head components (the Thin Cylinder, Preheat Funnel, and Articulating Shot Mirror) without purchasing a complete new brewer. It suits PRO 2 owners in any of the three available colorways: black, white, or chrome.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit is not compatible with the Flair PRO 3, Classic, NEO, 2GO, Signature, or 49 PRO; it is designed exclusively for the PRO 2 brew head. It does not include a brew head, plunger, pressure gauge, or any other PRO 2 component; the existing PRO 2 plunger is required to complete the setup.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this upgrade kit fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO 3 Upgrade Kit is compatible exclusively with the Flair PRO 2 in black, white, and chrome. It is not designed for the Flair PRO 3, Classic, NEO, 2GO, Signature, or 49 PRO.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo I need to buy a new plunger to use the Thin Cylinder?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo additional plunger is needed. The Flair PRO 3 Upgrade Kit is designed so the stainless steel plunger from an existing PRO 2 brew head transfers directly into the included PRO 3 No-Preheat Thin Cylinder. The plunger is not included in the kit.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the Preheat Funnel do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Preheat Funnel fits onto the PRO 3 Thin Cylinder and allows the brew chamber to be brought up to temperature before pulling a shot. Preheating the cylinder helps maintain more consistent extraction temperatures, particularly when pulling multiple shots in a session.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the Articulating Shot Mirror attach to the brew head?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Articulating Shot Mirror included in the Flair PRO 3 Upgrade Kit attaches magnetically using the included Magnetic Coin, which affixes to the brew head. The mirror articulates to angle toward the basket, giving a view of the extraction without repositioning the brewer.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416892993757,"sku":"FLR-2P118157N","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-pro-3-upgrade-kit-sized-sq.jpg?v=1793761108"},{"product_id":"flair-second-shot-plus-pro-3","title":"Flair Second Shot Plus Kit for PRO 3","description":"\u003cp class=\"product-lead\"\u003eThe Flair Second Shot Plus for PRO 3 is a replacement brewing head kit that gives PRO series users a fully prepped second cylinder so back-to-back espresso shots are possible without waiting for the first cylinder to cool or be cleaned between pulls. The kit is compatible with the original PRO, PRO 2, and PRO 3 brewing heads only.\u003c\/p\u003e\n\n\u003ch2\u003ePull Two Shots Without Stopping\u003c\/h2\u003e\n\u003cp\u003eWhen pulling espresso on a manual lever machine, the brewing cylinder needs time between shots: time to cool, rinse, and reload. The Second Shot Plus for PRO 3 solves that by giving the brewer a complete, ready-to-use second cylinder assembly. While the first shot is being enjoyed, the second cylinder can be loaded and prepped, so the next pull follows immediately rather than after a multi-minute wait. For anyone serving two or more people, or dialing in a recipe that requires back-to-back comparison shots, this is a practical workflow improvement rather than a luxury add-on.\u003c\/p\u003e\n\n\u003ch2\u003ePRO 3 No-Preheat Cylinder Included\u003c\/h2\u003e\n\u003cp\u003eThe kit centers on the PRO 3 No-Preheat Thin-Cylinder, which is designed to reach brew-ready temperature without a separate preheat step. Paired with the stainless steel portafilter, dispersion screen, plunger, and spout, the assembly mirrors what ships with the PRO 3 brew head. The second shot is brewed under the same conditions as the first, not a compromised approximation of it.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO 3 No-Preheat Thin-Cylinder:\u003c\/strong\u003e eliminates a separate preheat step before the second pull\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO Stainless Steel Portafilter:\u003c\/strong\u003e matches the standard PRO series portafilter for consistent dosing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO Stainless Steel Dispersion Screen:\u003c\/strong\u003e ensures even water distribution across the puck\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO Stainless Steel Plunger:\u003c\/strong\u003e full-travel plunger compatible with PRO series cylinders\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless Steel Spout:\u003c\/strong\u003e directs the shot into the cup without additional adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eItem\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eContents\u003c\/td\u003e\n      \u003ctd\u003ePRO 3 No-Preheat Thin-Cylinder, PRO Stainless Steel Portafilter, PRO Stainless Steel Dispersion Screen, PRO Stainless Steel Plunger, Stainless Steel Spout\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimary materials\u003c\/td\u003e\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO, PRO 2, and PRO 3 brewing heads only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight (kit)\u003c\/td\u003e\n      \u003ctd\u003e1 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Second Shot Plus for PRO 3 suits Flair PRO, PRO 2, or PRO 3 owners who regularly pull back-to-back shots: for a second person, for a lungo-style double, or for recipe development that requires comparing two pulls in quick succession. It is a direct workflow upgrade for anyone who has felt the wait between shots as a real friction point.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit is not compatible with PRO-Enabled Flair models or any other Flair brew head outside the PRO, PRO 2, and PRO 3 series. It does not add electric preheating, automation, or pump-assisted pressure to any machine it is used with. The PRO series remains a fully manual lever press regardless of how many cylinder assemblies are on hand.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does the Second Shot Plus for PRO 3 fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Second Shot Plus for PRO 3 is compatible with the original Flair PRO, PRO 2, and PRO 3 brewing heads only. It does not fit PRO-Enabled Flair configurations, the Flair 58, 49 PRO, NEO, Classic, 2GO, or Signature brew heads. Flair's buyers guide covers the differences between brew heads in detail.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Second Shot Plus for PRO 3 includes five components: a PRO 3 No-Preheat Thin-Cylinder, a PRO Stainless Steel Portafilter, a PRO Stainless Steel Dispersion Screen, a PRO Stainless Steel Plunger, and a Stainless Steel Spout. Together these form a complete second brewing assembly ready to load and pull.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the No-Preheat cylinder mean no warm-up is needed at all?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe PRO 3 No-Preheat Thin-Cylinder is designed to reach brew-ready temperature without a dedicated preheat step, which is what distinguishes it from earlier PRO cylinders. Exact time-to-brew-ready figures are not specified for this kit; Flair's PRO 3 documentation covers temperature management in detail.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes adding this kit make the Flair PRO 3 automatic or semi-automatic?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flair PRO 3 is a fully manual lever espresso maker with no pump and no boiler, and the Second Shot Plus kit does not change that. Pressure is applied entirely by hand through the lever. The kit adds a second cylinder assembly to reduce wait time between shots, not automation of any kind.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416896073949,"sku":"FLR-2P116191N","price":114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-pro-3-second-shot-plus-optimized.jpg?v=1793761190"},{"product_id":"flair-flow-control-2-spout-kit","title":"Flair Espresso Flow-Control 2 Spout Kit","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso Flow-Control 2 Spout Kit includes three removable and replaceable spouts designed to fit the Flow-Control 2 Portafilter on the Flair NEO. This kit is the direct replacement when spouts have been lost, damaged, or clogged through regular use.\u003c\/p\u003e\n\n\u003ch2\u003eKeep Your Flow-Control 2 Portafilter Running\u003c\/h2\u003e\n\u003cp\u003eThe spouts in the Flow-Control 2 Portafilter are small, removable parts that see regular contact with espresso and cleaning routines. Over time they can clog with mineral deposits or coffee oils, and they are easy to misplace during disassembly. Having a set of three replacement spouts on hand means a blocked or missing spout does not interrupt your daily pulling routine on the Flair NEO.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for the Flow-Control 2 Portafilter\u003c\/h2\u003e\n\u003cp\u003eThese spouts are made specifically for the Flow-Control 2 Portafilter. They are not compatible with earlier Flow-Control Portafilters or Flair NEO units purchased before March 2021. If your NEO or its portafilter predates March 2021, the portafilter itself must be upgraded to the Flow-Control 2 version before these spouts will fit.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree spouts included:\u003c\/strong\u003e one kit contains three removable and replaceable spouts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect replacement:\u003c\/strong\u003e suited for spouts that are lost, damaged, or clogged\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow-Control 2 fit:\u003c\/strong\u003e designed specifically for the Flow-Control 2 Portafilter on the Flair NEO\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eContents\u003c\/td\u003e\n      \u003ctd\u003e3 replacement spouts\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible portafilter\u003c\/td\u003e\n      \u003ctd\u003eFlow-Control 2 Portafilter (Flair NEO)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility note\u003c\/td\u003e\n      \u003ctd\u003eNot compatible with Flow-Control Portafilters or NEO units purchased before March 2021\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis kit suits Flair NEO owners who use the Flow-Control 2 Portafilter and need to replace spouts that have been lost, damaged, or clogged during regular use.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit is not compatible with any Flow-Control Portafilter or Flair NEO purchased before March 2021; those setups require a portafilter upgrade first. It does not fit any other Flair model.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many spouts come in the Flow-Control 2 Spout Kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Espresso Flow-Control 2 Spout Kit includes three removable and replaceable spouts. All three are identical and intended for use with the Flow-Control 2 Portafilter on the Flair NEO.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill these spouts fit my older Flair NEO or original Flow-Control Portafilter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Flow-Control 2 Spout Kit is only compatible with the Flow-Control 2 Portafilter. Flair NEO units and Flow-Control Portafilters purchased before March 2021 use an earlier design and must be upgraded to the Flow-Control 2 Portafilter before these spouts will fit.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhen should I replace the spouts on my Flow-Control 2 Portafilter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eReplacement spouts for the Flow-Control 2 Portafilter are typically needed when a spout has been lost during disassembly, cracked or damaged, or clogged in a way that cannot be cleared through normal cleaning. Keeping a spare set on hand avoids downtime between espresso sessions.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416897155293,"sku":"FLR-3N241292R","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-fc-spout-kit-square.jpg?v=1793761223"},{"product_id":"flair-pro-2-portafilter-silicone-sleeve","title":"Flair PRO 2 Portafilter Silicone Sleeve","description":"\u003cp class=\"product-lead\"\u003eThe Flair PRO 2 Portafilter Silicone Sleeve is a heat-protection and base-guard accessory for the Flair PRO 2 manual lever espresso maker, fitting over the stainless steel portafilter to keep it safe to handle during preheating and to protect the portafilter base from contact damage. It is also compatible with legacy PRO stainless steel brew heads.\u003c\/p\u003e\n\n\u003ch2\u003eHeat Protection Where You Need It\u003c\/h2\u003e\n\u003cp\u003eWhen preheating the Flair PRO 2 portafilter, the stainless steel body gets hot enough to be uncomfortable or unsafe to grip. The silicone sleeve wraps the portafilter and acts as a thermal barrier, so the portafilter remains safe to handle throughout the preheat and pull process without interrupting your workflow.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt-In Lip Guards the Portafilter Base\u003c\/h2\u003e\n\u003cp\u003eThe sleeve includes a small raised lip at its lower edge. This lip keeps the stainless steel portafilter body from making direct contact with the portafilter base of the PRO 2, preventing the kind of surface wear and scratching that repeated metal-on-metal contact causes over time. It is a small detail that extends the condition of both parts.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat-safe grip:\u003c\/strong\u003e silicone construction keeps the portafilter safe to touch even when preheated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase-protection lip:\u003c\/strong\u003e small raised lip prevents stainless steel portafilter from contacting and damaging the portafilter base\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBroad compatibility:\u003c\/strong\u003e fits the Flair PRO 2 portafilter and legacy PRO stainless steel brew heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSilicone\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Models\u003c\/td\u003e\n      \u003ctd\u003eFlair PRO 2; legacy PRO stainless steel brew heads\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.03 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis sleeve suits Flair PRO 2 owners who preheat their portafilter and want a safer, more comfortable grip during the process, as well as those looking to protect the portafilter base from surface wear. It also fits users of legacy Flair PRO stainless steel brew heads.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis sleeve is not designed for other Flair models such as the Flair 58, 58 Plus 2, 49 PRO, NEO, Classic, or 2GO, and should not be assumed compatible with their portafilters.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this sleeve fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO 2 Portafilter Silicone Sleeve is designed for the Flair PRO 2 portafilter. It is also compatible with legacy Flair PRO stainless steel brew heads. It is not listed as compatible with other Flair models.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the raised lip on the sleeve do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe small lip on the Flair PRO 2 Portafilter Silicone Sleeve sits between the stainless steel portafilter body and the portafilter base, preventing direct metal-on-metal contact that would otherwise scratch or wear the base over repeated use.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs this sleeve necessary for using the Flair PRO 2?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair PRO 2 Portafilter Silicone Sleeve is particularly useful when preheating the portafilter, since the stainless steel becomes hot during that process. Without it, handling the portafilter during or after preheating requires care to avoid burns.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416898203869,"sku":"FLR-4P211070G","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-pro-2-portafilter-silicone-sleeve-square-small.jpg?v=1793761252"},{"product_id":"flair-58-drip-tray","title":"Flair Espresso 58 Drip Tray","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso 58 Drip Tray is a silicone replacement drip tray designed to fit the solid base of the Flair 58, catching drops and drips during brewing to keep your brew station clean.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for the Flair 58\u003c\/h2\u003e\n\u003cp\u003eThe Flair 58 Drip Tray is made from silicone and seats seamlessly between the solid base of the Flair 58. Because it fits the base precisely, it stays in place during a pull and collects any stray liquid without shifting or leaking onto your counter.\u003c\/p\u003e\n\n\u003ch2\u003eSimple to Replace\u003c\/h2\u003e\n\u003cp\u003eDrip trays take daily wear from repeated contact with hot water, coffee oils, and cleaning agents. Having a direct replacement on hand means a worn or stained tray can be swapped out without interrupting your routine or sourcing a workaround.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone construction:\u003c\/strong\u003e flexible, easy to rinse, and resistant to coffee staining\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise fit:\u003c\/strong\u003e seats between the solid base of the Flair 58\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCatches drips during brewing:\u003c\/strong\u003e keeps the brew station clean between pulls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSilicone\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.22 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Model\u003c\/td\u003e\n      \u003ctd\u003eFlair 58\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis drip tray is for Flair 58 owners who need a direct replacement for a worn, damaged, or missing drip tray. It suits anyone who wants to keep a spare on hand for a clean, uninterrupted brewing setup.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis tray is not compatible with other Flair models, including the Flair 49 PRO, PRO 2, PRO 3, NEO, Classic, or 2GO. It is a replacement part only and does not include any other Flair 58 components.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this drip tray fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Drip Tray is designed specifically for the Flair 58. It seats between the solid base of the Flair 58 and is not listed as compatible with other Flair models such as the 49 PRO, PRO 2, PRO 3, Classic, NEO, or 2GO.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the drip tray made from?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Drip Tray is made from silicone, which is flexible, easy to rinse clean, and holds up to regular contact with hot water and coffee oils.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhy would I need a replacement drip tray?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe drip tray on the Flair 58 sits directly below the brew head and catches liquid during every pull. Over time it can stain, deform, or simply wear out. A replacement lets you restore a clean, properly fitted tray without sourcing a workaround part.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416899711197,"sku":"FLR-45210370B","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-flair-58-drip-tray.jpg?v=1793761300"},{"product_id":"flair-58-plunger-key","title":"Flair Espresso 58 Plunger Key","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso 58 Plunger Key is a small alignment tool designed to simplify plunger orientation on the Flair 58 and Flair 58x, ensuring the plunger tabs are correctly positioned front and back so the stem tabs engage properly when the lever is lifted.\u003c\/p\u003e\n\n\u003ch2\u003ePrecise Alignment, Every Pull\u003c\/h2\u003e\n\u003cp\u003eCorrect plunger orientation on the Flair 58 and Flair 58x is essential for the valve and stem to engage as intended. When the plunger tabs are even slightly off-axis, the stem tabs cannot seat cleanly as the lever rises, which can disrupt the pressure seal and introduce inconsistency into the shot. The 58 Plunger Key removes the guesswork by giving you a physical reference point to rotate the plunger into the correct position before each brew.\u003c\/p\u003e\n\n\u003ch2\u003eSimple to Use\u003c\/h2\u003e\n\u003cp\u003eInsert the tabs of the Plunger Key into the plunger tab holes, then rotate until the plunger tabs face front and back. That single step confirms the plunger is seated in the orientation the Flair 58 and Flair 58x require for reliable stem engagement. No measuring, no visual estimation.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlignment tabs:\u003c\/strong\u003e fit directly into the plunger tab holes for positive, repeatable positioning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlair 58 and 58x compatible:\u003c\/strong\u003e designed specifically for the dual-slot valve plunger used in these models\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact form:\u003c\/strong\u003e lightweight at 0.2 lb, easy to keep at the brew station\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Models\u003c\/td\u003e\n      \u003ctd\u003eFlair 58, Flair 58x\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe 58 Plunger Key suits Flair 58 and Flair 58x owners who want a reliable, repeatable way to orient their plunger correctly before each shot without relying on visual judgment alone.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe 58 Plunger Key is not compatible with single-slot valve plungers purchased after April 12, 2023, and does not fit any Flair 58 Plus model.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does the 58 Plunger Key fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plunger Key is compatible with the Flair 58 and Flair 58x. It is not compatible with single-slot valve plungers purchased after April 12, 2023, and does not fit any Flair 58 Plus model.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the 58 Plunger Key actually do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plunger Key is an alignment tool. Its tabs insert into the plunger tab holes and allow the user to rotate the plunger until the tabs face front and back, which is the correct orientation for the stem tabs to engage when the lever is lifted on the Flair 58 or Flair 58x.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the 58 Plunger Key required for every shot?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Plunger Key is a positioning aid used to orient the plunger correctly before brewing on the Flair 58 or Flair 58x. It simplifies a step that would otherwise require visual estimation to ensure the plunger tabs are front and back for proper stem engagement.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416901611741,"sku":"FLR-75112889B","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-plunger-key-woo.jpg?v=1793761332"},{"product_id":"flair-espresso-paper-portafilter-filters","title":"Flair Espresso Paper Portafilter Filters (100-Pack)","description":"\u003cp class=\"product-lead\"\u003eFlair Espresso Paper Portafilter Filters are single-use paper discs placed at the bottom of a Flair portafilter basket before loading grounds, sold in packs of 100. Two sizes are available: one for the Flair 58 family and one for Classic, NEO, and PRO models.\u003c\/p\u003e\n\n\u003ch2\u003eCleaner Shots, Less Mess\u003c\/h2\u003e\n\u003cp\u003ePlacing a paper filter at the base of the portafilter basket before adding grounds helps direct water evenly through the coffee bed rather than finding the path of least resistance. The result is a more uniform extraction and noticeably higher clarity in the cup, the kind of difference that matters when you are dialing in a new coffee or comparing grind settings.\u003c\/p\u003e\n\n\u003ch2\u003eFewer Sprays from Bottomless Portafilters\u003c\/h2\u003e\n\u003cp\u003eBottomless portafilters are useful for diagnosing extraction, but channeling can send hot espresso spraying outward. A paper filter seated at the basket floor reduces that channeling, which means less cleanup and more consistent pressure distribution across the puck from the first drop to the last.\u003c\/p\u003e\n\n\u003ch2\u003eAll Basket Pores Working Together\u003c\/h2\u003e\n\u003cp\u003eWithout a paper filter, fine grounds can lodge in the basket's perforations and block flow. The paper layer keeps grounds above the basket floor, freeing every pore to contribute to the extraction rather than acting as a partial obstruction. Over a session of multiple shots, that consistency adds up.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePack of 100:\u003c\/strong\u003e single-use paper filters, one size per pack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduces channeling:\u003c\/strong\u003e promotes even water distribution through the coffee bed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduces spray:\u003c\/strong\u003e limits espresso spray from bottomless portafilters\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrees basket pores:\u003c\/strong\u003e keeps grounds off the basket floor so all perforations remain open\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo size options:\u003c\/strong\u003e Flair 58 size and Classic\/NEO\/PRO size, selected at checkout\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eFlair 58\u003c\/th\u003e\n      \u003cth\u003eClassic, NEO \u0026amp; PRO\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible models\u003c\/td\u003e\n      \u003ctd\u003eFlair 58 family (58mm portafilters)\u003c\/td\u003e\n      \u003ctd\u003eFlair Classic, NEO, PRO, PRO 2, PRO 3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity per pack\u003c\/td\u003e\n      \u003ctd\u003e100\u003c\/td\u003e\n      \u003ctd\u003e100\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePlacement\u003c\/td\u003e\n      \u003ctd\u003eBottom of portafilter basket, before grounds\u003c\/td\u003e\n      \u003ctd\u003eBottom of portafilter basket, before grounds\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese filters suit any Flair espresso maker owner, whether using the Flair 58 family or a Classic, NEO, or PRO model, who wants cleaner-tasting shots, more even extractions, and less spray when pulling through a bottomless portafilter.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese filters are not compatible with non-Flair portafilters and are not reusable. They do not replace the portafilter basket itself and are not intended for use with any other espresso machine brand.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhere exactly does the paper filter go in the portafilter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe paper filter sits at the bottom of the Flair portafilter basket before any coffee grounds are added. Once the filter is seated flat against the basket floor, grounds are loaded on top of it in the usual way before tamping and brewing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich size should I choose for my Flair model?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eChoose the Flair 58 size if you own any machine in the Flair 58 family, which uses 58mm portafilters. Choose the Classic, NEO \u0026amp; PRO size if you own a Flair Classic, NEO, PRO, PRO 2, or PRO 3, as those models all share the same basket diameter.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre these paper filters reusable?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eFlair Espresso Paper Portafilter Filters are single-use. Each filter is used for one shot and then discarded. Packs contain 100 filters, providing enough supply for an extended period of daily use before reordering is needed.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill using a paper filter change the taste of my espresso?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003ePaper filters at the basket floor promote more even water distribution through the coffee bed, which tends to produce a cleaner, clearer cup. The primary benefit is higher shot clarity and reduced channeling rather than a change in roast character or body.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Flair 58","offer_id":68416902136029,"sku":"FLR-65114340W","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Classic, NEO \u0026 Pro","offer_id":68416902168797,"sku":"FLR-6X115804N","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-paper-filter-all-product-web.jpg?v=1793761402"},{"product_id":"flair-espresso-58mm-ese-pod-basket-flair-58","title":"Flair Espresso 58mm E.S.E. Pod Basket for Flair 58","description":"\u003cp class=\"product-lead\"\u003eThe Flair Espresso 58mm E.S.E. Pod Basket is a replacement basket designed for the Flair 58 and Flair 58x brew heads, allowing those machines to accept standard 58mm E.S.E. (Easy Serving Espresso) paper pod sachets in place of loose ground coffee. It is not compatible with loose coffee and is not designed for use with a puck screen.\u003c\/p\u003e\n\n\u003ch2\u003ePull a Shot Without a Grinder\u003c\/h2\u003e\n\u003cp\u003eThe 58mm E.S.E. Pod Basket makes it practical to use the Flair 58 or Flair 58x when a grinder is not available. Traveling, between grinders, or simply short on time, the basket accepts single-serving E.S.E. pods from brands such as Illy, Lavazza, Kimbo, Bristot, and Miscela d'Oro. Because E.S.E. pods are sold nitrogen-flushed in individual foil wrappers, they stay fresh for months or longer without refrigeration, making them a reliable backup supply.\u003c\/p\u003e\n\n\u003ch2\u003eStraightforward Brewing Technique\u003c\/h2\u003e\n\u003cp\u003eThe 58mm E.S.E. Pod Basket is used by centering the paper pod sachet in the bottom of the basket and locking it into the Flair 58 brew head. Flair recommends skipping pre-infusion and pulling directly to a pressure of 6 to 8 BAR. Because E.S.E. pods are single-serving, a yield of approximately 20 to 24 grams of espresso is recommended rather than attempting to pull a full double-shot volume. For a double, pulling two separate shots is preferable to stacking two pods. Using a spouted portafilter is also recommended, as some water may bypass the puck and cause spritzing in a naked portafilter.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e58mm diameter:\u003c\/strong\u003e fits the Flair 58 and Flair 58x brew heads\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eE.S.E. pod compatible:\u003c\/strong\u003e accepts standard 58mm paper pod sachets from major pod brands\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo puck screen needed:\u003c\/strong\u003e the basket is sized for pods only; the puck screen must be left out to preserve head space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle-serving format:\u003c\/strong\u003e sized for one pod per shot, with a recommended yield of 20 to 24 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBasket diameter\u003c\/td\u003e\n      \u003ctd\u003e58mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible machines\u003c\/td\u003e\n      \u003ctd\u003eFlair 58, Flair 58x\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible pod format\u003c\/td\u003e\n      \u003ctd\u003eStandard E.S.E. (Easy Serving Espresso) paper pod sachets\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended brew pressure\u003c\/td\u003e\n      \u003ctd\u003e6 to 8 BAR\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended yield\u003c\/td\u003e\n      \u003ctd\u003e20 to 24 grams per shot\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePuck screen use\u003c\/td\u003e\n      \u003ctd\u003eNot compatible; do not use with pods\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLoose coffee use\u003c\/td\u003e\n      \u003ctd\u003eNot designed for loose coffee\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe 58mm E.S.E. Pod Basket suits Flair 58 and Flair 58x owners who want the option to brew from pre-packaged E.S.E. pods when traveling, between grinders, or when convenience is the priority. It works with widely available pod brands and requires no grinder or additional prep beyond opening the foil wrapper.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis basket is not designed for use with loose ground coffee and cannot be used alongside the Flair 58 puck screen. It does not fit other Flair models. E.S.E. pods themselves are sold separately and are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this basket fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair Espresso 58mm E.S.E. Pod Basket is compatible with the Flair 58 and Flair 58x brew heads only. It is not listed as compatible with other Flair models such as the 49 PRO, PRO 2, PRO 3, Classic, NEO, 2GO, or Signature.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this basket be used with loose ground coffee?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The 58mm E.S.E. Pod Basket is designed specifically for E.S.E. paper pod sachets and is not designed for use with loose ground coffee. For loose coffee, the standard Flair 58 baskets are the appropriate choice.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat pod brands are compatible?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 58mm E.S.E. Pod Basket accepts standard 58mm E.S.E. paper pod sachets. Compatible brands include Illy, Lavazza, Kimbo, Bristot, and Miscela d'Oro, among others. E.S.E. pods are sold separately and are widely available at major food retailers.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eShould the puck screen be used with this basket?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The puck screen must not be used when brewing with the 58mm E.S.E. Pod Basket. There is not enough head space in the basket to accommodate both a pod and the puck screen, so the puck screen should be set aside when using pods.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat yield and pressure are recommended when brewing with E.S.E. pods?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eFlair recommends pulling directly to a pressure of 6 to 8 BAR without pre-infusion and stopping at a yield of approximately 20 to 24 grams of espresso per shot. For a double, two separate shots are recommended rather than using two pods at once.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416902496477,"sku":"FLR-35113138N","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-ese-basket-with-pod.jpg?v=1793761447"},{"product_id":"flair-58-etched-puck-screen","title":"Flair 58 Etched Puck Screen","description":"\u003cp class=\"product-lead\"\u003eThe Flair 58 Etched Puck Screen is a replacement puck screen for the Flair 58 espresso maker, made from magnetic stainless steel 304 with a black PVD coating and a laser-etched Flair 58 logo. Its etched hole pattern improves water distribution across the coffee bed compared to the original sintered mesh screen, and its magnetic construction allows removal with any magnet.\u003c\/p\u003e\n\n\u003ch2\u003eMore Even Water Distribution\u003c\/h2\u003e\n\u003cp\u003eThe etched pattern across the screen's surface softens and spreads the flow of water as it meets the coffee bed, reducing the risk of channeling at the edges of the puck. Where the original sintered mesh screen could direct water unevenly and required a pre-wet step to prevent edge channeling, the etched design addresses that without the extra step. More consistent water delivery across the full 58.55 mm diameter means the grounds are saturated more uniformly, which supports more even extraction shot to shot.\u003c\/p\u003e\n\n\u003ch2\u003eEasier to Clean, Faster to Preheat\u003c\/h2\u003e\n\u003cp\u003eThe etched stainless steel surface does not trap coffee fines the way a sintered mesh does, so rinsing the screen between shots is straightforward. Magnetic stainless steel heats up faster than sintered mesh, which shortens the preheating phase before pulling a shot. Removal requires only a magnet (the articulating shot mirror on the Flair 58 carries one), so the screen comes out without tools.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEtched hole pattern:\u003c\/strong\u003e 0.4 mm hole diameter distributes water evenly across the puck surface\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic stainless steel:\u003c\/strong\u003e removes with any magnet, including the shot mirror magnet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlack PVD coating:\u003c\/strong\u003e applied over stainless steel 304 (Martensitic) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo fines retention:\u003c\/strong\u003e etched surface cleans more easily than sintered mesh\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFaster preheating:\u003c\/strong\u003e material heats up more quickly than traditional sintered mesh\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLaser-etched Flair 58 logo:\u003c\/strong\u003e identifies the screen and confirms correct sizing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDiameter\u003c\/td\u003e\n      \u003ctd\u003e58.55 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHole diameter\u003c\/td\u003e\n      \u003ctd\u003e0.4 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThickness\u003c\/td\u003e\n      \u003ctd\u003e0.5 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eStainless steel 304 (Martensitic)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoating\u003c\/td\u003e\n      \u003ctd\u003eBlack PVD\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e0.2 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis screen suits Flair 58 owners who want more consistent water distribution across the puck, a screen that cleans quickly without retaining fines, and a part that removes without tools between shots or during maintenance.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis screen is sized specifically for the Flair 58 at 58.55 mm and is not compatible with other Flair models. It does not replace the portafilter basket, the brew head, or any other component of the Flair 58 brew group.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Flair models does this puck screen fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Etched Puck Screen is sized at 58.55 mm in diameter and is designed for the Flair 58 espresso maker. Flair lists it for the Flair 58 only, so buyers with a different Flair machine should confirm sizing before ordering.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow is this screen removed from the brew head?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Etched Puck Screen is made from magnetic stainless steel, so it can be lifted out with any magnet. The articulating shot mirror included with the Flair 58 carries a magnet that works for this purpose, meaning no separate tool is needed.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this screen replace the need for a pre-wet step?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe etched design of the Flair 58 Etched Puck Screen eliminates the need for a pre-wet to prevent edge channeling, which was a step sometimes used with the original sintered mesh screen. The etched hole pattern distributes water more evenly from the start of the shot.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does cleaning compare to the original sintered mesh screen?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flair 58 Etched Puck Screen does not retain coffee fines the way a sintered mesh screen does. The smooth etched surface rinses more easily, reducing the effort required to keep the screen clean between shots or after a brewing session.\u003c\/p\u003e\n\u003cp\u003eNew to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the \u003ca href=\"https:\/\/flairespresso.com\/pages\/learn\" target=\"_blank\" rel=\"noopener\"\u003eFlair Espresso Learn page\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flair Espresso","offers":[{"title":"Default Title","offer_id":68416903151837,"sku":"FLR-35114333N","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/3315\/1709\/files\/01-flair-58-etched-screen-3-small.jpg?v=1793761518"}],"url":"https:\/\/coffeeroastco.com\/es\/collections\/flair-espresso.oembed","provider":"CoffeeRoast Co.","version":"1.0","type":"link"}